• 제목/요약/키워드: 최적 온도

Search Result 4,594, Processing Time 0.036 seconds

Distribution Patterns of Intrinsic Optimal Temperature, Optimal Development Temperature and Optimal Fecundity Temperature by Classification Group of Insects and Mites (곤충과 응애의 분류군별 공통고유최적온도, 발육최적온도 및 산란최적온도의 분포 양상)

  • Ahn, Jeong Joon;Choi, Kyung San
    • Korean journal of applied entomology
    • /
    • v.61 no.1
    • /
    • pp.165-172
    • /
    • 2022
  • Insects have evolved successfully by adapting to their environments through development and reproduction. Temperature-dependent models have been used to calculate the intrinsic optimal, optimal development, and optimal fecundity temperatures of insects and mites; for this study, we reviewed 112 works that focused on these parameters. The insects and mites investigated in this study include 14 Acari, 8 Coleoptera, 5 Diptera, 31 Hemiptera, 7 Hymenoptera, 18 Lepidoptera, 1 Orthoptera, 5 Psocoptera, and 5 Thysanoptera species. The results of this study showed that the interval distance between the intrinsic optimal and optimal fecundity temperatures was smaller than that between the intrinsic optimal and optimal development temperatures of the all insects and mites investigated except for those in the order Thysanoptera. We found that there is a close relationship between the intrinsic optimal and optimal fecundity temperatures.

Optimal Measuring Point Selection Method of Indoor Temperature using CFD Analysis (CFD 해석을 이용한 실내 온도 최적 측정 위치 선정 방법)

  • Lee, Min-Goo;Jung, Kyung-Kwon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.7
    • /
    • pp.1559-1566
    • /
    • 2012
  • This paper proposed the method to find out the optimal sensing point of temperature in test-bed with the sensor of temperature, such as real residence. We selected optimal locations by checking temperature change which was simulated by the means of CFD (Computational Fluid Dynamics) and the variation of air flow. We made 3-dimensional model of the testbed using DesignBuilder software, and ran the CFD. We selected the optimum temperature measurement location of 1.5 m height from the floor and low temperature variation. The experiments were conducted 30 temperature and humidity sensors in real place. After that, we confirmed the results of temperature change.

CFD Analysis Based Optimal Temperature Measurement (CFD 해석 기반 실내 최적 온도 계측)

  • Lee, Min-Goo;Park, Yong-Kuk;Jung, Kyung-Kwon;Yoo, Jun-Jae
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2011.05a
    • /
    • pp.735-738
    • /
    • 2011
  • This paper proposed the method to find out the optimal sensing point of temperature in test-bed with the sensor of temperature, such as real residence. We selected optimal locations by checking temperature change which was simulated by the means of CFD (Computational Fluid Dynamics) and the variation of air flow. We installed 30 temperature sensors in real place. After that, we compared the real one with the result of simulation.

  • PDF

온도-진동 복합요인에 대한 최적 시험방법에 관하여

  • Jang, Ju-Su
    • Journal of the KSME
    • /
    • v.49 no.12
    • /
    • pp.36-38
    • /
    • 2009
  • 일반적으로 부품 또는 유닛의 수명에 가장 직접적인 영향을 주는 요인은 온도 또는 진동으로 알려져 있다. 따라서 많은 시험방법이 개발되어 있으나 주어진 시간에 시험의 목적을 달성할 수 있는 최적의 방법론에 대해서는 드물게 연구되어 있는 실정이다. 이 글에서는 일반화되어 알려진 두 개의 모델을 복합하여 최적의 시험시간과 시험조건을 살펴보기로 한다.

  • PDF

Optimization Design of Floating PV Structure for Back Surface Temperature of PV Module (PV모듈의 배면온도를 고려한 수상 태양광발전 부유구조물의 최적 설계)

  • Kim, Seok-Ki
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1088-1089
    • /
    • 2015
  • 본 논문에서는 태양광발전시스템의 발전 효율을 극대화하기 위한 태양전지 모듈의 배면온도를 낮출 수 있는 부유구조물의 최적화 설계에 대한 것이다. 저수지 수면은 태양에너지를 흡수하게 되면 물 온도의 상승으로 밀도저하가 발생되고 저수지의 수면이 최상층에 위치하여 지속적으로 태양에너지가 흡수는 경우 최상층의 수면온도가 $60^{\circ}C$ 이상 상승하게 된다. 이는 태양전지 모듈의 배면온도 상승을 주도하여 시스템 발전량의 감소원인으로 작용한다. 수상 태양광발전시스템의 효율 향상을 위해 태양전지 모듈의 온도 저하가 반드시 필요하고, 더불어 저수지 지리적 요건에 따른 바람의 영향 등을 고려한 태양광발전 부유구조물 최적 설계가 요구된다. 열전달 수치해석을 통해 태양광발전 구조물에 대한 최적설계, 태양전지 모듈의 온도 측정 및 성능 검증을 통해 태양광발전 구조물의 상하단의 높이의 최적 설계 조건을 확립하였다.

  • PDF

TEM analysis of pits of GaN thin film grown on intermediate temperature (TEM을 이용한 저온성장된 GaN박막의 결함분석)

  • 손광석;김동규;조형균
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2003.03a
    • /
    • pp.105-105
    • /
    • 2003
  • InGaN/GaN MQW 구조는 청색 및 녹색 범위의 밴드 갭을 가지는 반도체로 최근 LED 및 LD 제조 등에 이용되고 있다. InGaN/GaN MQW은 InGaN와 GaN의 최적 성장온도의 중간온도에서 실행된다. InGaN와 GaN는 최적 성장온도의 차이가 크므로 중간온도에서 성장 시에 많은 결함이 생긴다. 성장온도가 높으면 InN가 분해되고 낮을 경우에는 질소의 결핍이 일어난다. 최적성장온도의 선택이 매우 중요한 문제로 주목되었다. Si 도핑으로 중간온도 성장 시에 형성되는 결함을 감소시키고 광학적 특성을 향상시킨다고 보고되었다. 그러나, Si 도핑효과에 대한 구체적이고 체계적인 연구는 부족한 실정이다. MQWs 구조의 GaN 장벽층에 미치는 성장온도와 Si 도핑 효과를 이해하기 위해서는 고온에서 성잠시킨 GaN박막(HT-GaN) 위에 중간온도에서 성장된 GaN 에피층(IT-GaN)의 구조에 관한 연구가 선행되어야한다. 본 연구에서는 HT-GaN 위에 성장된 GaN 에피층에 미치는 성장 온도와 Si 도핑 효과에 관해 연구하였다.

  • PDF

Optimal Positioning of Heating Lines in a Compression Molding Die Using the Boundary Element Method (경계요소법을 이용한 압축성형다이 가열선의 최적위치 설계)

  • 이부윤;조종래
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.17 no.6
    • /
    • pp.1478-1485
    • /
    • 1993
  • A shape optimization problem is formulated to determine the optimal position of heating lines in a compression molding die. The objective of the problem is that the cavity surface would be maintained by a prescribed uniform temperature. A boundary integral equation for the sensitivity of the temperature in terms of hole position is derived using the method of shape design sensitivity analysis. The boundary element method is employed to analyze the temperature and sensitivity field of the die. The sensitivity calculation algorithm is incorporated in an optimization routine. To demonstrate a numerical implementation, an example problem arising in thermal design of a compression molding die is dealt with, showing that the number of heating lines chosen for the die strongly affects the ultimate uniformity of the cavity surface temperature.

Process Optimization Using Regression Analysis of Distillation Processes for the Recovery of Propylene Glycol Monomethyl Ether Acetate (PGMEA) Containing Waste Organic Solvent (폐액 중 프로필 글리콜 모노메틸 에테르 아세테이트(PGMEA) 회수하는 증류공정에서 회귀분석을 이용한 공정 최적화)

  • Choi, Yong-Seok;Byun, Hun-Soo
    • Korean Chemical Engineering Research
    • /
    • v.53 no.2
    • /
    • pp.181-192
    • /
    • 2015
  • The aim of this study is to obtain optimum process condition for using two tower distribution to recycle the waste Propylene Glycol Monomethyl Ether Acetate (PGMEA) that is formed after washing LCD. The optimum process condition for the content of PGMEA, which is dependent variable, at 1st distillation was calculated according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures, and the optimum process conditions and optimum factors for the content of PGMEA at 2nd distillation according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures. At 1st distillation, Reflux amount, Feed amount, and Feed temperature are significant variables. However, it is found that the BTM temperature range is not significant in the range of process condition used in this study. The optimum process conditions are based on $5700{\ell}$ of Feed amount, $2500{\ell}$ of Reflux amount, $165^{\circ}C$ of BTM temperature, and $130^{\circ}C$ of Feed temperature. For the this condition, the predicted content of PGMEA was calculated as 92.12~94.62%. Significant factors at 2nd distillation are Reflux amount, Feed amount, and BTM temperature. Multicollinearity is between Reflux amount and BTM temperature. BTM was omitted in the multiple regression equation because there is a strong positive correlation between Reflux amount and BTM temperature. Base on $199^{\circ}C$ of BTM temperature, The optimum process conditions are based on $4275{\ell}$ of Feed amount, $6200{\ell}$ of Reflux amount and $130^{\circ}C$ of Feed temperature. In this condition, the predicted content of PGMEA was calculated as 99.0~99.5%.

Comparison of Cardinal Temperatures of Lettuce Using Bilinear, Parabolic, and Beta Distribution Functions (선형, 쌍곡선과 Beta 함수를 이용한 상추의 주요 온도 비교)

  • Cha, Mi-Kyung;Kim, Chun-Sik;Austin, Jirapa;Cho, Young-Yeol
    • Journal of Bio-Environment Control
    • /
    • v.23 no.1
    • /
    • pp.39-42
    • /
    • 2014
  • The objective of this study was to estimate cardinal temperatures for germination of lettuce (Lactuca sativar L.) using bilinear, parabolic, and beta distribution functions. Seeds of lettuce were germinated in a growth chamber at 7 constant temperatures: 10, 14, 16, 20, 24, 28, and $32^{\circ}C$. Four replicates of 100 seeds were placed on two layers of filter paper in a 9 cm petri-dish. Radicle emergence of 1 mm was scored as germination. The time course of germination was modeled using a logistic function. These minimum, optimum, and maximum temperatures were estimated by regression of the inverse of time to 50% germination rate against the temperature gradient. In bilinear function, minimum, optimum, and maximum temperatures were $7.9^{\circ}C$, $23.3^{\circ}C$, and $28.0^{\circ}C$, respectively. In parabolic function, minimum, optimum, and maximum temperatures were $9.7^{\circ}C$, $19.5^{\circ}C$, and $29.4^{\circ}C$, respectively. In beta distribution function, minimum, optimum, and maximum temperatures were $3.7^{\circ}C$, $20.7^{\circ}C$ and $32.0^{\circ}C$, respectively. Minimum, optimum, and maximum ranges of temperatures were $3.7{\sim}9.7^{\circ}C$, $19.5{\sim}23.3^{\circ}C$, and $28.0{\sim}32.0^{\circ}C$, respectively.

Optimization to Control Buckling Temperature and Mode Shape through Continuous Thickness Variation of Composite Material (복합소재의 연속 두께 변화를 통한 좌굴온도 및 모드형상 최적화)

  • Lee, Kang Kuk;Lee, Hoo Min;Yoon, Gil Ho
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.34 no.6
    • /
    • pp.347-353
    • /
    • 2021
  • In this study, we presented a novel size optimization framework to control the linear buckling temperature and several buckling modes of plates, by optimizing thickness values of composite structures for practical engineering applications. Predicting the buckling temperature and mode shape of structures is a vital research topic in engineering to achieve structural stability. However, optimizing designs of engineering structures through engineering intuition is challenging. To address this limitation, we proposed a method that combines finite element simulation and size optimization. Based on the idea that the structural buckling temperature and mode shape of a plate are affected by the thickness of the structure, the thickness values of the nodes of the target structure were set as the design variables in this optimization method; and the buckling temperature values, and buckling mode shapes were set as the objective functions. This size optimization method enabled the determination of optimal thickness distributions, to induce the desired buckling temperature values and mode shapes. The validity of the proposed method was verified in terms of their buckling temperature values and buckling mode shapes, using several numerical examples of rectangular composite structures.