• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.263-271
• /
• 2021

Optoelectronic shooting training systems are used in shooting training sites to improve the accuracy of shooting by tracking the trajectories of gun movements. However, optoelectronic-based systems have limitations in terms of cost, complexity of installation, and the risk that electronic targets may be broken. In this study, we developed and verified a shooting training system that measures postural tremors using a low-cost accelerometer. The acceleration sensor module was designed to be attached to the air cylinder of a gun. Postural tremors were evaluated based on amplitude, frequency, and spatial pattern index, which were computed using acceleration data. The postural tremor indices between the accelerometer and optoelectronic-based system were highly correlated (left-right and up-down directions: r = 0.76 and r = 0.70, respectively). We validated the developed shooting training system using an independent two-sample t-test, which identified a significant difference (p < 0.05) in the calculated postural tremor index according to the athlete's shooting score (i.e., best and worst shots).

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.403-411
• /
• 2023

Functional ultrasound imaging, such as elasticity imaging and micro-blood flow Doppler imaging, enhances diagnostic capability by providing useful mechanical and functional information about tissues. However, the implementation of functional ultrasound imaging poses limitations such as the storage of vast amounts of data in Radio Frequency (RF) data acquisition and processing. In this paper, we propose a sub-Nyquist approach that reduces the amount of acquired axial samples for efficient shear-wave elasticity imaging. The proposed method acquires data at a sampling rate one-third lower than the conventional Nyquist sampling rate and tracks shear-wave signals through RF signals reconstructed using band-pass filtering-based interpolation. In this approach, the RF signal is assumed to have a fractional bandwidth of 67 %. To validate the approach, we reconstruct the shear-wave velocity images using shear-wave tracking data obtained by conventional and proposed approaches, and compare the group velocity, contrast-to-noise ratio, and structural similarity index measurement. We qualitatively and quantitatively demonstrate the potential of sub-Nyquist sampling-based shear-wave elasticity imaging, indicating that our approach could be practically useful in three-dimensional shear-wave elasticity imaging, where a massive amount of ultrasound data is required.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.421-433
• /
• 2011

The importance of acquisition of road information has recently been increased with a rapid growth of spatial-related services such as urban information system and location based service. This paper proposes an automatic road extraction method using object-based approach which was issued alternative of pixel-based method recently. Firstly, the spatial objects were created by MSRS(Modified Seeded Region Growing) method, and then the key road objects were extracted by using properties of objects such as their shape feature information and adjacency. The omitted road objects were also traced considering spatial correlation between extracted road and their neighboring objects. In the end, the final road region was extracted by connecting discontinuous road sections and improving road surfaces through their geometric properties. To assess the proposed method, quantitative analysis was carried out. From the experiments, the proposed method generally showed high road detection accuracy and had a great potential for the road extraction from high resolution satellite images.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.212-212
• /
• 2014

이트리아 안정화 지그코니아(Yttria-stabilized zirconia, YSZ)는 이트리아의 첨가에 의해 지르코니아에 생성된 산소 빈자리(oxygen vacancy)로 $O^{2-}$ 이온이 전도성을 가지게 되는 특징이 알려지면서 최근 고체산화물 연료전지연구에서 많은 관심을 받고 있다.[1] YSZ를 기반으로한 고체산화물 연료전지의 특성을 개선하기 위해서는 YSZ 내에서의 산소교환 메카니즘을 이해하는 것이 매우 중요하다. 본 연구에서는 $^{18}O2$ 추적 기체(tracer gas) 이용하여 확산된 YSZ박막에서의 산소 확산 거동을 초미세이차이온질량분석기(Nano Secondary Ion Mass Spectrometry, Nano SIMS)를 이용하여 조사하였다. Nano SIMS는 작은 입사 이온빔의 크기를 구현할 수 있고, 다중검출기를 이용하여 높은 질량분해능으로 간섭없이 산소동위원소를 동시에 모두 검출할 수 있는 장점이 있다. 본 발표에서는 Nano SIMS를 이용한 YSZ박막에서의 산소 거동 평가 결과를 상세하게 보일 것이다.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.323-335
• /
• 2012

In this paper, we propose an AR(augmented reality) system using user's bare hand based on computer vision. It is important for registering a virtual object on the real input image to detect and track correct feature points. The AR systems with markers are stable but they can not register the virtual object on an acquired image when the marker goes out of a range of the camera. There is a tendency to give users inconvenient environment which is limited to control a virtual object. On the other hand, our system detects fingertips as fiducial features using adaptive ellipse fitting method considering the geometric characteristics of hand. It registers the virtual object stably by getting movement of fingertips with determining the shortest distance from a palm center. We verified that the accuracy of fingertip detection over 82.0% and fingertip ordering and tracking have just 1.8% and 2.0% errors for each step. We proved that this system can replace the marker system by tacking a camera projection matrix effectively in the view of stable augmentation of virtual object.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.689-698
• /
• 2021

In this paper, lane recognition, steering control and speed control algorithms were developed using Bluetooth wireless communication and image processing techniques. Instead of recognizing road traffic signals based on image processing techniques, a methodology for recognizing the permissible road speed by receiving speed codes from electronic traffic signals using Bluetooth wireless communication was developed. In addition, a steering control algorithm based on PWM control that tracks the lanes using the Canny algorithm and Hough transform was developed. A vehicle prototype and a driving test track were developed to prove the accuracy of the developed algorithm. Raspberry Pi and Arduino were applied as main control devices for steering control and speed control, respectively. Also, Python and OpenCV were used as implementation languages. The effectiveness of the proposed methodology was confirmed by demonstrating effectiveness in the lane tracking and driving control evaluation experiments using a vehicle prototypes and a test track.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1539-1542
• /
• 2009

최근 모바일 단말 기술과 정보통신 기술의 급격한 발달로 국내외 이동통신사들은 새로운 킬러 콘텐츠로 주목받고 있는 모바일 3D 게임을 앞 다투어 제작 및 서비스하고 있다. 모바일 3D 게임의 경우, 용량 증가로 인한 데이터 통신비 부담을 줄이기 위하여 PC 다운로드 S/W을 통한 다운로드 방법이 제공되면서 불법 복제 우려에 대한 관심이 높아지고 있다. 현재 불법 복제 방지와 관련하여 GVM/GNEX 인증 모듈이 적용되고 있으나, 모바일 3D 콘텐츠에 대한 저작권 보호 기술 및 워터마킹 기술을 적용함으로써 콘텐츠 접근제어 및 불법배포 추적을 동시에 달성할 수 있다. 따라서 본 논문에서는 모바일 3D 콘텐츠의 저작권 보호를 위하여 익명 Buyer-Seller 워터마킹 프로토콜 상에서 3D 콘텐츠 내의 공간영역 및 암호화 영역 내에 다중 워터마크를 삽입하는 방법을 제안한다. 성능평가를 위한 비가시성 및 강인성 실험을 통하여 본 제안 기법의 콘텐츠 접근제어가 가능하며 비가시성, 강인성 면에서 우수함을 확인하였다.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.12
• /
• pp.549-560
• /
• 2015

There is a wide variety of data quality attributes such as the ones proposed by the ISO/IEC organization and also by many other domestic and international institutions. However, it takes considerable time and costs to apply those criteria and guidelines to real environment. Therefore, it needs to define data quality evaluation attributes which are easily applicable and are not influenced by organizational environment limitations. The purpose of this paper is to derive data quality attributes and order of their priorities based on customer requirements for managing the process systematically and evaluating the data quantitatively. This study identifies the customer cognitive constructs of data quality attributes using the RGT(Repertory Grid Technique) based on a Korean quality standard model (DQC-M). Also the correlation analysis on the identified constructs is conducted, and the evaluation attributes is prioritized and ranked using the AHP. As the results of this paper, the consistent system, the accurate data, the efficient environment, the flexible management, and the continuous improvement are derived at the first level of the data quality evaluation attributes. Also, Control Compliance(13%), Regulatory Compliance(10%), Requirement Completeness(9.6%), Accuracy(8.4%), and Traceability(6.8%) are ranked on the top 5 of the 19 attributes in the second level.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.11-19
• /
• 2005

With the development of IT technologies, IT environment is making great change over life whole and is displacing business and business achievement systems of industry at the fast speed. The system which is proposed in this paper, supports environments to share codes, execution files and objects between project teams to maximize productivity and efficiency in web environments. Through impact assessment which is achieved at correction and development of existing programming codes by maintenance requirements, it minimizes obstacle occurrence factors and supports tracing obstacle sources. Through conversion the correction and development histories of existing sources and executable files between project teams to XML documents suitable to share in web, it stores them to relational database. In this paper, through impact assessment and change management for the correction and development of applications in the existing system development environments, we support efficient IT developments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.971-975
• /
• 2009

본 연구에서는 격자강우량과 GIS와 연계한 격자기반의 공간수문자료들을 모형의 입력매개변수로 활용하고, 수계망을 통하여 유역 출구까지 운동파(kinematic wave)이론에 의해 유출량을 물리적으로 추적해 나가는 격자기반의 분포형 강우-유출모형인 K-DRUM(Kwater Distributed RUnoff Model)을 개발하였고, 지표유출량에 가장 큰 영향을 주지만 실제 관측 및 적용이 용이하지 않은 유역의 초기토양함수상태에 대한 자동보정기법을 개발하였다. 개발된 자동보정기법을 이용하여 남강댐유역을 대상으로 적용가능성을 평가하였다. 연구에서 사용한 강우사상은 남강댐 유역에 큰 영향을 준 태풍 루사 (2002년 8월 31일 01시$^{\sim}$9월1일 23시), 태풍 매미 (2003년 9월 12일 01시$^{\sim}$9월13일 23시), 2004년의 대류성강우 (2004년 7월14일 01시$^{\sim}$7월 16일 10시) 및 태풍 에위니아 (2006년 7월 8일 18시$^{\sim}$7월11일 12시)의 총 4개의 사상을 대상으로 하였다. 개발한 유역의 초기토양함수상태 자동보정기법에 의한 유출모의의 적용성을 검토하기 위하여 모의에 사용된 매개변수 중 토지피복도에 의해 결정되는 조도계수와 토양도에 의해 결정되는 유효토심, 흡인수두계수, 공극률 및 투수계수는 4개의 강우사상에서 모두 동일한 조건으로 설정하였고, 유역내 토양 내부 수분함유량 산정을 위한 초기 기저유출량은 검토대상 기간 시점부에서 관측된 유출량으로 설정하였다. 초기토양함수상태 자동보정기법 적용을 통한 유출해석의 정확도는 체적오차 백분율(VER)과 첨두 유량 오차 백분율(QER)을 이용하여 평가하였으며, 이를 통해 본 모형이 유출량에 대한 정확성을 확보하고자 하였다. 본 연구에서 개발된 자동보정 기법을 적용한 결과, 초기토양조건을 설정하는데 있어서 기존의 시행착오법으로 인해 소요되는 시간과 유역내 토양 특성과 지형형상을 고려하지 않는 설정으로 인해 발생될 수 있는 문제점을 해결할 수 있었으며, 유출계산 결과도 유량의 크기와 첨두시간 모두 관측값과 비교적 잘 맞는 것을 확인할 수 있었다.