• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.21-27
• /
• 2018

In this paper the laminate design parameters are researched to maximize the performance index of a composite pressure vessel. To maximize the performance index, the three design variables that the thickness of each of helical and hoop layers and the length of hoop layer are considered under the assumption of fixed internal space. To optimize the variables, the response surface method is introduced for construction of the surrogate model and the ANOVA(analysis of variance) is performed to evaluate the effects of the variables. The optimization problem is formulated to maximize performance index under the burst pressure constraint. To verify the effectiveness of the research, numerical analyses are performed for the optimum model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1327-1334
• /
• 2012

This study shows the conformance-based design results of a fourth-order dynamic actuator showing a performance variation caused by variation in the components as well as aero-induced disturbances. The actuator comprises a BLDC motor, spur gear and worm gear assembly, and canard. The actuator performance was evaluated by using time-variant angle information of the canard. Based on the response surface models, critical system variables were screened using F-tests, and then, the performance was approximated as a function of the variables because it is difficult to determine the performance of a high-order dynamic system as a function of system variables through analytical approaches. In this study, the conformance of uncertain performance to the specification was defined as a probability measure. The design variables obtained by optimizing the measure can provide actuator performance conforming to the specifications considered, even though there is a variation in both the components and the aero-induced disturbances.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.581-593
• /
• 2011

The underlying advantages of using thin-walled corrugatedwebs instead of plate girders with stiffeners are the elimination of instability problems associated with buckling of the thin-walled flat plate, and elimination of the need for transverse stiffeners, which alsoresults in economic advantages. This paper focuses on two aspects related to the structural design technique forsinusoidal corrugated web steel beams, and the optimum design of the beams using real-value genetic algorithms. The structural design process and design variables used in this optimization werecomposed with EN 1993-1-5, DASt-R015 standard and Pasternak et al. (2004), and the valid design capacity of shear buckling of the standards were compared. For the optimum structural design, the objective function, presented as the fullweight of the sinusoidal corrugated web beams, and the slenderness, member forces, and maximum deflection of the beam, were considered constraints. Finally, the simple beam under the uniform load was adopted as a numerical example, and the effective probability parameters of the genetic operators were considered to find the global minimum point.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.117-126
• /
• 2006

Although the Java bytecode has numerous advantages, there are also shortcomings such as slow execution speed and difficulty in analysis. In order to overcome such disadvantages, bytecode analysis and optimization must be performed. First control flow of the bytecode should be analyzed, after which information is required regarding where the variables are defined and used to conduct data flow analysis and optimization. There may be cases where variables with an identical name contain different values at a different location during the execution according to the value assigned to a variable in each location. Therefore, in order to statically determine the value and type, the variables must be separated according to allocation. In order to do so, the variables can be expressed using a static single assignment form. After the transformation into a static single assignment form, the type information of each node expressed by each variable and expression must be configured to perform static analysis and optimization. Based on the basic type information, this paper proposes a method for finding related equivalent nodes, setting the nodes with strongly connection components and efficiently assigning each node the type.

• Journal of Korea Water Resources Association
• /
• v.53 no.5
• /
• pp.383-393
• /
• 2020

The main objective of this study is to provide a robust model for estimating parameters of the Clark unit hydrograph (UH) using the observed rainfall-runoff data in the Soyangang dam basin. In general, HEC-1 and HEC-HMS models, developed by the Hydrologic Engineering Center, have been widely used to optimize the parameters in Korea. However, these models are heavily reliant on the objective function and sample size during the optimization process. Moreover, the optimization process is carried out on the basis of single rainfall-runoff data, and the process is repeated for other events. Their averaged values over different parameter sets are usually used for practical purposes, leading to difficulties in the accurate simulation of discharge. In this sense, this paper proposed a hierarchical Bayesian model for estimating parameters of the Clark UH model. The proposed model clearly showed better performance in terms of Bayesian inference criterion (BIC). Furthermore, the result of this study reveals that the proposed model can also be applied to different hydrologic fields such as dam design and design flood estimation, including parameter estimation for the probable maximum flood (PMF).

• The Korean Journal of Rheology
• /
• v.9 no.2
• /
• pp.66-72
• /
• 1997

사출성형품의 품질특성으로 외관, 치수, 기계적 강도 등이 있으나 조립부품으로써 사 될경우에는 치수가 주요한 품질이 된다. 성형품은 용융수지의 특성상 사출공정 중 수축을 일으키므로 이를 고려해서 금형설계가 이루어지지만 실제 사출과정에서 공정변수를 최적화 하여 관리하지 않으면 허용오차 내의 치수를 얻기가 힘들다. 본 논문에서는 주요조립부의 치수가 허용오차 내에서 얻어지도록 설계시 적용된 수축률과 측정된 수축률의 차이를 목적 함수로 하여 최소화 시키며 반복이차계획 알고리즘을 채택한 IDESIGN 프로그램을 이용해 최적 사출성형조건을 구하였다. 제약조건은 성형품의 부위별 수축률 편차 및 싱크마크 깊이 가 공정변수의 부등호 제약식으로 도출되었고 성형이 이루어지는 공정변수의 상하한 값이 최대 및 최소 경계값으로 적용되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.610-613
• /
• 2005

국가 수자원계획을 위해 필요한 방대한 자료 중 하나인 강수에 의한 각 유역별 유출량 산정은 매우 중요한 요소이다. 과거 수자원계획에서는 비유량법을 사용하여 각 유역의 유출량을 산정하여 왔다. 하지만 갈수기, 홍수기에 많은 불확실성이 내재되어 있음이 많은 연구에 의해 보고되어지고 있다. 본 연구에서는 표준 4단 탱크모형의 이후에 만들어진 토양수분 저류구조를 가진 탱크모형을 사용하고 개념적 융설모형을 사용하여 전국의 자연 유출량을 산정하고자 한다. 연구에 사용한 소유역단위는 수자원단위지도의 중권역 117개이다. 매개변수의 추정에 사용된 지점은 다목적댐, 용수전용댐, 신뢰성 있는 수위관측소 상류유역 등 총 24개 지점이며, 매개변수 추정에 사용한 최적화 방법은 신뢰성이 검증된 SCE-UA 전역최적화 방법을 사용하였다. 이와 같이 추정된 매개변수를 사용하여 각 권역별 연평균 유출량을 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1188-1192
• /
• 2004

본 연구는 그동안 우리나라 강우-유출분석에 주로 이용되어 왔던 Clark 단위도를 선택하여 그 매개변수와 유역반응과의 관계를 고찰하였다. 대상유역으로 국제수문개발계획 시험유역 하나인 위천유역과 남강, 주암댐을 대상유역으로 선정하여, 실측강우-유출자료에 근거하여 최적화된 단위도를 유도한 후, Clark 단위도의 집중시간(Tc)과 저류상수(K)를 산정하였다. 본 연구를 수행한 결과, 유역에서의 각 홍수사상별 첨두홍수량에 대한 Clark 단위도의 매개변수인 집중시간, 저류상수와 유역반응과의 관계를 규명할 수 있었다. 집중 시간과 저류상수는 모두 작은 홍수사상에서는 지수적으로 감소하지만 어느 홍수량 크기 이상부터는 거의 일정한 집중시간을 가짐을 알 수 있었다. 이는 큰 홍수사상에서는 유역의 선형성을 재현하고 있음을 보여주는 것이다. 또한, 이를 통해 우리나라에서 홍수량 산정시에 사용되어 오고 있는 대표단위도 개념은 큰 홍수사상에 적용될 경우에는 과소한 홍수량을 산정하므로 새로운 개념의 단위도 적용이 필요하다고 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1280-1284
• /
• 2004

본 논문에서는 월 댐유입량을 예측하는데 있어서 뉴로-퍼지 시스템의 적용성을 검토하였다. 뉴로-퍼지 알고리즘으로 퍼지이론과 신경망이론의 결합형태인 ANFIS(Adaptive Neuro-Fuzzy Inference System)를 이용하여 모형을 구성하였다. ANFIS의 공간분야에 의한 제어규칙의 선정에 있어 퍼지변수가 증가함에 따라 제어규칙이 기하급수적으로 증가하는 단점을 해결하기 위해 퍼지 클러스터링(Fuzzy flustering)방법 중 하나인 차감 클러스터링(Subtractive Clustering)을 사용하였다. 또한 본 연구에서는 기후인자들을 인력으로 하여 모형을 구성하였으며 각각 학습기간과 검정기간으로 나누어 학습기간에는 모형의 매개변수 최적화를, 검정기간에는 최적화된 모형의 매개변수를 검정하는 순으로 연구를 수행하였다. 예측 길과, ANFIS는 댐유입량 예측시 입력자료의 종류가 많아질수록 예측능력 더욱 정확한 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.55-68
• /
• 1991

In this study, Mixed coordination method was selected to optimize the shape of the truss structures which takes multi-loading condition, allowable stress, buckling stress, displacement constraints into consideration. The structure was devided into substructures by Goal coordination method and the substructures were optimized by model coordination method which used two-level technique. Therefore the number of design variables and constrints can be decreased considerable. Under the condition of the same disign, the weight of truss structures can be decreased more considerable by means of optimizing even the shape of truss than by means of optimizing the section of truss while fixing geometrical configuration of it, even though there might be a little difference according to the early geomatrical shape of the truss and the design condition. Thus, the shape optimization of truss structures which utilize the results of this study can be helpful to the economical design of truss structures.