• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.459-466
• /
• 2002

Modern embedded system employs a hybrid architecture which contains a general micro processor and reconfigurable devices such as FPGAS to retain flexibility and to meet timing constraints. It is a hard and important problem for embedded system designers to explore and find a right system configuration, which is known as design space exploration (DSE). With DES, it is possible to predict a final system configuration during the design phase before physical implementation. In this paper, we implement a timing analysis simulator for a DSE on a hybrid embedded system. The simulator, integrating exiting timing analysis tools for hardware and software, is designed by extending Y-chart approach, which allows quantitative performance analysis by varying design parameters. This timing analysis simulator is expected to reduce design time and costs and be used as a core module of a DSE for a hybrid embedded system.

• Korean Journal of Microbiology
• /
• v.22 no.4
• /
• pp.207-214
• /
• 1984

Improved methods for the isolation and purification of conidial protoplast were investigated and conidial proplast from auxotrophic mutants were fused. The reaction time for isolation of protoplasts from the swollen condiospores preincubated in liquid minimal medium supplimented with 2-deoxy-D-glucose was shorten by reaction with mixture of 2% driselase and 2% ${\beta}-glucuronidase$ (1:1). The conidial protoplast could be highly purified by using 5% Ficoll 400 as a centrifugation medium. Nucleus of the conidial protoplast was stained with Giemsa stain and the conidial protoplast had one nucleus. It was also confirmed that the conidial protoplast was true protoplast with no cell wall remnant at the outside of plasma menbrane. Fusion frequencies of the conidial protoplast from auxotrophic mutants ranged from $3.4{\times}10^{-1}\;to\;4.9{\times}10^{-1}$. These values were higher than those of mycelial protoplast by a factor of 5 to 28.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.7-13
• /
• 2017

This study will provide a practical plan of engineering education through the study of major activities connected with the production of works to accomplish the graduation conditions by completing the comprehensive design subject and the result of the performance. The designed subject is to measure the minimum safety distance during driving using the obstacle detection function of the ultrasonic sensor and to perform the avoidance algorithm based on the measurement value of the acceleration gyro sensor. It is proposed an access surveillance system that minimizes the damage of drones, surrounding objects, and people, and improves air mobility. Experimental results show that the obstacles around the drone are detected by five ultrasonic sensors and the difference of output value is applied to each motor of the drone and obstacle avoidance is confirmed. In addition, the content and level of the data for measuring the achievement of learning achievement in the engineering education certification program were used and the results were confirmed to be consistent with the description of the engineering problem level required for the graduates of 4-year engineering college.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.212-221
• /
• 2022

In this paper, the evaluation procedure applying the limit state design method is studied to be consistent with the newly issued bridge design code in Korea. The live load factor for evaluation is proposed by calibrating for the target reliability index through reliability analysis. Using the actual bridge information collected for the representative bridge types in Korea, the load effects of the design live loads for the previous and current design codes are calculated and compared. The live load factor is calibrated through reliability analysis using the minimum required strength which equals to the load effect obtained for the example bridge. Bridge evaluation is performed by applying the live load factors for the evaluation level as well as design level. The load rating result is generally increased by applying the limit state design method compared to the previous design method and applying the proposed load factor for lowered target reliability index further increased the rating result.

• Korean Journal of Agricultural Science
• /
• v.41 no.1
• /
• pp.41-46
• /
• 2014

The pedigree data of 86,639 heads from six major swine breeding farms were investigated to check levels of inbreeding and effective population size of breeding stocks. The average rate of inbreeding was 1.04%, 0.87%, 3.17%, 1.05%, 3.23% and 3.33% for farms A, B, C, D, E and F, respectively. The average inbreeding rate was highest for F farm and lowest for B farm. In farms D and E, there were quite large numbers of immigrant animals per generation compared to other farms. The effective population sizes calculated from the average rate of inbreeding were distributed between 83.0 and 814.8. Specific values were 282.3, 225.5, 83.0, 814.8, 302.9 and 175.7 for farms A, B, C, D, E and F, respectively. The results showed that there was no cause for concern over the current inbreeding level of major swine breeding farm populations and the inbreeding level was within an acceptable range. In addition, internal sharing rather than importing pig is necessary to strengthen seed sovereignty.

• Journal of The Korean Association For Science Education
• /
• v.24 no.3
• /
• pp.468-480
• /
• 2004

It has been criticized that there are discrepancy between 'general statements' of the curriculum and subject-matter curricula. The possible reasons for this are as follows: The developers of the general statements were educational curriculum specialists. These specialists were not good enough to develop general statements and guidelines of subject matter curricula reflecting the characteristics of science contents, to examine developed science curriculum, and to give feedback to science curriculum developers. Under the present curriculum developing system where curriculum is developed in ten months or less by the research team commissioned unpredictably and imminently, it might be difficult to develop valid and precise science curriculum reflecting the purport of the general statements and teachers' needs. The inadequacy of these curriculum development processes resulted in (1) inconsistent statement about the school year to be applied to differentiated curriculum, (2) abstract and ambiguous stating about the characteristics, teaching-learning and assessment guidelines of enrichment activities, and (3) failure to reduce science contents to a reasonable level. Therefore curriculum development centers should be designated in advance to do basic research at ordinary times, and organized into a cooperative system among them. Two years or more of developing time and wider participation of scientists are recommended to develop more valid and precise science curriculum. In addition, commentaries on science curriculum should be published before textbook writing begins.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.113-122
• /
• 2008

This study extended Park et al.(2007c), which analyzed the efficiency of a hierarchical transit network, showed the result of a real data, and analyzed its applicability. Operating cost was estimated using a model which was established in this study, and minimum transit demand was derived from the operating cost. The minimum transit demand value is just a sample calculation, thus it varies by many inside and outside factors of the model. Looking at the inside of the model, operating cost and travel speed are major factors, and the possibility of introducing urban subway becomes high when the operating cost of the transit system is low and its travel speed is high. As far as the outside factors are concerned, according to the analysis on the network structure, transit demand, and transit mode share, the minimum transit demand value which was derived in this study will be the maximum value among the possible values. In the feasibility study, the benefit is likely to be overestimated and the cost is likely to be underestimated than those of this study. It could be concluded that the methodology of a feasibility study is appropriate in the field standard. This study analyzed the efficiency of introduction of urban subway using analytical approach, thus has many shortcomings and limitations. However the practical approach, like feasibility study, has some limitations as well. This study could be a basis on establishing an analysis framework that is more accurate and reasonable by comparing analytical approach and practical approach.

• Journal of the Korean Society for information Management
• /
• v.24 no.2
• /
• pp.161-179
• /
• 2007

As increasingly diverse kinds of information materials are available on the Internet, it becomes a challenge to define an adequate level of metadata provision for each different type of material in the context of digital libraries. This study explores issues of metadata provision for a particular type of material, statistical tables. Statistical data always involves numbers and numeric values which should be interpreted with an understanding of underlying concepts and constructs. Because of the unique data characteristics, metadata in the statistical domain is essential not only for finding and discovering relevant data, but also for understanding and using the data found. However, in statistical metadata research, more emphasis has been put on the question of what metadata is necessary for processing the data and less on what metadata should be presented to users. In this study, a case study was conducted to gauge the status of metadata provision for statistical tables on the Internet. The websites of two federal statistical agencies in the United States were selected and a content analysis method was used for that purpose. The result showing insufficient and inconsistent provision of metadata demonstrate the need for more discussions on statistical metadata from the ordinary web users' perspective.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.370-381
• /
• 2021

This study examines the perceptions and demands of pre-service early childhood teachers about the Demonstration of simulated instruction for 350 students in early childhood education at 3-4 years university located in Busan, Ulsan, and Gimhae. And through this, the purposes of study are to provide basic data based on the current level of pre-school teachers for instructors leading simulated instruction and to seek effective management plans for simulated instruction to improve teaching ability. As a result of the study, pre-service early childhood teachers recognized that simulated instructions were necessary in teacher training course and helped to improve teaching ability, but they did not actively agree to expand simulated instructions and were not very satisfied with the methods of instructors in demonstration of simulated instruction. They wanted to receive feedback from instructors who have practical teaching knowledge and skills based on field experience at least two times during preparation stage and evaluation stage of the simulated instructions. And they wanted to be guided specifically on principles and methods of preparing educational plans, effective interactions and questions with young children. They wanted the feedback, the most preferred form of feedback is form of participations by all class members and instructors. In addition to instructor's feedback, they required experience of simulated instruction in which infants and toddlers participate together.

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.86-106
• /
• 2002

Informatization is a process that corporation's external environmental factors and internal environmental factors influence as complex. is a phenomenon that appears via this process. To evaluate that informatization was propeled well or informatization level is high can be dangerous work extremely by only once-over-lightly some factors, organization information ability is superior or infrastructure is constructed well. Therefore, an evaluation for industrial information systems that consider corporation's external environment and internal environment configurationally and objective estimation through this is required in national dimension. This research sorted types of business using types of business classification of 2001 EIII(Evaluation Indices of Industrial Informatization) laying stress on corporation's product and product production process for reflecting various industrial classification. And we are dividing whole our country corporations by manufacture industry, the construction industry, distribution industry, service industry, banking industry 5 types of business. To see such classed types industry classification from consistent viewpoint, we saw them within new framework, purchase, operation, physical distribution, marketing and sale. service etc. laying stress on primary businesses except support businesses of planning, financial management etc. To draw special quality of business center from primary business of each types of business, we draw industry classification Key Capability that centers when plans corporation's corporate strategy and information strategy. And we deducted industrial classification key production business connected with industry classification Key Capability. After drawing an evaluation items for industrial information systems in informatization analysis viewpoint laying stress on drawn businesses. Finally we did Case Study by making out an evaluation for industrial information systems questionnaire that considers special quality of manufacturing industry. Through EIII that consider the industrial classification, we could know that it explains the corporation's purchase, production, distribution in general and detail.