• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.590-590
• /
• 2015

본 연구는 집중호우에 의한 홍수예측 및 소유역의 유출거동에 대한 수문학적 민감성(susceptibility) 규명을 목적으로 강우강도, 지속기간 및 토양포화도 변화에 따른 홍수유출특성을 분석하여 유역의 유출거동 민감성을 표출할 수 있는 노모그래프를 개발하였다. 개별 홍수사상에 대한 유출거동 특성 분석을 위하여 한국건설기술연구원의 대표 시험유역인 설마천 유역의 과거 17년간(1996 ~ 2012)의 10분 간격의 강우량 및 유출량 자료를 수집하여 홍수유출해석을 수행하였다. 설마천 시험유역의 일누가강우량 100mm 이상, 50개 홍수사상에 대한 홍수유출해석은 유역 물순환 해석모형인 CAT(Catchment hydrological cycle Assessment Tool)을 이용하였으며 모의결과를 바탕으로 홍수사상별 지체시간, 강우강도, 지속기간 및 토양포화도 변화에 따른 홍수유출특성을 상세히 분석하였다. 이 중에서도 지체시간은 유역반응을 나타내는 시간변수로서 수문모델링 및 홍수량예측에 매우 중요한 요소이다. 특히, 강우량에 대한 홍수량의 반응이 빠른 소유역의 경우에 홍수량예측에 큰 영향을 미친다. 따라서 강우강도, 지속기간, 토양포화도의 변화량에 대한 지체시간의 거동을 R 프로그래밍 언어 및 3D Surfer를 이용하여 분석한 후 최종적으로 소유역의 홍수유출 특성을 나타내는 3차원 홍수 유출특성 노모그래프를 개발하였다. 분석에 사용된 R 프로그래밍 언어는 통계 계산과 그래픽을 위한 프로그래밍 언어이자 소프트웨어 환경으로 데이터의 조작 및 수치연산, 시각화를 수행할 수 있는 기능을 여러 패키지를 통해 구현할 수 있다. 따라서 본 연구에서는 R을 이용하여 10분 단위의 강우 및 유출량 자료를 1시간 및 1일 자료로 구축하고 17년간의 과거 홍수사상을 분리하여 추출하는 R 홍수유출해석 시스템을 개발하였으며 추출된 홍수사상을 관측 유출량 및 관측 토양수분을 포함하여 시각화함으로써 강우 및 토양수분 변화에 따른 소유역의 유출거동 민감성을 확인할 수 있었다. 분석 결과, 지체시간은 강우지속기간 및 토양포화도에 민감한 거동특성을 나타냈으며 토양포화도는 첨두홍수량의 변화에 민감한 영향을 주는 것으로 확인되었다. 개발된 3차원 홍수유출특성 노모그래프는 유역의 규모 및 지형물리학적 특성에 따라 다양하게 나타날 것으로 판단되며 여러 계측유역에 적용함으로써 유역별 홍수유출 반응특성을 정량화할 필요가 있다. 즉, 강우강도, 지속기간, 지체시간, 포화도 등의 변화에 따른 유역의 홍수유출 반응특성을 규명함으로써 미계측 유역의 홍수량예측 실무에 활용할 수 있을 것으로 판단된다.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.511-523
• /
• 2014

Limit equilibrium analysis and finite difference analysis were used to evaluate slope stability in the in Gohan, Korea, which is affected by large-scale tensile cracks and uplift. There is a thick colluvial layer in the study area and predicting ground behavior is problematic because the presence of clay makes it difficult to determine the strength parameters of the soil. Consequently, a numerical model able to reflect the collapse properties of the site was required that applied the modified boundary layer model and calculated the strength parameters using back analysis. The numerical simulation results that consider the strength parameter one does with the present situation the establishment of the pile is completed, and the simulation is able to asses ground stability in complex terrain in a reliable manner. Also the somewhat it judges with the fact that it will be able to provide the fundamental data which secures the stability of the segment where it is unstable.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.237-250
• /
• 2015

Underground structures such as a tunnel have been considered as safer than structures on the ground during earthquake. However, severe damages of underground structures occurred at subway tunnel during 1995 Kobe Earthquake and such damages are gradually increased. In this study, a dynamic behavior of a cut and cover tunnel surrounded by weathered soils is investigated using Mohr-Coulomb Model. Parametric study was carried out for boundary conditions, tensile strength, and earthquake magnitudes. The results of numerical analyses in terms of ground deformations and stresses acting on the lining were quite dependent on the side boundary condition (free or fix conditions) and tensile strength of surrounding soils. The ground was deformed upward at the end of earthquake when the side boundary condition was fixed, whereas residual deformations were not predicted when it was free. When the tensile strength of a soil was set to the same as its cohesion, residual deformation was less than 1cm, regardless of side boundary conditions or input accelerations. In addition to that, stress conditions at the maximum deformation and end of earthquake were within an allowable range and considered as safe. Proper boundary conditions and material properties such as tensile strength are quite important because they may significantly impact on the results of dynamic analyses.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.315-321
• /
• 2009

The Very Large Marine Structure has been widely used new method of ocean space instead of method for reclamation Therefore, VLFS is proposed to coincide on such request. It can be established regardless of nature of soil and height of water, and stream of flow exists under the floating structure, there is seldom effect in natural environment. Fuertherrnore, it can do easily to do assembly and taking to pieces due to expansion or removal. Based on the regulation by class, VLFS have to possess more than enough structural strength against severe wave loading induced by green sea condition Therefore, There are performed structural simulation as well as experimental test about expected loading scenario in order to examine the safety of structure. Up to now, various examinations based on the strength limit value of the main structural material have been done based on the elasticity response analysis. However, there is little finding about the collapse behavior and the safety when the load that exceeds the collapse of the material acts. In the present study, we investigated the collapse behavior based on the ultimate limit state calculated by FE-analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.423-430
• /
• 2010

Hot closed-forging process and the die used for forming an automotive flange were analyzed from the viewpoints of heat transfer, grain-flow lines, and stresses to obtain a forged product without defects such as surface cracks, laps, cold shots, and partial filling. The forging process including up-set, pre-forging, final forging and pressing forces was investigated using finite element analysis. The influence of the preform die and the ratio of the heights of the upper die to lower die on the forging process and die were investigated and a die shape ($10^{\circ}$ for the preform die, and 1.5:1 ratio for the final die) suitable to achieve successful forging was determined on the basis of a parametric study. All parametric design requirements such as strength, full filling, and a load limit of 13,000 KN were satisfied for this newly developed flange die. New dies and flanges were fabricated and investigated. Defects such as partial filling and surface cracks were not observed.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.444-454
• /
• 2003

Rock fragmentation technique by cutter penetration has widely been used in the mechanical tunnel excavation. Microcracks propagate and interact because of locally concentrated high stress induced by cutter penetration. which is caused by heterogeneity of rocks. In this study Weibull distribution function and degradation index are used to consider the strength heterogeneity of a rock and the degradation of rock properties after failure. Through the numerical analyses, it is shown that the lateral pressure has an important influence on the rock fragmentation. In the single cutter penetration, large chips are formed as lateral pressure increase. The cutter spacing is also an important factor that affects the rock fragmentation in the double cutter penetration. The fragmentation efficiency of the double cutter penetration is better when cutter spacing is 70 mm than 40 mm and 100 mm. From the results, it is expected that this study can be applied to a TBM tunnel design by understanding of chipping process and mechanism of rock due to cutter penetration.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.343-351
• /
• 2005

This study developed a shear strength prediction model of FRP strengthened reinforced concrete beams in shear. The primary design parameters were shear crack angle and shear span to depth ratio of FRP reinforcement. Of primary concern In the suggested model was the FRP debonding failure, which Is a typical fracture mode of RC beams strengthened with FRP, The proposed model used a crack sliding model based on modified plasticity theory. To address the effect of the shear span to depth ratio, the arch action was considered in the proposed model. The proposed model was applied to RC beams strengthened with FRP. The results showed that the proposed model agree with test results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.414-414
• /
• 2015

최근 지구온난화로 인한 기상변동성 증가로 인해 극한기후현상의 발생빈도가 점차 증가하고 있으며 유역단위의 수자원을 효율적으로 운영하는데 문제점을 해소하고자 다양한 측면에서 체계적인 수자원 운영을 위한 연구가 이루어지고 있다. 수공구조물을 설계하는데 있어서 가장 일반적인 가정 사항은 수문모형에 사용되는 강우의 빈도와 유출의 빈도가 동일하다는 가정에 근거한다. 즉, 유역의 초기함수조건, 강우강도, 강우의 시간적 분포와 관계없이 동일한 빈도로 고려되는 문제점이 있다. 이러한 점에서 비교적 장기간의 자료를 확보하고 있는 계측유역에 대해서 다변량 확률밀도함수를 적용하여 비선형관계를 고려한 수문빈도해석기법을 개발하고자 한다. 본 연구에서는 이변량 분석기법(bivariate analysis) 중 전통적인 이변량 분포에 비해 주변분포형(marginal distribution)을 자유롭게 선택할 수 있는 장점이 있는 추계학적 Copula 모형을 활용하여 댐 및 저수지 상류유역의 강우량과 유입량을 대상으로 이변량 분석을 수행하고자 한다. 최종적으로 비선형 관계에 있는 강수량과 유출량 사이에 이변량 빈도해석 모형을 개발하고 기존 해석방법과의 종합적인 비교를 실시하였다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.10
• /
• pp.61-74
• /
• 2018

In this study, the pull-out behavior of tunnel type anchorage of suspension bridges was analyzed based on results from laboratory size model tests and numerical analysis. Tunnel type anchorage has found its applications occasionally in both domestic and oversea projects, therefore design method including failure mode and safety factor is yet to be clearly established. In an attempt to improve the design method, scaled model tests were conducted by employing simplified shapes and structure of the Ulsan grand bridge's anchorage which was the first case history of its like in Korea. In the model tests, the anchorage body and the surrounding rocks were made by using gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests showed that the tunnel type anchorage underwent wedge shape failure. For the verification of the model tests, numerical analysis was carried out using ABAQUS, a finite element analysis program. The failure behavior predicted by numerical analysis was consistent with that by the model tests. The result of numerical analysis also showed that the effect of Poisson's ratio was negligible, and that a plugging type failure mode could occur only when the strength of the surrounding rocks was 10 times larger than that of anchorage body.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.4
• /
• pp.34-37
• /
• 2007

The safety of ships is one of the most important concerns in terms of the environment and human life. A ship in bad condition is likely to be subject to accidents, such as collision and grounding. When a ship has minor collision damages in the form of circle or ellipse, its ultimate strength will be reduced. It is important to evaluate the reduction ratio of a ship's ultimate strength that results from damages. The strength reduction of a plate with a cutout in the form of hole has been treated by many researchers. A closed-form formula for the reduction of ultimate strength of a plate, considering the effect of several forms of cutout, has been suggested. However, the structure of ships is composed of plates and stiffeners so-called stiffened plates and it is likely that plates and stiffeners will be damaged together in collisions. This paper investigates the effect of minor collision damages on the ultimate strength of a stiffened plate by using numerical analysis. For this study, the deformed shape of minor collision damages on a stiffened plate was made by using a contact algorithm and was used as the initial shape for ultimate stress analysis. Then, a series of nonlinear FE analyses was conducted to investigate the reduction effects on the ultimate strength of the stiffened plate. The boundary conditions were simply supported at all boundaries, and the tripping of stiffener was neglected. The results are presented in the form of reduction ratio between the ultimate strength of an original, intact stiffened plate and that of a damaged stiffened plate.