• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.839-845
• /
• 2021

In this study, it shows the efficiency of each refrigerant through simulation method for ORC (Organic Rankine Cycle) power generation that converts waste heat discarded by ship exhaust into electricity for the purpose of reducing CO₂ emission and increasing ship waste heat recovery. by Simulation was performed with waste heat from the exhaust gas which is relatively high temperature and cooling sea water which is relatively low temperature from ships. As a result of the sea water cooling ORC power generating system, efficiency of the working fluid with R717 is highest as a 2.86 % and the next working fluid is R152a, R134a, R143a and R125a.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.175-181
• /
• 2018

Electric pump system is new technology for next generation propulsion unit. The system has simple structure which dose not need gas generator, injector and turbine and might better pump for low cost and low payload rocket. Therefore, this paper suggests conceptual design of electric-pump Permanent-Magnet Synchronous Motor (PMSM) which has 50 kW & 50,000 RPM for rocket. To satisfy the system's requirement, electromagnetic analysis is conducted for suitable inner and outer diameter of stator and rotor which uses 4000 Gauss cylinder magnet and Inconel 718 can to fix whole rotor. Futhermore, to confirm rotational vibration, rotordynamics analysis is conducted. By this analysis, Campbell diagram is printed. From the diagram, natural frequency could be determined for the only motor and dynamo meter test bench.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1423-1432
• /
• 2011

Since the marine accidents increase with the increased volume of traffic, preventive surveillance technology for safety navigation of the ships before the accident is being emphasized to secure the safety at sea along with post-accident measures. This paper aims to suggest a design based on an integrated safety management platform systems to support nautical safety, implements of bridge operation terminal equipments and alarm system for bridge watch monitoring and abnormal state of navigation/propulsion/machinery/power, and performs a quality evaluation for the actual boarding on the ship based on the classification standards.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.552-560
• /
• 2014

Pulse Detonation Engine(PDE) has been investigated as a next generation propulsion system with the advantages of the higher thermal efficiency by the compression effect and the wide operation ranges from zero speed at ground. In the present study, an efficient theoretical PDE performance prediction program was developed for realistic propellants based on the Endo's theory combining the Chapman-Jouguet detonation theory and expansion process of burnt gas in a constant area tube. The program was validated through the comparison with the experimental data obtained by a ballistic pendulum measurement. PDE performance analyses were carried out for various hydrocarbon fuels and oxidizer compositions by changing the mixture equivalence ratio and initial conditions. Theoretical PDE performance database could be established as a result of the analyses.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.544-551
• /
• 2014

A program of launch vehicle performance analysis is composed for the education of the conceptual design of launch vehicles and the requirement analysis for the propulsion system design. The program is applied for the mission analysis of space launch vehicles based on KSLV-II with liquid rocket boosters. The 75-ton class liquid rocket engine is assumed for the boosters by referring the mass ratio of KSLV-II second stage. The launch performance analysis is carried out for KSLV-II with 2, 3 and 4 boosters by targeting the circular orbit of 700 km altitude. The trajectory is assumed as two-dimension considering the variation of the flight environment. Payload of advanced KSLV-II could be increased to maximum 3 tons, though it is limited by the thrust performance of the upper stage.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.745-751
• /
• 2014

For the multi-nozzle propulsion, the rupture pressure of nozzle closure has an effect on the initial strain rate of ignition. Moreover, the deviation of rupture pressure for each nozzle closure leads to side forces which can disturb the attitude control of rocket. When designed, it should be considered whether nozzle closures are ruptured equally and exactly in the intented pressure. In this paper, the rupture behavior is analyzed by analytical and experimental methods for plate and "+" notched nozzle closures. The rupture pressure and deviation for operating temperature, whether notched or not and notched directions are analyzed. This paper provides a comparison between rupture pressure prediction of finite elements method which tool is Abaqus/Explicit and results of the rupture test. Jonson-Cook shear failure model which corresponds to the damage initiation criterion were used in this simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.114-123
• /
• 2002

A supersonic rocket plum flowfield of kerosene/liquid-oxygen based propulsion system has been analysed using the Reynolds-averaged Navier-Stokes equations coupled with a 9-species 14-reaction finite-chemistry model. The result were compared with chemically frozen flow solution to investigate the effect of finite-rate chemistry on the plume flowfield. The computations were performed using a commercial CFD software, FLUENT 5. The finite-rate chemistry solution exhibited higher temperature caused by the reactions within the nozzle. All the chemical reactions within the plum were dominated only in the shear layer and behind the barrel shock reflection region where the temperatures are high and the effect of finite-rate chemical reactions on the flowfield was found to be insignificant. However, the present plume computation including the finite-rate chemical reaction within the plume has revealed major reactions occurring in the plum and their reaction mechanisms.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.518-523
• /
• 2008

Using network communication, KTX OBCS is KTX's core device which inspects operation status of various electric equipments and supports driving command, train control, train's maintenance, train crew's driving. Since this device is manufactured as specialized system, being dependent on TGV manufacture specification and France's high speed train operation method, actual technic transfer is difficult. Therefore, there are many difficulties, since most of interface signals are connected with OBCS when function improvement, maintenance, various electric equipments(propulsion control device, auxiliary power supply device, door control device etc.) are replaced with localized ones, which are required in operational view after introduction of KTX. Ergo, this study would like to contribute to function improvement and maintenance's efficiency, furthermore to realize technical independence, escaping from dependency of developed foreign technology in high speed train and electric equipments, through KTX OBCS' function analysis and mutual interface information analysis with peripheral device(driver console, PID system, fault display device, various electric equipments).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.805-811
• /
• 2010

When we design a product, we spend a considerable amount of time in designing fasteners and their mating parts. Fasteners have special features because of which they are widely used and well standardized. Although we use some equations to design the fasteners, we should select these fasteners from the standardized table. In order to design them quickly using the CAD system, we proceeded as follows. First, we prepared some standardized shapes of fasteners to design them automatically. Next, we built a database of some fasteners such as a tension bolt, lock wire, thread, pin, and snap ring. Then, we used the design equations to quickly and precisely calculate the various parameters. Finally, we used a configuration design method to generate the shapes automatically using the results of the calculation and the values retrieved from the database. We applied this approach to the design of a propulsion structure, and demonstrated that this approach worked well and saved considerable time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.849-854
• /
• 2013

Many researches on green ship with increasing on economics, efficiency and convenience have been carried out consistently. One of them is development of diesel engines with electronic control. While small duty one for automobiles had been adopted mainly already, disseminating heavy duty one for ships has trouble due to safety and reliability. In order to solve these problem in this study, performance of electronic control and cam type engine installed in parallel on training ship HANBADA of korea maritime university was analyzed and compared. It is certain that specific fuel oil consumption of the electronic control type is lower than cam type and excellent at lower engine load, especially. And the electronic control type shows more effective characteristic at sea trial on specific fuel oil consumption.