• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.85-85
• /
• 2015

현재 태양광에너지 시장은 해마다 빠른 속도로 성장하는 추세이며 50 GWp/년 이상의 시장으로 변화하였고 앞으로도 전체적인 성장세는 지속 유지될 것으로 판단된다. 하지만 이와 아울러 각 Value chain 별로 많은 기업들이 생겨나게되어 각각의 기업들이 제품을 고효율 저가화 함으로서 경쟁력을 확보하기 위해 많은 노력들이 기울이고 있으며 본 강연에서는 이러한 측면에서 태양광 에너지의 분야별 고효율/저가화를 위한 기술동향을 살펴보고자 한다. 태양광 산업은 아직은 다소 높은 발전단가로 인해 일부 정부의 지원이나 정책에 의해 산업의 규모가 결정되게 되는데 주요한 지원제도는 RPS 제도와 FIT 제도가 있으며 우리나라는 초기 FIT 제도로 국가에서 태양광에서 생산된 전기를 높은 가격에 사주었으나 근래에들어 RPS 제도를 운영하게 되었으며 매전을 하면서 SMP에 준하는 수익을 창출하고 이와 아울러 REC 를 확보하여 확보된 REC 단가에 의해 추가적인 수익을 창출하는 구조의 발전사업이 진행되고 있다. 그리고 RPS나 FIT와 같은 정부의 지원없이도 발전단가의 경쟁력을 확보하는 시점을 그리드패러티라고 하며 이는 매우 중요한 의미를 갖는다. 태양광의 저가화는 그리드패러티 달성을 확보하기 위해 필수적으로 필요한 사안이며 앞으로도 이러한 저가화 / 고효율화 기술노력은 계속 진행될 것으로 판단된다. 우선 소재의 가격을 줄이기 위해 웨이퍼의 두께가 점점 박형화 되어가고 박형화 되면서도 안정적인 공정수율 및 효율을 향상시키기 위한 기술개발이 진행되고 있으며 Cell 분야에 있어서도 고효율을 위한 다양한 Texturing 기술 및 패시베이션 기술의 개발이 이루어 지고 있으며 고효율 컨셉의 MRT cell, Back contact cell 등 고효율 구조의 cell의 양산을 진행하고 있는 등 최근 n-type 기반의 고효율 cell 기술이 활발하게 양산화 검토가 이루어 지고 있다. 모듈 분야에 있어서는 저가/고효율화와 아울러 제품의 신뢰성 확보가 무엇보다도 중요하게 다루어 지고 있으며 이는 모듈이 최소 25년 이상 Field 에서 운용되어 수익창출이 가능해야 하므로 가장 중요한 요소중에 하나라고 할 수 있다. 신뢰성 측면에서 중요하게 다루어 지고 있는 것 중 하나가 PID 저감을 위한 노력이며 이와 관련된 각 소재의 개발이 가장 활발하게 진행되고 있으며 이와 아울러 장수명을 보장하기 위한 내구성이 겸비된 봉지재의 개발 또한 많은 관심을 불러 일으키고 있다. 저가/고효율화를 위해 CTM loss를 줄이기 위한 다양한 시도가 이루어지고 있으며 특수 형태의 리본으로 빛의 흡수를 증가시키거나 컨택저항을 최소화 하기위한 소재의 개발이 이루어 지고 있다. 태양광 시스템 분야의 경우 발전량과 수익창출에 있어 직접적인 영향을 미치는 분야로서 전체 시스템의 loss 를 줄이고 최적의 환경에서 최대한의 발전량을 확보하기 위한 array 설계 및 운용기술이 활발하게 개발되고 있으며 시스템에서의 loss를 줄여줄수 있는 마이크로 인버터나 multi string 인버터의 적용도 이루어 지고 있으나 저가화를 위한 추가적인 노력이 필요한 상황이다. 본 강연의 마지막으로 이러한 노력들의 산물인 특수 태양광 제품 및 시스템의 기술동향에 대해 살펴하고자 한다. 사막은 전체면적의 1/3을 차지할 정도로 넓은 면적을 자랑하지만 밤과 낮의 기온차 그리고 계통 선로의 부재 등 적용하기 어려운 환경적인 제약도 함께 존재하며 이러한 문제를 해결하기 위한 방안에 대해 살펴보고 최근 Hot issue 중의 하나인 수상 태양광 시스템의 장, 단점과 기술적 특성 등을 살펴보고자 한다.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2015

In this study, the causes and countermeasures for the leakage of a sea dyke under construction are analyzed. In general, the seabed ground is clearly divided from the embankment but a lot of parts show abnormal zones with low resistivity from the results of electric resistivity survey. Hence the causes of the leakage are considered as following: three-dimensional shear strain behavior, irregular compulsory replacement of the soft seabed ground with low strength and quality deterioration of the waterproof sheets during the closing process. The improvement method is determined by considering the constructability in the seawater and its velocity condition, durability, economic feasibility, similar application cases and so on. Consequently, a combination of low slump mortar and slurry grouting and injection method is selected as an optimum combination. Mixing ratio and improvement pattern are determined after drilling investigation and pilot test. The improvement boundary is separated into general and intense leakage area. The construction is performed with each pattern and the improvement effects are confirmed. The confirmed effects with various tests after completion show tolerable ranges for all of the established standards. Finally, various issues such as prediction of length of the waterproof sheet, installation of it against seawater velocity, etc. should be considered when sea dykes are designed or executed around the western sea which has high tide difference.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.334-339
• /
• 2008

Construction that over 70% of the structure consists of concrete gets bigger and higher gradually and the demand of that is increasing as well. However, it's not easy to supply young and skilled persons on construction site because of social avoidance phenomena about 3D occupation, so it causes serious problems like aging and shortage of technicians. To solve the problems, executives related to the construction field make a management effort in various ways such as construction period shortening, labor productivity improvement and good quality but recently, they have an increasing interest in the necessity of the modularization of the high-rise building and the automation of the engineering development for the strengthening of international competitive power as more active and long-term alternatives. Therefore, this study is to propose the roadmap in order to make lots of efforts in developing construction technologies of high-rise buildings by performing a foundation study, the strategy for 4-step research development, on modularized construction system of concrete structure of high-rise buildings through domestic and foreign preceding research analyses associated with optimal design modularization technique, module factory automation and assembly automation of modularized objects.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.17-22
• /
• 1991

최근 기계장치로부터 발생하는 소음을 감소시키는 새로운 방법으로서, 능동 적으로 소음을 제어하는 방법에 대한 연구가 활발히 진행되고 있다. 이것은 원하지 않는 소음을 그 신호의 역위상을 갖는 부가음을 이용하여 능동적으 로 감쇠시키는 방법으로서, 저주파수 대역에서 비효율적인 수동적인 방법인 소음기둥에 대한 대안으로 많은 학자들의 관심의 대상이 되어 왔다. 초기에 는 소음을 줄이기 위해 요구되는 여러가지 음향요소의 전달함수를 제어하는 데 대한 불가능성으로 인해 능동 소음제어에 대한 실질적인 발전이 지연되 어 왔으나 최근 마이크로 컴퓨터를 비롯한 전자공학의 발전으로 인해 적응 신호처리 분야가 등장하게 되었으며, 음향계의 소음을 원하는 수준까지 제어 하는 능동 소음제어의 실시간 구현이 가능하게 되었다. 그 중에서도 음이 1 차원적으로 전파한다고 볼 수 있는 길이가 긴 덕트구조물에서의 능동 소음 제어는 가장 기본적이며 현실적으로 자동차 배기계나 냉동.공조설비에 있어 서 실용적으로 적용할 수 있는 문제임 만큼 많은 연구가 이루어지고 있다. 이러한 능동 소음제어 방법을 음향계에 적용하였을 때, 부가적인 음을 발생 하는 제어용 스피커로 인해 입력마이크로폰으로의 음향궤환이 존재하고 이 에 따라 제어계가 불안정해질 수 있으며, 또한 변환기의 사용으로 인한 부가 적인 전달함수가 존재하므로 이에 대한 중요한 의미를 갖고 고려하여야 한 다. 본 연구에서는 적응 필터링 이론에 의한 소음원의 입력신호에 대한 최적 한 예측으로써 부가음을 발생시키고, 입력신호 및 제어된 출력신호간의 차인 오차를 최소화 시키도록 하는 오차적응제어법을 이용한 능동소음 제어 방법 을 제시하였다. 이와 아울러 제어계의 환경변화에 따른 파라메타의 변화에 적응적으로 응답이 가능해야 하는 적응 소음제어 시스템에서, 음향궤환과 함 께 필히 고려해야 하는 부가적인 전달함수의 영향을 고려한 능동 소음제어 에 대해 연구하였다. 경량화 추세에 따라 지반이나 케이싱이 경량이거나 유연하여 회전축과 동적으로 연성된 경우 회전축-베어링-지반으로 이루어진 2중구조의 회전축 계 동특성을 해석할 수 있는 프로그램을 개발하므로서 회전 기계류의 진동 전반에 걸친 문제점에 대한 그 원인과 현상을 명확히 분석하여 국내의 전기 계류의 보다 신뢰성있는 설계 및 제작자료를 확보하는데 기여할 수 있게 하 였다.존의 small molecular Gd-chelate에 비해 매우 큼을 알 수 있었다. MnPC는 간세포에 흡수된 후 담도계로 배출되는 간특이성 조영제임을 확인하였다. 장비 내에서 반복 시행한 평균값의 차이는 대체적으로 유의한 차이가 없었으나, 다른 장비에서 반복 시행한 장비간의 사이에는 유의한 차이가 있는 경우가 더 많았다. 따라서 , MRS 검사를 소뇌나 뇌교의 어떤 절환에 적용하기 전에 각 장비 마다 정상 기준치를 반드시 얻은 후에 이상여부를 판 정하는 것이 필수적이라고 생각된다.EX> 이상이 적절한 진단기준으로 생각되었다. $0.4{\;}\textrm{cm}^3$ 이상의 좌우 부피차를 보이는 모든 증례에서 육안적으로도 해마위축이 뚜렷이 나타났다. 결론 : MR영상을 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection fie이 and the maximum relaxivity value. The results shows a fluences on both inflection field

• Journal of Korea Water Resources Association
• /
• v.42 no.6
• /
• pp.505-511
• /
• 2009

When replacing deteriorated pipes, it is important to select pipe diameters of new pipes for improving the long-term reliability of a water distribution system. However, as the use of larger diameter pipes brings cost increase, it is required to evaluate the improvement of the reliability by the use of larger diameter pipes. In this study, we propose a methodology to evaluate the improvement of the reliability by the use of different pipe diameters. For this purpose, we rely on the segment-based minimum cutset method with the success mode approach to evaluate the reliability of a water distribution system and determine which pipes and their diameters will be replaced to improve the reliability using GA, After the suggested method is applied to a real water distribution system, the optimized pipe diameters produces higher reliability of the system than the current ones with the same construction cost. However, compared to the increase rate of the construction cost, the improvement of the reliability is not significant. Thus, in addition to the use the different pipe diameters, the structural modification or adding new valves to the system is necessary to improve the reliability efficiently.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.521-528
• /
• 2008

Such conventional maritime communication technologies as radio have short some comings in their transmission quality. It can be overcome by wireless channels provided by satellites such as INMARSAT, which nevertheless suffer from the high costs. In this paper, we propose a novel technology resolving the above problems, featuring in the establishment of maritime communication networks with multi-hop structures. The inter vessel and ship-to- shore networks previously modeled after MANET are remodeled by SANET (Ship Ad Hoc Networks) in the present work. Fan-shaped Search Zone Routing (FSR) protocol also is presented, which utilizes not only static geographical information including the locations of ports and the navigations of courses but also the unique characteristics of ships in terms of mobile nodes. The FSR finds the fan-shaped search zone on which the shortest path is located. The performance of LAR protocol is compared with that of FSR in several ways. First, FSR does not make use of a type of control packets as beaconing data, resulting in a full utilization of the bandwidth of the wireless channels. Second, the delivery rate by the FSR is 100% for the fan-shaped search zone includes at least one route between source and destination nodes on its border line, where as that of LAR has been turned out to be 64%. Third, the optimality of routes searched by the FSR is on a 97% level. Of all, the FSR shows a better performance than LAR by about 50%.

• Journal of Technology Innovation
• /
• v.24 no.4
• /
• pp.27-53
• /
• 2016

This case analyzed the efficiency of 79 R&D projects performed within one private research center in machine tools industry. DEA was used for efficiency analysis. Input variables were R&D investment expense and man-month. Output variables were achievement rate on target development period and expected net sales within 5-years. Samples are divided into product development, Prior technology development, and control technology development. The key result is that Prior technology showed the lowest efficiency because of high uncertainty. It was so difficult to determine its goals and to make its specific plans. With respect to scale, the proportions of CRS(constant returns to scale) were 34.6%, 14.3% and 38.9% for product development, prior technology, control technology respectively. As for IRS(increase returns to scale), they were 53.8%, 85.7% and 38.9% for product development, prior technology, control technology respectively. As for DRS(decrease returns to scale) they were 11.5%, 0% and 22.2% for product development, prior technology, control technology respectively. On the whole, in this case, insufficient input was more problematic than excessive input, which means the lack of investment in R&D. Prior technology can be the source of the future competitiveness of companies. To operate inefficient DMU efficiently, the optimal input should be managed and it is derived from comparison with the reference group.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.551-562
• /
• 1998

Amultiresolution filtering algorithm based on the physical SPECT lesion detachability provides and optimal solution for SPECT reconstruction problem. Related to the previous study, we estimated the SPECT lesion detection capability by m minimum detectable lesion sizes (MDLSs), and generated m reconstruction filters which are designed to maximize the smoothing effect at a fixed MDLS-dependent resolution level $\frac{MDLS}{4\sqrt{2In2}}$. The proposed multiresolution filtering algorithm used a coarse-to-fine approach for the m-level resolution filter images obtained from these m filters for a given projection image. First, the local homogeneity is determined for every pixel of the filter images, by comparing the local variance value computed in a window centered at the pixel and the mode determined from the distribution of the local variances. Based on the local homogeneity, the pixels declared as homogeneous are chosen from the filter image of the lowest resolution, and for the other pixels the same process is repeated for the higher resolution filter images. For the non-homogeneous pixels after this pixels after this repetition process ends, the pixel values of the highest resolution filter image are substituted. From the results of the simulated experiments, the proposed multiresolution filtering algorithm showed a strong smoothing effect in the homogeneous regions and a significant resolution improvement near the edge regions of the projection images, and so produced good adaptability effects in the reconstructed images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.63-71
• /
• 2018

A flower support was developed for real flower decoration automation production system using an ultrasonic wave sealer to automatically produce a system. Because a flower support for real flower decoration that was produced manually could not meet the needs of the consumers, this study developed an automated manufacturing system to increase productivity. A flower support for real flower decoration was constructed using a cap consisting of plastic and plate made from non-woven fabric. The guide was designed to transport the cap to the ultrasonic wave sealer and optimal guide was developed from the test according to the material and shape. To produce the entire system, the guides and accessories were weighed and appropriate motors and pulleys were calculated. Control of the automation production system was based on a PCB board, which increased the reliability and security, and a remote controller with manual and automatic modes was prepared. After development, tests of the transfer precision and repetition accuracy revealed an X-axis of 2.7mm, a Y-axis of 1 mm, and a repetition of 0 mm. The productivity was also checked. The automated machine worked 8 hours/day to make 35 supports and 70 Therefore, the automatic system produces 200% more output than manual work

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.156-166
• /
• 2009

Residential land development projects are tending upwards recently. However, an indiscreet residential land development has tended to damage environment by destroying existing green lands and trees of target lands and generating many cut slopes with transformation of its topography. There are Prior Environmental Review(PER) for district designation and Environmental Impact Assessment(EIA) before approval on development plans. PER is implemented after developing a residential land development plan and EIA is implemented after completing a detail design. As the result, many of residential land development projects are passive to reduce potential environmental problems on the designated sites. Object of this study is to construct an evaluation system on alternatives in the early step of site designation for implementing residential land development projects with environment-friendly and sustainable way. For this, alternative evaluation model is constructed by using Fuzzy Inference and Analytic Hierarchy Process(AHP) method based on Environmental Evaluation Factors of residential land development project, which are proposed in the precedent research. If a decision maker evaluates environment damage by ten-point method, the point is transformed Environmental Performance(EP) by Fuzzy Inference, and then, applying weight that is already calculated by AHP method, Total Environmental Performance(TEP) is calculated. After all, an alternative with the highest TEP is selected as the best one. Using this evaluation system, more than two alternatives of residential land development project site, which can hold location appropriateness in the early under undecided land use plan, can be evaluated quantitatively. As environmental damages, which can be generated by implementing a residential land development project, can be detected in the early step, environmental damages can be removed or reduced at the source.