• Title/Summary/Keyword: 최저도달온도

Search Result 34, Processing Time 0.021 seconds

A Study of Amylose Content, Water Absorption and Gelatinization Characteristics of Barley Varieties. (보리품종의 Amylose함량, 수분흡수율 및 호화조건에 관한 연구)

  • Park, M.W.;Cho, C.H.;Kim, H.B.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.23 no.2
    • /
    • pp.88-98
    • /
    • 1978
  • Amylose content, water absorption and amylograph characteristics of waxy and nonwaxy barley varieties were studied. Amylose content of nonwaxy varieties ranged from 23.4% to 31. 5% and waxy varieties showed 5.4%-9.5%. Water absorption of waxy varieties was highest among the materials tested. Waxy barley showed lowest gelatinization temperature among the varieties. Gelatinization temperature was positively related with the maximum viscosity in all tested varieties. There was no relationships between amylose content and gelatinization temperature, gelatinization time and viscosity.

  • PDF

The Construction and Investigation of The 1/4 Wavelength Thermoacoustic Refrigerator (1/4파장 열음향 냉동기의 제작 및 성능시험)

  • Song, Kyu-Joe;Park, Jong-Ho;Lee, Sung-Ro;Lee, Jae-Ho
    • Proceedings of the KSME Conference
    • /
    • 2001.11b
    • /
    • pp.223-228
    • /
    • 2001
  • The thermoacoustic refrigerator has not only considerable possibility but also commercial usability, because it has high reliability, lower vibration, no moving part, and can easily be constructed. In this study, The thermoacoustic refrigerator were constructed. The apparatus is capable of driving closed systems containing He or air at mean pressures ranging from 1-9.3 bar, at frequencies ranging from 100-1000Hz. The resonance characteristics of the thermoacoustic refrigerator were investigated for better performance, The resonance tube is 340.5mm in length. In case of using air as a coolant. Freezing frequency is 174Hz, In case of using He as a coolant Freezing frequency is 625Hz. Using He, The cold-part temperature of the heat exchanger fell to $-23.7^{\circ}C$ after 120 minutes in 70W.

  • PDF

고진공하 우주열환경 모사방법 및 장치 설계

  • Lee, Sang-Hun;Jo, Chang-Rae;Lee, Dong-U;Mun, Gwi-Won
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.103.1-103.1
    • /
    • 2013
  • 위성의 발사, 천이궤도, 운영궤도 등에서 위성체에 주어지는 극한 온도와 진공상태에서 위성체와 열 제어시스템이 요구 조건을 만족시키는가를 확인하기 위하여 열진공시험을 수행한다. 열진공시험은 기본적으로 고진공 환경 하에서 심우주의 극저온 온도 모사가 가능해야 한다. 현재 산업용으로 일반적으로 사용하고 있는 냉동기의 경우는 최저 $-70^{\circ}C$ 까지 도달 가능하므로 심우주모사에 적당하지 않아, 주로 액체질소 및 기체질소를 이용한 냉각장치를 사용하고 있다. 본 논문에서는 진공하에서 심우주의 극저온 및 고온의 열환경을 모사할 수 있는 방법 및 장치의 개념 설계에 대해 알아보고자 한다.

  • PDF

Energy Saving Effects of Underground Rock Storage System for Heating of Greenhouse (자갈축열 태양열 온실의 난방에너지 절감효과)

  • 이석건;이종원;이현우;김길동
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 2001.04b
    • /
    • pp.29-30
    • /
    • 2001
  • 자연에너지원중 태양에너지를 이용한 자갈축열 태양열 온실의 난방에너지 절감효과를 분석하기 위하여 야간에 내부설정온도를 18℃로 했을 때의 자갈축열 태양열 온실과 동일한 제원의 대조온실의 난방연료소비량을 비교하였다. 자갈축열 태양열 온실의 경우 난방초기에는 연료가 대조온실에 비해 약 10%정도 더 소모되었으나 2일이 경과한 후에는 점차 난방연료소비량이 감소하였다(Fig. 2) 이러한 결과는 자갈축열 태양열 온실의 경우 주간에 온실에 투여되는 일사에 의해 축열이 이루어 질뿐만 아니라 야간에 난방을 할 경우에도 축열층의 온도가 설정온도에 도달할 때까지 축열이 이루지기 때문인 것으로 분석되었다 (Fig. 1). 3월 10일부터 3월 15일까지 6일간의 난방연료소비량이 대조온실은 167℃였으나, 자갈축열 태양열 온실은 109℃로써 대조온실에 비해 약 35%정도 난방연료 절감효과가 있는 것으로 분석되었다(Fig. 2). 6일간의 난방 후 자갈축열 태양열 온실에 난방을 중단한 결과 온실외부의 최저기온이 -2.4℃일 때 자갈축열 태양열 온실의 내부최저온도는 14℃를 유지하였으며, 이후 계속 난방을 수행하지 않은 상태에서도 주간에 축열효과로 인하여 최저외기온이 3℃전후일 때 자갈축열 태양열 온실의 내부온도는 15℃를 유지하였으나 대조온실은 5℃ 전후였다. 그리고, 일기온차가 심한 3월말에는 야간설정온도가 18℃인 경우에 자갈축열 태양열 온실의 난방연료소비량이 대조온실에 비해 월등히 적음을 알 수 있었다(Fig. 1, 2). 3월에 자갈축열 태양열 온실의 난방연료소비량은 대조온실에 비해 약 50%이상의 절감효과가 있는 것으로 나타났다./TEX>3.1cm, 2cm$\times$4.2cm 순으로 나타났다. 5. 저고리의 옆길이 곡선에 대한 평가는 진종의 중심인 겨드랑이가 5cm인 것이 가장 우수한 것으로 나타났으며, 그 다음으로 4cm, 6cm, 3cm 순으로 나타났다. 6. 이에 위의 항목들을 종합하여 제작한 연구저고리는 등길이가 28cm, 어깨선 위치는 1.75cm, 깃크기는 5cm$\times$21.5cm, 소매통 크기는 3cm$\times$4.3cm, 옆길이 곡선은 5cm로써 그 형태에 따른 신체적합성에 대한 외관 관능검사 결과로 3.83의 평균값으로 나타났고, 심미성에 대한 외관 관능검사를 항목별 평균치 값으로 종합하면 4.00의 값으로 나타났다. 또한 각 부위별 동작적합성 관능검사는 7가지 동작을 부위별 항목 평균치 결과 3.95의 유수한 저고리로 평가되었다. 본 연구 실험 결과 앞으로도 전통 저고리를 피복함에 있어 외관과 동작적합성이 좋은 저고리를 만들기 위해 지속적 연구가 요청된다. turned back than the Korean women's. Based on the above findings, a torso prototype was developed for the Chinese women by setting the body measurements in reference with their average body measurements plus minimum reserve. The reference lines were set for front/back central line, front/

  • PDF

TDS analysis of graphite divertor tiles

  • 이상균;임종연;최상철;서인용;신용현;홍승수;정광화;임기학
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.41-41
    • /
    • 1999
  • 핵융합 장치의 플라즈마 운행동안 토카막 내벽에 도달하는 온도는 최저 $600^{\circ}C$ 이상이다. 또한 플라즈마 자체와 사용자(User)들의 시료로부터 방출되는 입자들에 의한 내벽 충격(damage)은 장기간의 안정적인 운행 및 연구에 심각한 영향을 미친다. 이러한 이유로 토카막 제작시 내벽 보호재의 선정은 매우 높은 비중을 차지한다. Graphite는 높은 융점과 가공의 용이성으로 토카막 내벽의 보호재로 선호되는 물질이다. 그러나 토카막 용기(vessel)에 사용되는 스테인레스 스틸(AISI 316LN)보다 약 50배 이상의 기체 방출율(outgassing rate)을 가진다. 그러므로 장착 이전의 초기 청정화 과정이 매우 중요하며, 특히 400m2의 약 2톤(2000kg)의 graphite가 사용되므로 대량 처리를 할 수 있는 방법의 선정도 함께 개발되어야 한다. 본 연구팀에서는 처음 10개 회사의 시제품을 검토한 후, 최종 2개 회사의 4가지 종류의 시료를 선정하였다. 선정된 시료는 Union Carbide의 ATJ와 Toyo Tanso의 IG-110, IG-43, Ig-430이다. 시료는 비절삭유(oil-free) 가공에 의해 80$\times$2$\times$3 (mm)의 크기로 제작되었고 에탄올과 메탄올 용액에서 초음파 세척되었다. 건조된 시료는 TDS(Thermal Desorption Spectroscopy) 장치에 장착되어 세 단계의 실험을 하였다. 처음은 승온(상온 ~100$0^{\circ}C$)에 의한 방출 기체의 성분 분석, 두 번째는 장기간 (2주) 대기 노출 후 주요 방출 기체의 온도에 따른 변화, 마지막으로는 특정 기체에서의 장기간 보관후, 주요 방출 기체의 온도에 따른 변화를 조사하였다. 다음 그림 1은 본 연구에서 사용된 TDS 장치의 개략도이고 그림 2는 TDS 장치에 장착 직 후와 대기 중 노출된 시료들의 온도증가에 따른 총 압력의 변화이다.

  • PDF

An Experimental Study of the 2-stage Gifford-McMahon Cryorefrigerator (2단 Gifford-McMahon 극저온냉동기의 특성실험)

  • Park, S.J.;Koh, D.Y.;Yoo, C.J.;Kim, E.J.;Choi, H.O.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.5 no.3
    • /
    • pp.198-206
    • /
    • 1993
  • Experimental results of two stage Gifford-McMahon cryorefrigerator are described. In-prototype experiments, drive mechanism is Scotch Yoke type driven by stepping motor, copper meshes and lead balls are used for regenerator's materials in the first stage and the second stage, respectively. To find optimal conditions of the cryopump, no load temperature and refrigeration capacity according to the variation of cycle frequency and operating pressure are measured, and the cool down and load characteristics at particular cycle frequencies are presented. In general, as the cycle frequency is lowered, no load temperature is dropped but refrigeration capacity is diminished. As the representative result, in a case that the cycle frequency is 70rpm and steady state pressure is 14 atm, no load temperature of second stage is lowered to 10.5K in 55 minuters, and in this situation the refrigeration capacity of the first stage is 42W at 80K, that of the second stage is 11 W at 20K.

  • PDF

Effect of Drying Conditions of Steamed Egg Yolk on Acid Value of Duck Egg Yolk Oil (증자 난황 건조 조건이 오리 난황유 산가 변화에 미치는 영향)

  • 류일환;정인택;이갑상
    • The Korean Journal of Food And Nutrition
    • /
    • v.17 no.2
    • /
    • pp.206-211
    • /
    • 2004
  • It is very important to minimize the acid value of oil in the oil and fat industry, because acid value of oil products are a indicator quality. This study was performed to investigate change of moisture content, acid value and free fatty acid content by drying condition such as drying method, temperature and drying time on steamed duck egg york. Also, change of fatty acid composition by acid value. The acid values, moisture contents and free fatty acid contents were showed comparatively lower value by spray drying and freeze drying than by steam drying. but difference that keep in mind between each drying method was not looked. Whereas moisture content, acid value and free fatty acid content of effect of drying temperature reaches in lowest value. also, did not show change until dry 12hours reaching to lowest value by 3.1, 3.0% and 0.98% after dry 9hours both moisture content, acid value and free fatty acid content. Also, acid value increase, free fatty acid was increased, where unsaturated fatty acid showed that decrease rapidly.

Estimation of Soil Surface Temperature by Heat Flux in Soil (Heat flux를 이용한 토양 표면 온도 예측)

  • Hur, Seung-Oh;Kim, Won-Tae;Jung, Kang-Ho;Ha, Sang-Keon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.37 no.3
    • /
    • pp.131-135
    • /
    • 2004
  • This study was carried out for the analysis of temperature characteristics on soil surface using soil heat flux which is one of the important parameters forming soil temperature. Soil surface temperature was estimated by using the soil temperature measured at 10 cm soil depth and the soil heat flux measured by flux plate at 5 cm soil depth. There was time lag of two hours between soil temperature and soil heat flux. Temperature changes over time showed a positive correlation with soil heat flux. Soil surface temperature was estimated by the equation using variable separation method for soil surface temperature. Arithmetic mean using temperatures measured at soil surface and 10 cm depth, and soil temperature measured at 5 cm depth were compared for accuracy of the value. To validate the regression model through this comparison, F-validation was used. Usefulness of deductive regression model was admitted because intended F-value was smaller than 0.001 and the determination coefficient was 0.968. It can be concluded that the estimated surface soil temperatures obtained by variable separation method were almost equal to the measured surface soil temperature.

Outgassing and thermal desorption measurement system for parts of CRT (CRT 부품용 탈가스 및 Thermal Desorption 측정장치 개발)

  • Sin, Yong Hyeon;Hong, Seung Su;Mun, Seong Ju;Seo, Il Hwan;Jeong, Gwang Hwa
    • Journal of the Korean Vacuum Society
    • /
    • v.6 no.4
    • /
    • pp.298-307
    • /
    • 1997
  • TDS(Thermal Desorption Spectroscopy)system, for diagnosis of CRT manufacturing process, was designed and constructed. Outgassings and thermal desorptions from the part or materials of CRT can be measured and analysed with this system at various temperatures. The system is consisted of 3 parts, vacuum chamber and pumping system with variable conductance, sample heating stages & their controller, and outgassing measurement devices, like as ion gauge or quadrupole mass spectrometer. The ultimate pressure of the system was under $1{\times}10^{-7}$ Pa. With the variable conductance system, the effective pumping speed of the chamber could be controlled from sub l/s to 100 l/s. The effective pumping speed values were determined by dynamic flow measurement principle. The temperatures and ramp rate of sample were controlled by tungsten heater and PID controller up to 600℃ within ±1℃ difference to setting value. Ion gauge & QMS were calibrated for quantitative measurements. Some examples of TDS measurement data and application on the CRT process analysis were shown.

  • PDF

The Effect of Daily Minimum Temperature of the Period from Dormancy Breaking to First Bloom on Apple Phenology (휴면타파부터 개화개시까지의 일 최저온도가 사과 생물계절에 미치는 영향)

  • Kyung-Bong Namkung;Sung-Chul Yun
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.25 no.3
    • /
    • pp.208-217
    • /
    • 2023
  • Accurate estimation of dormancy breaking and first bloom dates is crucial for effective fire blight control by disease model such as Maryblyt in apple orchards. The duration from dormancy breaking to first bloom in apple trees was influenced by daily minimum temperatures during the dormant period. The purpose of this study is to investigate the relationship between minimum temperatures during this period and the time taken for flowering to commence. Webcam data from eight apple orchards, equipped by the National Institute of Horticultural and Herbal Science, were observed from 2019 to 2023 to determine the dates of starting bloom (B1). Additionally, the dormancy breaking dates for these eight sites were estimated using an apple chill day model, with a value of -100.5 DD, based on collected weather data. Two regressions were performed to analyze the relationships: the first regression between the number of days under 0℃ (X1) and the time from calculated dormancy breaking to observed first bloom (Y), resulting in Y = 0.87 × X1 + 40.76 with R2 = 0.84. The second regression examined the starting date of breaking dormancy (X2) and the duration from dormancy breaking to observed first bloom (Y), resulting in Y = -1.07 × X2 + 143.62 with R2 = 0.92. These findings suggest that apple anti-chill days are significantly affected by minimum temperatures during the period from dormancy breaking to flowering, indicating their importance in fire blight control measures.