• Water for future
• /
• v.28 no.1
• /
• pp.153-168
• /
• 1995

The purpose of this study is to develop an efficient model for the least cost design of multisite detention systems. The IDP (Incremental Dynamic Programming) model for optimal design is composed of two sub-models: hydrologic - hydraulic model and optimization model. The objective function of IDP is the sum of costs; acquisition cost of the land, construction cost of detention basin and pumping system. Model inputs include channel characteristics, hydrologic paramenters, design storm, and cost function. The model is applied to the Jung- Rang Cheon basin in Seoul, a watershed with detention basins in multiple branching channels. The application results show that the detention system can be designed reasonably for various conditions and the model can be applied to multi-site detention system design.

• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.306-316
• /
• 2002

ln this paper, flowfields inside the various rooms have been investigated. A storage room, a liv-ingroom with a kitchen in an apartment, and a hospital room are considered in the present calculations. In all cases, it was found that the average of air change rate is. similar to that of perfect mixing assumption and the location of air purifier has little effects on the average air change rate. Detailed local air concentrations show that there are regions where air is not quite purified because of non-uniform circulation of air flow. The location of air purifier has great effects on this behavior.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2003

Excitation and system identification are carried out for a full-scale five-story structure to obtain fundamental data which will be used for the design of viscoelastic dampers, The hybrid mass driver(HMD) installed on the fifth floor was employed as external exciter to provide excitation for the building, Each floor response was measured and processed to find out where and how the viscoelastic dampers are located and designed. The sine-sweep and white noise loadings were applied to the structure by the HMD to obtain dynamic characteristics such as natural frequencies, damping ratios, and modes, The identified building was experimentally investigated again with the designed viscoelastic dampers installed at inter-stories to obtain the response behavior in the companion paper.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.6
• /
• pp.19-27
• /
• 2004

Since the first construction of soil nailing in France in 1972, the application of soil nailing has increased. However, there is currently no design method which is universally accepted or agreed upon far soil nailed wall, because each of the design methods has different assumptions and, therefore, different approaches, moreover, since the suggested optimal inclination angles of nails are different by researchers. Therefore, the effect of nail inclination with soil nailing is analyzed by FEM. In this study, Finite element program SOILSTRUCT was applied for the effect analysis of nail inclination in soil nailed wall. For this finite element analysis, CEBTP No. 1 project data were used. The analyzed nail inclination ranged from 0$^{\circ}$ to 30$^{\circ}$ with 5$^{\circ}$ intervals. The result of finite element analysis showed that the most optimal inclination was 20$^{\circ}$ Also, the tension farce in the nails increased as the nail inclination increased. However, the effect of nail inclination on the wall deformation was very little. Therefore, constructability seems to be more important than nail inclination. Also, the tension force in the nails increases as the nail depth below the top of the wall increases, except f3r the lowest nail. Therefore, appropriate nail diameter should be used to prevent breakage of nails with considering nail strength-deformation interaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.36-41
• /
• 2016

In this study, numerical analyses were used to investigate the performance of a coupling control method for the dynamic responses of adjacent buildings under multiple hazards. Numerical simulations were done using the earthquake loads of regions with strong seismicity in Los Angeles, California, and the wind loads in regions with strong winds in Charleston, North Carolina. The artificial earthquake and wind loads were made using SIMQKE and Kaimal Spectrum based on ASCE 7-10. Ten-story and twenty-story adjacent buildings were selected as example structures, and nonlinear hysteretic dampers were used to connect them. The Bouc-Wen model was used to model the nonlinear hysteretic dampers. The results show that the proposed control method could effectively reduce the dynamic responses, and the optimal control designs were different for each hazard.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.4
• /
• pp.37-45
• /
• 2002

In this study, to measure the density and moisture of compaction, it is designed to use the 2 neutron and 5 gamma-ray detectors. Also, it can be know that Co-60 gamma-ray and Cf-252 neutron source are more useful for this system, because discharge of radiation are better than other sources. They are more profitable to improve their accuracy. Especially, to remove the interference of their reciprocal action between neutron and gamma-ray detectors it is designed shield materials with lead between 2 neutron and 5 gamma-ray detectors each other. It is performed the optimal design to shield under the suggested values completely. Because this system will use portable, so decrease of their weight are so important. For this reason, it can be decrease their weight of 5.2[kg] with shield material between each detectors and it can be think mote easy to carry and use on the industrial Spot.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.183-186
• /
• 2007

Faster, safer and cheaper mailing of the postal matter is essential for surviving in the competitive market of home-delivery service. The Steiner tree connects points minimally in geometrical way and has been used in the distribution system optimization and optimal routing of the transmission lines of the electric power system. This paper proposes a method to select the optimal location of mail distribution center that minimally connect the local mail center of some major cities using the Steiner tree theorem.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.351-355
• /
• 1999

서비스 반경이 1이내인 마이크로셀 방식은 기지국의 송신출력을 가능한 작게 하고 안테나의 위치를 주변 건물의 높이보다 낮게 설치하기 때문에 셀 반경내에 있는 지형과 구조물들은 전파특성에 매우 큰 영향을 주므로 셀 내 지형지물의 특성에 따라 기지국의 최적 출력을 구할 수 있는 전파예측 모델이 필요하다. 본 연구에서는 이동국이 가시거리 영역의 전파 음영지역 또는 가시거리 영역과 일정 경사각으로 기울어져 있는 비가시거리 영역에 위치한 경우로 구분하고, 기지국으로부터 송신된 신호가 이동국까지 일정 직진경로를 전파하는 동안, 전파의 반사첫수와 전파경로를 계산할 수있는 연산처리 알고리즘을 개발하여, 이를 웅용하므로써 임의 지점에 위치한 이동국에 도래하는 수신전력을 예측할수 있는 모델을 제안한다. 그리고, 마이크로셀 이동통신 전파환경에서 개발 알고리즘과 제안 전파예측 모델을 시뮬레이션하여, 그 결과를 분석함으로써 마이크로셀 기지국의 최적 위치선정 조건과 기지국 출력에 따른 가입자 서비스 조건을 제시한다.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.84-89
• /
• 2009

In this study, the fire extinguishing experiment was performed using a water mist nozzle with variation of factors which affect on the extinguishing time. The variables were distance from nozzle center to fire location, droplet size, height of nozzle and opening or not. With the experimental data, interaction and sensitivity between factors were analysed with Mini tab and deduce a optimum model of fire extinguishing of water mist system. Based on the experiment and modeling of fire extinguishing with water mist system, the most important factor on extinguishing time is the distance from the center of nozzle to fire and the opening effect was small compare with other factors.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.389-391
• /
• 2013

실내공간에서 사용자 재실인원수를 파악하기 위한 일반적인 방법으로는 출입구의 내 외부 벽면에 인체감지용 센서를 두 개 이상 설치하여 센서 ID별로 감지되는 순서에 따라 사용자의 입 퇴실 상황을 판별하는 것이다. 기존에 사용되고 있는 대부분의 인체 감지용 센서시스템은 동일한 종류의 센서를 조합한 형태로서 각 센서의 종류에 따른 동작방식 및 하드웨어적 특징에 따라 빛이나 온도 등의 주변 환경 요소와 장애물 등에 의해 오작동하는 문제점을 가지고 있다. 이에 본 논문에서는 적외선, 초음파, 마이크로웨이브 등 세 가지 인체감지용 센서를 다양하게 조합할 수 있는 하이브리드 센서 모듈을 이용하여 사용자의 입 퇴실 상황과 공간 내 재실인원수를 정확하게 인식하기 위한 최적의 센서 조합을 파악한다. 실험 결과, 내부/외부 모두 적외선 센서 또는 마이크로웨이브 센서를 조합하거나 내부/외부에 적외선 및 마이크로웨이브 센서를 조합한 시스템이 타 센서를 조합한 시스템에 비해 우수한 성능을 보였다.