• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1108-1111
• /
• 2017

The nozzle exit shape is scarfed according to the external shape of missile when the nozzle axis should be canted from missile axis due to missile system application. There is inevitable thrust loss for the scarfed nozzle comparing to non-scarfed nozzle. The numerical analysis is necessary to calculate the thrust loss in design process, and ground tests of rocket motor were performed to verify the calculation results. From the comparison of non-scarfed nozzle and scarfed nozzle experiment results, the thrust loss from calculation was about 16.6% and that from experiments was about 15.0%.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.77-79
• /
• 2006

본 논문에서는 Brushless DC Motors(이하 BLDC Motor이라 함)의 비대칭 영구자석 오버행 구조에 의한 Z축 방향 추력, 진동 특성을 연구하였다 무부하인 경우에는 Z축방향 추력이 일정하므로 베어링에 하중으로만 작용하여 진동은 발생하지 않는다. 그러나 코일전류가 증가할수록 코일전류에 의한 증자, 감자작용으로 인하여 자속에 리플이 발생하며 Z축 방향 추력도 리플은 물론 진동이 발생한다. 따라서, 븐 연구에서는 전기자 전류 변화에 따른 자속밀도 및 Z축 방향 추력 특성을 해석하였으며 이를 실험치와 비교하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.55-59
• /
• 2008

It is very difficult to measure an accurate thrust for the performance test of liquid rocket engine. Liquid rocket engine is attached to the propellant feed system, control valve and many other safety systems. Without considering these effects, thrust data measured from the firing test is not reliable and meaningless. In this research, the modified thrust measurement system, which includes both all these side effects is developed for the verification of low thrust liquid rocket engine performance. In addition, reliability appraisal technique is studied to secure the reliability of thrust measurement system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.496-501
• /
• 2009

The thruster head unit of a 300 W cylindrical Hall thruster was developed for the propulsion system of small satellites. The magnetic topology in the thruster channel is a key parameter to achieve high performances. Two types of magnetic circuit structures were designed and manufactured to compare the thrust levels and efficiencies. Also the endurance test was conducted to measure the stable operation duration of the thruster head and to find degree of erosion after extended operation.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.88-94
• /
• 2008

In this study, triaxial velocity is analyzed for COMS(Communication, Ocean and Meteorological Satellite) configuration, which is generated when thrusters are used to dump wheel momentum. Since COMS is designed to periodically change the thruster set in order to uniformly decrease the performance of thrusters, triaxial velocity would be different during the change of thruster set. So, the triaxial velocity generated due to the change of thruster set is optimized.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.192.2-192.2
• /
• 2016

전기추력기는 화학식 추력기에 비해 비추력이 높아 인공위성의 자세제어, 궤도수정, 궤도천이를 포함한 행성 탐사활동 및 우주 임무수행을 위한 우주선의 엔진 등으로 다양하게 활용된다. 홀 추력기는 전기추력기 중 하나로 고리형 방전공간을 가진 고리형 추력기와 원통형 방전영역을 가진 원통형 추력기가 있으며, 원통형 추력기는 고리형에 비하여 넓은 방전공간으로 저전력 방전에 적합한 추력기이다. 또한, 저전력 추력기는 큐브셋(cubesat) 및 마이크로 위성(microsatellite)의 증가하는 수요에 따라 필요성이 증가하고 있으며, 활용도가 높아 다양하게 연구 및 개발되고 있다. 홀 추력기는 자기장과 전기장을 서로 수직되게 인가하여, 자화된 전자는 플라즈마 방전을 유지시키고 자화되지 않은 이온은 전기장 방향으로 가속되어 이온빔을 발생시킨다. 하지만, 저전력 소형 추력기는 작은 소모전력과 방전채널로 인한 성능 저하 및 자기장 구조 설계 등 많은 어려움들을 가지고 있다. 본 연구에서는, 약 50 W급의 소모전력을 바탕으로 영구자석을 이용한 저전력 플라즈마 추력기를 개발하였다. 방전 채널은 지름 15 mm, 길이 16 mm, 무게는 약 0.6 kg으로 원통형 구조의 채널로 제작되었으며, 약 1500-2000 G의 자기장 세기를 갖도록 설계하였다. 방전 기체는 제논을 사용하여 1-5 sccm영역에서 방전 특성을 살펴보았으며, 방전 전류는 0.02-0.4 A로 나타났다. 100-550 V영역에서 방전을 시도하였고, 채널길이를 16-24 mm 에서 약 1mN 급의 추력특성을 보였다. 본 발표에서, 홀 추력기의 제작 특성과 성능 및 플라즈마 특성에 대한 더 자세한 연구결과가 발표될 예정이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.365-368
• /
• 2009

A new concept of a small thruster for altitude control of a micro/nano class satellite is developed, which utilizes the pulsed laser energy. As the laser-based thruster does not require burning of any fuel, it gives promise of small satellite design criteria, namely light weight and cost effectiveness. In this paper, we develop gel-type material for generating strong plasma plume for enhancing thrust for propulsion. Moreover, we quantify the level of thrust via the momentum coupling coefficient measured by the pendulum system. We discover that the driving force is significantly improved via the gel-typed propellant for laser ablation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.135-140
• /
• 2007

An analysis has been conducted of the optimal condition to maximize the specific impulse for a liquid rocket engine with film cooling. The present engine performance has been compared with the published conceptual design to be verified satisfactorily accurate. The optimal combination of film coolant flow rate and the regenerative cooling capacity has been found for maximum specific impulse. The optimal fuel pump pressure increases and the optimal film coolant flow decreases for a larger thrust engine. Higher turbine inlet temperature increases both the fuel pump pressure and the film coolant flow rate as the optimal condition. The coking temperature has the same qualitative effect as the turbine inlet temperature.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.55-62
• /
• 2011

In this study, we tried to improve the thrust control performance through the thrust control combustion experiment of the hybrid rocket. We constructed the system which controls the oxidizer flow by combining a needle valve with a stepping motor and controlling the stepping motor drive according to the thrust control command order. Gas oxygen was used as the oxidizer for two different propellants, PE(Polyethylene), PC(Polycarbonate), respectively. To improve the slow response time and the oscillation phenomenon in the beginning stage of the thrust control combustion experiment, we measured and analyzed the change of the flow speed of the propellant pipe. The revised thrust control combustion experiment showed that the thrust was stably controlled with the margin or error from the thrust command within ${\pm}1$ N.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.43-53
• /
• 2022

In this study, analysis of the flow characteristics of pintle-controlled nozzle with split-line TVC system and the thrust performance prediction was performed. The numerical computation was verified by comparing the thrust coefficient derived from the analysis results with the experimental data. By applying the same numerical analysis technique, the flow characteristics of nozzle were confirmed according to operating altitude, pintle stroke position and TVC angle with the 1/10 scale. As the TVC angle increased, thrust loss occurred and the tendency of AF was different depending on the position of the pintle stroke. Based on the analysis results, the relation of thrust coefficient was derived by applying the response surface methods. The thrust performance model with a slight difference of 1.2% on average from the analysis result was generated.