• The Korean Journal of Mycology
• /
• v.26 no.3 s.86
• /
• pp.380-386
• /
• 1998

To obtain basic data for mass production of Isaria japonica, cultural characteristics of japonica were investigated by using liquid, solid media and silkworms pupa. Mycelia grew favorably at the temperature of $23{\sim}28^{\circ}C$ on MYG medium with pH 7.0. The fruiting-body of I. japonica was induced below $20^{\circ}C$ in MYG liquid medium (Malt yeast glucose) under fluorescent light. In MYG basal medium mixed with pupal powder of silkworms, the fresh weight of fruiting-bodies was increased with increasing concentration of pupal powder. The highest yield of fruiting bodies was obtained in carbon-rich medium supplemented with pupal powder of silkworm. Also, fruiting-bodies of I. japonica were produced massively on the silkworm pupa placed on the stainless tray in the shortest time. The structure and shape of fruiting-bodies were coral-like, many-branched types with numerous conidiospores.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.37-43
• /
• 2019

This research studied production of lightweight filling production for sink hole restoration utilizing various industrial by-products(2kinds of fly ash, petro-cokes CFBC ash, blast furnace slag fine particle). For this purpose, the mixed raw material properties(compressive strength) behaviors according to the blending ratio of industrial by-products were examined by applying the experimental design method and statistical analysis was performed using the commercial program MINITAB. Compressive strengths of industrial by-products were strongly dependent on blast furnace slag powder. Compressive strength(3days aging) was 3~11MPa depending on the amount of blast furnace slag powder used. The use of CFBC fly ash was evaluated to have the least effect on compressive strength. In addition, the compressive strength and the coefficient of permeability were measured by preparing foamed concrete for the experimental batch 1 condition in the mixture experimental design. In this case, the bulk density is 0.9 to 1.0, the apparent porosity is 30 to 50%, the compressive strength(3days old) is 1 to 2MPa, and the permeability coefficient is $10^{-2}$ to $10^{-3}cm/sec$.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.75-85
• /
• 2012

This study was investigated to develop an alternative medium for the cultivation of oyster mushrooms. The cultivation characteristics for major cultivated varieties of oyster mushrooms were campared with the food waste medium. In addition, water control & a gap formation of food waste is being pointed out as a problem of the medium material. Therefore, certain amounts of earthworm casting were supplied to the food waste medium to overcome the water and compaction phenomenon. This study investigated the use of the total 6 cultivars of oyster mushrooms, the Suhan(PL.1), Chiak No. 5(PL.2), Chiak No. 7(PL.3), Samgu No. 5(PL.4), Samgu No. 8(PL.5), Jangan No. 5(PL.6). In terms of medium, the optimum growth of the mycelium of the oyster mushroom was observed in the beet pulp medium but in food waste, the mycelium's growth was observed as insufficient in the bulk of cultivars. The Jangan No. 5(PL.6) was superior to other cultivars relative to the mycelium's growth. The optimum concentration of earthworm casting added the foodwaste medium was 30%. When Jangan No. 5(PL.6) was incubated in the foodwaste meidum containing 30% earthworm casting, the early days to germination were long, almost double the amount of time than that of the beet pulp medium. However, it was found that the fruit body size was larger than that of the beet pulp by up to 20.5%, and the length of the fruit body was up to 6.2% longer than that of the beet plup. The total yields increased by 60.5%. The analysis results of the oyster mushroom's nutritional contents cultured using the food waste medium, shows that the protein, vitamin A and vitamin E increased 70.6%, 2.4%, 0.8% respectively, the fat decreased by 12.6% and the oleic acid increased in a very small amount compared to that of the beet pulp medium.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.893-899
• /
• 2004

Method for sample preparation and quantitative analysis of 19 permitted and non-permitted synthetic colors in foods was developed based on reversed-phase ion-pairing high performance liquid chromatography. For color extraction of samples, deionized water was added, and pH was appropriately adjusted with 1% ammonia water. Any undissolved matters were extracted with 50% ethanol or 70% methanol. Lipid in snacks was first removed using n-hexane with centrifugation, water was added to extract colors, followed by clean-up and concentration using Sep-Pak $C_{18}$ cartridge. Recovery efficiencies at known concentrations of 19 standard food colors spiked into foods were in 90.3-97.9% range far soft drink, 79.2-101.9% for candy, 84.1-103.4% for jelly, 86.4-100.8% for chewing gum, 83.5-103.4% for ice cream, and 78.5-95.6% for snack.