• Title/Summary/Keyword: 최소 지연

Search Result 500, Processing Time 0.028 seconds

Design of a Self-tuning Controller with a PID Structure Using Neural Network (신경회로망을 이용한 PID구조를 갖는 자기동조제어기의 설계)

  • Cho, Won-Chul;Jeong, In-Gab;Shim, Tae-Eun
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.39 no.6
    • /
    • pp.1-8
    • /
    • 2002
  • This paper presents a generalized minimum-variance self-tuning controller with a PID structure using neural network which adapts to the changing parameters of the nonlinear system with nonminimum phase behavior and time delays. The neural network is used to estimate the controller parameters, and the control output is obtained through estimated controller parameter. In order to demonstrate the effectiveness of the proposed algorithm, the computer simulation is done to adapt the nonlinear nonminimum phase system with time delays and changed system parameter after a constant time. The proposed method compared with direct adaptive controller using neural network.

The Investigation of Combustible Hazard by Measurement of Flash Point and Autoignition Temperature of n-Dodecane (노말도데칸의 인화점과 최소발화온도 측정에 의한 연소위험성 고찰)

  • Ha, Dong-Myeong
    • Fire Science and Engineering
    • /
    • v.25 no.2
    • /
    • pp.120-125
    • /
    • 2011
  • For the safe handling of n-dodecane, the explosion limits were investigated and the lower flash points and AITs (autoignition temperatures) by ignition delay time were experimented. By using the literatures data, the lower and upper explosion limits of n-dodecanee recommended 0.6 Vol.% and 4.7 Vol.%, respectively. The lower flash points of n-dodecane by using closed-cup tester were experimented $77^{\circ}$ and $80^{\circ}C$. The lower flash points of n-dodecane by using open cup tester were experimented $84^{\circ}C$ and $87^{\circ}C$. This study measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for n-dodecane. The experimental AIT of n-dodecane was $222^{\circ}C$.

Efficient Multicast Tree Algorithm for Acceptable Delay and Minimum Delay Variation (지연시간 한계의 만족과 효율적인 최소 지연변이 멀티캐스트 트리 생성 알고리즘)

  • Kim Moon-Seong;Choo Hyun-Seung;Lee Young-Ro
    • The KIPS Transactions:PartC
    • /
    • v.12C no.1 s.97
    • /
    • pp.105-110
    • /
    • 2005
  • With the proliferation of multimedia group applications, the construction of multicast trees satisfying QoS requirements is becoming a problem of prime importance. In this paper, we study the delay- and delay variation-bounded multicast tree (DVBMT) problem which is NP-complete. The problem is to construct a spanning tree for destination node, which has the minimized multicast delay variation, and the delay on the path from the source to each destination is bounded. A solution to this problem is required to provide decent real-time communication services such as on-line games, shopping, and teleconferencing. Performance comparison shows that the proposed scheme outperforms DDVCA which is known to be effective so far in any network topology. The enhancement is up to about $3.6{\%}{\~}11.1{\%}$ in terms of normalized surcharge for DUVCA. The time complexity of our algorithm is $O(mn^2)$.

Design of A 2-18GHz Digital Frequency Discriminator using Least-squares and Candidate-selection Methods (최소자승법과 후보군 선택 기법을 이용한 2-18GHz 디지털 주파수 변별기 설계)

  • Park, Jin Oh;Nam, Sang Won
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.6
    • /
    • pp.246-253
    • /
    • 2013
  • Based on the conventional 2-6GHz digital frequency discriminator (DFD) using the phase unwrapping and least-squares techniques, we propose a new 2-18GHz DFD. To compensate for lowered-precision frequency estimation due to the expanded bandwidth, the proposed DFD design employs more delay lines, accordingly accompanying high complexity. Thus, a new computationally efficient frequency estimation algorithm is also presented to overcome such high computational burden. More specifically, the proposed frequency estimation algorithm is basically based on the conventional phase unwrapping technique, along with a new candidates selection for the unwrapped phases under the condition that the phase margin is known. As a result, the computational burden required for the least-squares technique can be reduced. Finally, simulation results are provided to demonstrate the effectiveness of the proposed approach, compared with those of the conventional DFD's.

A Study on the Reliability of the Combustible Properties for Acrylic Acid (아크릴릭산의 연소특성치의 신뢰성 연구)

  • Ha, Dong-Myeong
    • Journal of Energy Engineering
    • /
    • v.24 no.3
    • /
    • pp.20-26
    • /
    • 2015
  • For the reliability of the combustible properties of arylic acid, this study was investigated the explosion limits of acrylic acid in the reference data. The flash points and AITs(auto-ignition temperatures) by ignition delay time were experimented. The lower flash points of acrylic acid by using Setaflash and Pensky-Martens closed-cup testers were experimented in $48^{\circ}C$ and $51^{\circ}C$, respectively. The lower flash points of arylic acid by using Tag and Cleveland open cup testers were experimented in $56^{\circ}C$. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 tester for acrylic acid. The AIT of acrylic acid was experimented as $417^{\circ}C$. The lower explosion limit(LEL) and the upper explosion limit(UEL) by the measured the lower flash point and the upper flash point of acrylic acid were calculated as 2.2 Vol% and 7.9 Vol%, respectively.

A Study on the Application of Pre-Indentation Technique for Fastener Hole Model (FASTENER HOLE 모델의 대한 예비압입 적용 연구)

  • Hwang,Jeong-Seon;Jo,Hwan-Gi
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.9
    • /
    • pp.26-31
    • /
    • 2003
  • Aging aircraft accumulates widespread fatigue damage commonly referred to as multiple site damage(MSO). For ductile material such as 2024-T3 aluminum, MSO may lower the service life below that which is predicted by conventional fracture mechanics. The present paper is concerned with the fatigue life extension by pre-indentation technique for thin 2024-T3 aluminum plate to decelerate the crack propagation rate in the panels with MSO. The panel with fastener holes can be simply modelled by Hole/Slot type Middle-Tension specimen. Results of fatigue testing show significantly improving failure cycles from 10 to 40 times. This retardation effect is decreased by increasing the loading level in the constant amplitude loading. In the sense of retardation mechanism, the crack propagation rate is gradually attenuated by entering the indentation mark and maintains at the lowest value for a long period after the edge of crack passes the center of indentation area.

Design of Ring Topology for Local Access Computer Networks with mean delay time constraint (평균 지연 시간의 제약조건을 갖는 로컬 액세스 컴퓨터 네트워크에서의 링 토폴로지 설계)

  • 이용진;김태윤
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.7
    • /
    • pp.1390-1406
    • /
    • 1994
  • This study deals with the DMCLP(Delay constrained Minimum Cost Loop Problem)-one of problems arising in the design of local access computer networks. The problem consists of finding a set of rings to satisfy the traffic requirements of end user terminals. In the problem, the objective is to minimize the total link cost. This paper presents heuristic algorithm which consists of two phases for this problem, under the constraints that the number of nodes served by a single ring is limited and network mean delay is dropped within the desired time. The algorithm is derived using the clusters obtained by the existing MCLP(Minimum Cost Loop Problem) algorithm and a trade-off criterion explained in the paper. Actually, simulation results in that the proposed algorithm in this paper produces better solution than the existing MCLP algorithm modified. In addition, the algorithm has the relatively short running time.

  • PDF

고전압 펄스 시스템 '천둥'을 이용한 $N_2$, $SF_6$ 혼합기체에서의 전기 스위칭 연구

  • Byeon, Yong-Seong;Song, Gi-Baek;Park, Ji-Hun;Eom, Hwan-Seop;Ryu, Han-Yong;Choe, Eun-Ha
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.503-503
    • /
    • 2012
  • 본 연구에서는 최대전압 600 KV, 최대전류 88 KA, 펄스 폭 60 ns의 특성을 가지는 고전압 펄스 시스템 '천둥'을 이용하여 방전 챔버에 고전압 펄스를 인가하고 $N_2$$SF_6$ 혼합기체 종류와 여러 가지 기체압력에서 전기 트리거를 이용한 방전현상을 전기, 광학적으로 연구하였다. 전극은 구리텅스텐 합금재질의 표준전극을 사용하였고, 전극 간격은 10 mm로 고정하였다. 방전 챔버 압력을 100 torr, 1기압, 2 기압에서 실험을 진행하였고, $N_2$에 대한 $SF_6$의 혼합비율을 0~100%까지 변화시키며 실험을 진행하였다. 전기 트리거 신호가 인가된 펄스 방전 스위치의 방전전압 및 방전 기작원리, 트리거 스위칭 지연시간, 트리거 절연파괴 기작원리, 그리고 이때 생성된 플라스마의 전자 온도 및 밀도에 관한 전기광학 특성 등에 관한 기초연구를 수행하였다. 트리거 펄스가 있을 때의 방전개시전압은 트리거 지연시간 20 us 에서 최소가 되는 특성을 보이며, 이때의 SF6 함량에 따른 최소방전전압과 트리거 펄스가 없을 때의 방전전압을 서로 비교하였다. 이를 통하여 A-K gap 10 mm 조건에서 20 us의 트리거 펄스의 지연시간을 가지는 방전 개시전압은 트리거 펄스가 없을 때 전극 간격이 6 mm에 해당되는 방전개시 전압 값을 가짐을 실험적으로 보였다. 이는 트리거 펄스에 의하여 전극 주위에 쉬스가 형성되며, 이로 인한 전극 간격이 가까워지며, 이와 같은 효과 때문에 방전개시전압은 그만큼 낮아지는 것으로 해석 할 수 있다.

  • PDF

A Distributed Low-cost Dynamic Multicast Routing Algorithm with Delay Constraints (지연시간을 고려한 최소비용의 동적 멀티캐스트 라우팅 알고리즘)

  • Sin, Min-U;Im, Hyeong-Seok
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.39 no.4
    • /
    • pp.180-187
    • /
    • 2002
  • Many real-time multimedia applications, such as video conferencing have stringent end-to-end delay constraints and consume large amount of network resources. In order to support these applications efficiently, multicast routing algorithms computing least cost multicast trees that satisfy a given end-to-end delay constraint are needed. However, finding such a tree is known to be computationally expensive. Therefore, we propose a heuristic distributed multicast routing algorithm that reduces a “finding multicast tree”that satisfies a given end-to-end delay constraint and minimizes the average resulting tree cost. Also, simulation results show that the proposed algorithm has much better average cost performance than other existing algorithms.

New Stability Conditions for Positive Time-Varying Discrete Interval System with Interval Time-Varying Delay Time (구간 시변 지연시간을 갖는 양의 시변 이산 구간 시스템의 새로운 안정 조건)

  • Han, Hyung-Seok
    • Journal of Advanced Navigation Technology
    • /
    • v.18 no.5
    • /
    • pp.501-507
    • /
    • 2014
  • A dynamic system is called positive if any trajectory of the system starting from non-negative initial states remains forever non-negative for non-negative controls. In this paper, new sufficient conditions for asymptotic stability of the interval positive time-varying linear discrete-time systems with time-varying delay in states are considered. The considered time-varying delay time has an interval-like bound which has minimum and maximum delay time. The proposed conditions are established by using a solution bound of the Lyapunov equation and they are expressed by simple inequalities which do not require any complex numerical algorithms. An example is given to illustrate that the new conditions are simple and effective in checking stability for interval positive time-varying discrete systems.