• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.50-54
• /
• 1995

선박의 구조설계단계에서 최종붕괴강도를 설계기준으로 삼는 경우는 거의 없으나 최근에 각국 선급에서 최종붕괴강도를 의무적인 설계기준으로 삼기 위해 자체적인 해석법과 설계식을 제시 하고 규정화하는 작업을 진행시키고 있다. [12, 17, 31, 32]. 1994년 ISSC [1]에서도 토론된바와 같이 특히 새로운 구조방식을 가진 선박의 합리적인 구조설계를 위하여는 해상플렛폼의 구조설 계시와 마찬가지로 삼아야 할 것이다. 본고에서는 선각거더의 최종붕괴강도에 대한 해석법과 간이계산식에 관한 연구동향을 문헌조사를 통하여 분석하였다. 그 결과 순수굽힘모멘트가 작용 하는 문제의 경우 최종붕괴강도 해석법은 어느정도 확립되었다고 판단되지만 최종붕괴강도의 간이계산식은 아직도 정도 등의 면에서 개선의 여지가 남아 있다고 생각된다. 앞으로 순수 굽 힘모멘트뿐만아니라 조합하중을 받는 경우와 피로균열을 비롯한 초기구조손상을 가진 노후화된 선박에 대한 최종붕괴강도를 보다 정밀하게 해석하기 위한 해석법의 개발과 간이계산식의 도 출이 필요하다고 사료된다. 또한, 충돌, 좌초, 폭발 등에 기인된 선각거더의 붕괴강도 평가를 위한 해석법의 개발도 앞으로 남은 과제중의 하나이다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.36-41
• /
• 2014

A floating offshore structure has high tendency to occur the buckling when compressive, bending and shear loads applied. When the buckling is occurred, in-plane stiffness of structure is remarkably decreased. And it has a harmful effect on the local structural strength as well as global structural strength. In the present study, it has been investigated the ultimate strength of tubular members which is located between a floater and a damping plate of the floating pendulum wave energy converter. Nonlinear finite element method is conducted using the initial imperfection according to 1st buckling mode which is obtained from the elastic buckling analysis. It is also noted the ultimate bending strength characteristic varying with a diameter, thickness and stiffeners of the tubular member.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.189-196
• /
• 1991

This paper is an illustration of the application of the reliability analysis to the transverse structure of a SWATH ship. The ultimate strength of plate members on the cross structure and upper part of strut are considered in the reliability analysis. The fatigue reliability analysis has been also carried out at the junction of cross structure, sponsors and strut. Included is also an example of the allowable fatigue damage level. Demonstrated is the reliability study of series system of which elements are the ultimate and fatigue failure as well. Doing this would be desirable to get a truer solution of the structural safety level. The paper ends with a brief summary of the present reliability study and same important points which may be useful at the design stage.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.57-66
• /
• 1989

In this paper, a theory for the static analysis of large plastic deformations of 3-dimensional frames, aiming at application to the collapse analysis of ship structures, is presented. In the frame analysis formulation, effects of shear deformations are included. A plastic hinge is inserted into the field of a beam end, and post. failure deformation of the plastic hinge is characterized by finite rotations and extensions. In order to model deep web frames of ship's structures into a framed structures, collapse of thin-walled plate girders is investigated. The proposed analysis method is applied to several ship structural models in the references.

• Composites Research
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2000

A numerical approach for predicting the ultimate strength of laminate composites has been studied using the Weibull distribution of the strengths of lamina plies. The probabilistic initial failure strengths of laminates were calculated using Tsai-Hill failure criterion. The ultimate strength of the laminate composites has been predicted using progressive failure analysis. The experimental results show that the strength prediction based on the Weibull distribution of ply strength reasonably agrees well with the experimentals better than equal strength assumption.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.117-124
• /
• 1991

In this paper, a method to overcome inefficiency of the finite element method in the calculation of compressive strength of one-sided stiffened plates, is proposed. In this method the collapse modes of stiffened plates are assumed as follows. a) Overall buckling $\rightarrow$ Overall collapse b) Local buckling $\rightarrow$ Overall collapse c) Local buckling $\rightarrow$ Local collapse In each collapse mode, shape of deflection is assumed, and then elastic large deformation analysis based on the Rayleigh-Ritz method is carried out. One-sided stiffening effect is considered by taking into account of the moment due to eccentricity. Plastic analysis by assuming hinge lines is also carried out. The ultimate strength of a stiffened plate is obtained as the point of intersection of the elastic analysis curve and the plastic one. From this study, it is concluded that the angles between the plastic hinge lines in plastic collapse mode are determined as the ones which give the minimum collapse load, and these angles are different from the ones assumed in the previous studies. Minimum stiffness ratios can also be calculated. Calculated results according to this method show good agreements with the results by the finite element method.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.169-181
• /
• 1991

In this study, an analytical solution of pre-buckling, buckling, post-buckling, ultimate strength and post-ultimate strength behaviour of simply supported rectangular plates subjected to biaxial compression is derived. Parametric study with varying the aspect ratio, the slenderness ratio and the loading ratio is carried out. The present solution may be used as basical data when the verfication of the numerical and experimental result is made.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.137-141
• /
• 2004

Ship structures are basically an assembly of plate elements and the load-carrying capacity or the ultimate strength is one of the most important criteria for safety assessment and economic design. Also, Structural elements making up ship plated structures do not work separately, resulting in high degree of redundancy and complexity, in contrast to those of steel framed structures. To enable the behavior of such structures to be analyzed, simplifications or idealizations must essentially be made considering the accuracy needed and the degree of complexity of the analysis to be used. On this study, to investigate effect of modeling range, the finite element method are used and their results are compared varying the analysis ranges. The model has been selected from bottom panels of large merchant ship structures. For FEA, three types of structural modeling are adopted in terms of the extent of the analysis. The purpose of the present study is to numerically calculate the characteristics of ultimate strength behavior according to the analysis ranges of stiffened panels subject to uniaxial compressive loads.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.41-47
• /
• 2004

Plate has cutout inner bottom and girder and Door etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and freight movement, piping etc.. Because cutout‘s existence is positioning in this place, and, elastic bucking strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic bucking strength and ultimate strength is one of important design criteria to decide structural elements size at early structure design step of a ship. Therefore, we need reasonable & reliable design formula for elastic bucking strength of the perforated plate. The author computed numerically ultimate strength change about several aspect ratios, cutout dimension, and plate thickness by using ANSYS Finite element analysis code based on finite element method in this paper.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.88-88
• /
• 2002