• Journal of Korea Water Resources Association
• /
• v.38 no.6 s.155
• /
• pp.471-483
• /
• 2005

A monthly Ensemble Streamflow Prediction (ESP) system was developed by applying a daily rainfall-runoff model known as the Streamflow Synthesis and Reservoir Regulation (SSARR) model to the Han, Nakdong, and Seomjin River basins in Korea. This study first assesses the accuracy of the averaged monthly runoffs simulated by SSARR for the 3 basins and proposes some improvements. The study found that the SSARR modeling of the Han and Nakdong River basins tended to significantly underestimate the actual runoff levels and the modeling of the Seomjin River basinshowed a large error variance. However, by implementing optimal linear correction (OLC), the accuracy of the SSARR model was considerably improved in predicting averaged monthly runoffs of the Han and Nakdong River basins. This improvement was not seen in the modeling of the Seomjin River basin. In addition, the ESP system was applied to forecast probabilistic runoff forecasts one month in advance for the 3 river basins from 1998 to 2003. Considerably improvement was also achieved with OLC in probabilistic forecasting accuracy for the Han and Nakdong River basins, but not in that of the Seomjin River basin.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.69-77
• /
• 1998

Linear displacement accuracy is one of the most important factors that determine machine tool accuracy The laser interferometer has been usually recommended for the measurement of linear displacement accuracy. In this paper, microcomputer aided measurement and compensation system has been developed for the pitch error in a CNC machine tool. For accurate pitch error calculation. the analysis code for the pitch error has been also implemented according to the international standards (ISO). The PC based automatic compensation system for the pitch error is also implemented. A new algorithm for calculating optimum value for pitch error compensation is proposed, minimizing the deviation at each target points. The development system has been applied to a practical CNC maching center and the performance has been demonstrated.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.109-112
• /
• 2007

본 논문에서는 대축척 수치지도와 Quickbird 위성영상의 자동 보정을 영상공간에서 수행한다. 알고리즘은 보정변환식의 초기 계수값 결정과 정확한 변환계수 결정과정으로 나뉜다. 초기 계수값 결정은 보정변환식의 상수항을 결정하는 것으로 수치지형도의 지면개체와 영상에서 추출된 에지의 논리곱 연산을 적용하여 최적값을 추정하는 방식을 용한다. 보정 다항식의 정확한 변환계수를 결정하기 위하여 수치지형도의 지면 선형개체 점데이터와 영상의 에지개체 점데이터간 ICP 조정을 수행하였다. 제안된 방법의 정확도를 평가한 결과， 영상공간에서 1.72화소의 RMSE를 나타내었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1996-2000
• /
• 2006

현재 국내 주요 하천의 홍수예경보시스템 운영과 다목적댐의 홍수조절관리를 위하여 수문학적 모형의 하나인 저류함수모형(storage function model)을 사용하고 있다. 저류함수모형은 산지가 많은 유역에 적합하도록 개발된 모형으로, 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 실제 홍수사상에 저류함수모형을 적용하기 위해서는 적절한 매개변수의 적용이 필요하다. 현재까지 저류함수모형의 매개변수를 보정하기 위한 연구가 많이 되었지만, 실질적으로 보정된 매개변수를 실제 홍수사상에 적용함에 있어서는 많은 어려움이 존재한다. 따라서 이러한 문제점을 해결하고자 본 연구에서는 저류함수 모형 중 유역유출 매개변수를 첨두유량에 대한 상대민감도분석을 통하여 매개변수의 경계조건을 설정하고, 이 경계조건을 바탕으로 최적화기법(optimization technique)을 사용하여 과거 홍수사상에 대하여 보정을 수행하였다. 그리고 보정된 매개변수를 모의 홍수사상에 적용하기 위한 최적매개변수(optimal parameter) 결정을 위한 방법들을 제시 및 적용하여 비교 분석하였다.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.2
• /
• pp.261-268
• /
• 2004

This study to design an optimum phase implementing a 256 phase Opto-ULSI processor for multi-function capable optical networks. The design of an 8 phase processor is already in construction and will provide the Initial base for experimentation and characterisation. The challenge is to be able to compensate for the non-linearity of the liquid crystal, find an optimum phase, and implement a larger scale Opto-ULSI processor. This research is oriented around the initial development of an 8 phase Opto-ULSI processor that implements a Beam Steering (BS) Opto-ULSI processor (OUP) for integrated intelligent photonic system (IIPS), while investigating the optimal phase characteristics and developing compensation for the non-linearity of liquid crystal.

• Information and Communications Magazine
• /
• v.18 no.6
• /
• pp.46-57
• /
• 2001

본 논문은 IMT-2000 이동통신 표준인 cdma2000 환경에서 라그랑제(Lagrange)승수를 이용한 알고리즘을 이용하여 설계한 스마트안테나 시스템을 성능 분석하였다. 본 논문에 적용한 수신안테나 시스템은 기존의 2 안테나 다이버시티(2-antenna diversity) 시스템과는 달리 선형배열안테나를 이용하여 각 안테나 소자에 대한 위상보정을 통해 최적의 수신이득을 얻는 시스템이다[1]. 본 논문에서는 안테나위상의 보정을 위해 수신신호의 자기상관행렬의 최대 고유치에 해당하는 고유벡터를 계산하는 절차를 거치며 이를 위해 라그랑제승수(Laglange Multiplier)에 기초한 알고리즘을 사용하였다[2]. 이렇게 구현된 스마트안테나 시스템을 변조심볼(Mudulation Symbol)의 SER(symbol error rate)에 대한 성능분석을 통해 cdma2000 데이터채널의 수용용량을 제시함으로써 시스템의 성능을 분석하였다.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.589-594
• /
• 2010

Superimposition of horizontal and vertical curves may hamper the ride comfort and running stability of train and largely affect the maintenance costs. However, in many cases, it is not easy to make a track alignment plan because of the geographic conditions or undesirable environmental factors. In this paper, a comparative study on the effect of superimposition of vertical and horizontal curve on the ride comfort and optimum horizontal curve conditions was performed. That is, optimal cant and ride comfort analysis with and without a vertical curve superimposed on the horizontal curve were evaluated. Also the superimposition effect on ride comfort and alignment conditions in high speed zone were evaluated. From the analysis results, it was found that the ride comfort is similar to that at the only horizontal curves when applying the compensation cant for the superimposed site.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.159-179
• /
• 2006

By using the current road design method that is based on the regulation about structure and facilities standard of the road and the route plan guide of a national road and the alignment optimization road design method which is studied in the inside and outside of country, this study operate the route plan of the sample study and compare and analysis the route character, consequently the current design method has local optimization that is formed the plan by the stage and the section. Alignment optimization road design has the system optimal route search. But cost function has limite that caused by construction parameter that is not included in cost function. So we design a road route included cost function in main fields. As a result, we obtain a realistic and economically road route. The alignment optimization road design model has to be made up some problems, like the change of vertical gradient in the tunnel section, though this defects it has a lot of merits as a geometric design tool, especially in the feasibility study and the scheme design.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1773-1774
• /
• 2008

유동적 비선형 특성을 보이는 혼돈 시계열에 대한 정확한 예측을 위해 예측 입력으로 차분 데이터를 사용하면 보다 나은 예측이 가능하다. 그러므로 본 논문에서는 상관 해석에 기반한 데이터의 전처리를 통해 적절한 최적 차분 간격 후보군을 선정하고 이들 각각에 대한 TS 퍼지 예측기로 다중 모델을 구성하여 성능 지수 평가에 의해 최적의 퍼지 예측기를 선택하여 예측을 수행하도록 하였으며, TS 퍼지 규칙 후건부에서 결정되는 예측 출력에 상관 해석에 기반한 오차 보정 메거니즘을 추가함으로써 예측 성능을 더욱 향상시킬 수 있도록 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.371-378
• /
• 2003

The compression index of clay distributed in the west and south coast of the Korean Peninsula had been studied. Compression index was obtained from the conventional consolidation test, and was conducted accordingly to obtain the field virgin compression curve by means of Schmertmann's graphical correction. To examine a correlation closely between physical properties of soils($e_o$, LL, w) and compression index(Cc), linen. and non-linear regression analysis were employed based on the data collected from tests. The conclusions are as follows. The compression index obtained by means of Schmereann's graphical correction is about 1.16 times for the value of original oedometer test curve for U/D samples. Non-liner regression curve was preferable to establish a correlation equation rather than linear regression curve. All derived equations so far achieved have been summarized and given. However, linear equation is better for practical use so that part by part simplified linear equations were also suggested alternatively together with their own non-linear regression curve.