• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.72-85
• /
• 2001

A study for the structural strength evaluation on the doubler plate subjected to the biaxial in-plane compression has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate, elasto-plastic large deflection analysis is introduced including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed based on their results. A1so, in order to compare the doubler structure with the original strength of main plate without doubler, a simple formula for the evaluation of the equivalent flat plate thickness is derived based on the additional series analysis of flat plate structure. Using this derived equation, the thickness change of a equivalent flat plate is analyzed according to the variation of various design parameters of doubler plate and some design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas by author et a1. is discovered and these relations are formulated for the future development of simple strength evaluation formula of doubler plate structure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.156-162
• /
• 2004

In this paper, a technique that estimate the optimal capacity of the solar-wind hybrid power system for minimizing the total monthly electric power expenses is presented. The hybrid power system is assumed to be operated in connection with the utility power system and electric bill be paid for the power not covered by the hybrid system generation. Monthly generation cost is estimated based on total life-cycle cost analysis. The monthly utility power bill is assumed to be increased quadratically in proportion with the net utility power consumption which is the difference between the total monthly load minus the hybrid system generations. Test results demonstrate applications potential of the proposed technique.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.6.1-6.1
• /
• 2010

원자층 증착 기술 (Atomic Layer Deposition)은 기판 표면에서 한 원자층의 화학적 흡착 및 탈착을 이용한 nano-scale 박막 증착 기술이기 때문에, 표면 반응제어가 우수하며 박막의 물리적 성질의 재현성이 우수하고, 대면적에서도 균일한 두께의 박막 형성이 가능하며 우수한 계단 도포성을 확보 할 수 있다. 최근 ALD에 의한 박막증착 방법 중 플라즈마를 이용한 ALD 증착 방법에 대한 다양한 연구가 진행되고 있다. 플라즈마는 반응성이 좋은 이온과 라디컬을 생성하여 소스간 반응성을 좋게 하여, 소스 선택의 폭을 넓어지게 하고, 박막의 성질을 좋게 하며, 생산성을 높일 수 있는 장점이 있다. 그러나 플라즈마를 사용함으로써 플라즈마 내에 이온들이 가속되서 박막 증착 중에 기판 및 박막에 손상을 입혀 박막 특성을 열화 시킬 가능성이 있다. 따라서 플라즈마 발생 영역을 기판으로부터 멀리 떨어뜨린 원거리 플라즈마 원자층 공정이 개발 되었다. 이 기술은 플라즈마에서 생성된 ion이 기판이나 박막에 닫기 전에 전자와 재결합 되거나 공정 chamber에서 소멸하여 그 영향을 최소하고 반응성이 좋은 라디칼과의 반응만을 유도하여 향상된 막질을 얻을 수 있도록 하였다. 따라서 이 원거리 플라즈마 원자층 증착기술은 나노 테크놀러지 소자 개발하기 위한 나노 박막 기술에 있어서 그 활용이 점점 확대될 것이다. 그 적용으로써 리모트 플라즈마 원자층 증착 방법을 이용한 고유전 물질 개발이 있다. 반도체 소자의 고집적화 및 고속화가 요구됨에 따라 집적회로의 크기를 혁신적으로 축소하여 스위칭 속도(switching speed)를 증가시키고, 전력손실 (power dissipation)을 줄이려는 시도가 이루어지고 있다. 그 중 하나로 고유전율 절연막은 트렌지스터 소자의 스케일링 과정에 수반하여 커지는 게이트 누설 전류를 억제하기 위한 목적으로 도입되었다. 유전율이 크면 동일한 capacitance를 내는데 필요한 물리적인 두께를 늘릴 수 있어 전자의 tunneling을 억제할 수 있고 전력손실을 줄일 수 있기 때문이다. 이와 같은 고유전율 물질이 게이트 산화막으로 사용되기 위해서 높은 유전상수 열역학적 안정성, 낮은 계면 전하밀도, 낮은 EOT, 전극 물질과의 양립성 등의 특성이 요구되는데, 이에 따라 많은 유전물질에 대한 연구가 진행되었다. 기존 gata oxide를 대체하기 위한 가장 유력한 후보 재료로 주목 받고 있는 high-k 물질들로는 Al2O3, HfO2, ZrO2, La2O3 등이 있다. 본 발표에서는 ALD의 종류에 따른 기술을 소개하고 그 응용으로 고유전율 물질 개발 연구 (고유전율 산화물 박막의 증착, 고유전율 산화물의 열적 안정성 평가, Flatband 매카니즘 규명, 전기적 물리적 특성 분석)에 대해서 발표 하고자 한다.

• 한국해양학회지
• /
• v.26 no.2
• /
• pp.155-168
• /
• 1991

In order to study the community structure and distribution patterns of primary producers and their relations to abiotic environmental factors, phytoplankton and environmental parameter were determined during the five times from October, 1989 to July. 1990. 159 taxa of phytoplankton have been identified and the most important species group is diatom which contributes to 70.4% of the total number of species. Ratios of phytoplankton group (neritic species, fresh water species, oceanic species) clustered by habitats were 52%, 18%, 12%, respectively, suggesting study area be the typical estuarine environment which is strongly affected by both fresh water discharge and sea water penetration. Species composition could be governed by the variations of salinity. the standing stocks of primary producer in the study area vary with space and time, showing close correlation with water transparency, and exhibit relatively larger than those of other coastal regions in the Yellow Sea. Spectransies diversity also showed large variation with space and time. According to the cluster analysis, the study area could be divided into two regions (inner part and outer part): in fall and winter, outer area affected by the oceanic water, but in spring and summer, inner estuarine area heavily influenced by fresh water.

• Korean journal of applied entomology
• /
• v.29 no.1
• /
• pp.14-19
• /
• 1990

Nematodes and insects associated with dead trees were surveyed on the 238 dead trees belonging to 19 tree species in Pusan, Gyeongnam, Gyeongbuk, Chunnam, and Chonbuk provinces from April to September of 1989. Pine wood nematode, Bursaphelenchus xylophilus was found only in Pusan but B. mucronatus was collected at Chinju and Chinhae. The 13 nematode species in 9 genera were identified. Out of them, Diplogasteroides dimidius, Rhabdontolaimus adephagus, R. janae, Mikoletzkya diluta, M. ruminis, M. langcaudaa, Parasitorhabditis hylurgi, Panagrolaimus concolor, Panagrodontus dentatus, Prothalonema intermedium, and marcrolaimus canadensis were recorded for the first time in Korea. Insects collected from dead trees were 5 orders, 9 families, 25 genera, and 27 species. of them, the Coleoptera were the most collected insects by the 3 families, 19 genera and 22 species. The Scolytidae were 12 species in 10 genera. Hypothenemus eruditus was firstly collected from Campylotropis macrocarpa, Lespedeza maximowizi, Forsythia ovata, Meliosma oldhami, Securinega suffruticosa, Broussonetia kazinoki, and Cornus walteri. The maximum number of pine wood nematode was separated from the abdomen of Monchamus alternatus, the pine woodnematode vector. The maximum number of nematodes per an adult of M. alternatus was 127,535, minimum 2,616, and average 42,817.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.88-95
• /
• 2015

For the frequency-domain spectral fatigue analysis, the probability density function of stress range needs to be estimated based on the stress spectrum only, which is a frequency domain representation of the response. The probability distribution of the stress range of the narrow-band spectrum is known to follow the Rayleigh distribution, however the PDF of wide-band spectrum is difficult to define with clarity due to the complicated fluctuation pattern of spectrum. In this paper, efforts have been made to figure out the links between the probability density function of stress range to the structural response of wide-band Gaussian random process. An artificial neural network scheme, known as one of the most powerful system identification methods, was used to identify the multivariate functional relationship between the idealized wide-band spectrums and resulting probability density functions. To achieve this, the spectrums were idealized as a superposition of two triangles with arbitrary location, height and width, targeting to comprise wide-band spectrum, and the probability density functions were represented by the linear combination of equally spaced Gaussian basis functions. To train the network under supervision, varieties of different wide-band spectrums were assumed and the converged probability density function of the stress range was derived using the rainflow counting method and all these data sets were fed into the three layer perceptron model. This nonlinear least square problem was solved using Levenberg-Marquardt algorithm with regularization term included. It was proven that the network trained using the given data set could reproduce the probability density function of arbitrary wide-band spectrum of two triangles with great success.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.93-96
• /
• 2008

We analyze a precise seabed feature around the Hupo Bank by using Multi-beam echosounder. Multi-beam echosounder system can observe the topography undulation according to the navigation of the survey ship by shooting wide beam. It is possible to embody a precision seabed feature because it can be make high density of incompletion depth sounding between survey lines. Through this survey, there is the Hupo Bank which is 84 km long, 1-15 km wide, 5.3-160 m deep in the center, at the west is moat, at the east is scarp and submarine canyon. The top of the Hupo Bank is the Wangdol reef that has 5.3 m in depth of water at least. Moat in survey area is 30 m long, and 30-40 m wide and has a depressed channel. The gap of depth of water in scarp is approximately 60 m and shows a characteristic of cuttig plane. Submarine canyon is 3.5 - 13.5 km wide.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.11-11
• /
• 2003

전자현미경내에서 일부 무기 및 금속 시료들은 전자빔 조사에 의해 시료구조가 손상되거나 비정질화 또는 상전이 등과 같은 구조전이 현상들을 겪게 된다. 즉, 전자빔 조사에 의해 시료는 원자간 결합이 끊어져 나타나는 Knock-on damage, 시료 원자 주위의 전자들과의 상호 작용에 의해 나타나는 Ionization damage, 빔 에너지의 시료온도 상승 기여에 의한 Radiolysis damage 등의 현상들을 경험하게 된다. 이러한 현상은 전자현미경의 가속전압, 전자밀도, 시료 조건 등에 따라 그 지배기구가 다르며 동일한 시편이라도 시료의 두께와 시편온도를 결정하는 전자빔 조사선량에 따라 그 양상과 전이 속도가 달라진다. 본 연구에서는 전자빔 조사에 의해 구조 전이를 겪게 되는 대표적 무기수화물의 하나인 Cibbsite에 대해 전자빔 조사효과에 대한 정량적 고찰을 에너지 여과 투과전자현미경 (EF-TEM)을 이용하여 시도하였다. 전자빔 조사는 120분까지 실시하였고 각 시간별로 에너지 필터와 Imaging plate를 이용하여 Gibbsite의 회절패턴과 미세조직 변화를 기록하였다 빔조사 시엔 illumination angle을 1.25mrad(Dose rate : 334 × 10³ e/sup -//sec·n㎡)으로 하였으며 사진기록 시엔 최소 illumination angle인 0.04mrad(Dose rate : 413 e/sup -//sec·n㎡)을 사용하였다. 시료의 관찰방향은 [001]방향이고 관찰시료두께는 약 50nm로 평가되었으며 시료의 화학변화는 EDS를 이용하여 분석하였다. 회절자료의 Intensity는 ELD/CRISP 프로그램을 이용하였으며 빔조사선량은 평행조사빔이 시료와 상호 작용하는 면적과 상호작용하지 않을 때의 빔을 회절모드에서 faraday cup으로 측정한 빔전류로 부터 계산하였다. Gibbsite에 대한 전자빔 조사 시 1분 이내에 급격한 Hydroxyl Ion(OH-)의 이탈로 인해 Cibbsite의 구조는 거시적 비정질화가 되며 시간증가에 따라 χ-alumina → ν-alumina → σ-alumina or δ-alumina의 순으로 상전이를 겪는다. 전자빔 조사 시 관찰된 회절자료의 가시적 변화를 통해 illumination angle 1.25mrad(Dose rate : 334 × 10³ e/sup -//sec·n㎡)일 경우 약 3초 이내에 비정질화가 시작됨을 알 수 있었고 이는 약 1 × 10/sup 6/ e/sup -//sec·n㎡ 의 전자선량에 해당되며 이를 기준으로 각각의 illumination angle에 대한 임계전자선량을 평가할 수 있었다. 실질적으로 Cibbsite와 같은 무기수화물의 직접가열실험 시 전자빔 조사에 의해 야기되는 상전이 영향을 배제하고 실험을 수행하려면 illumination angle 0.2mrad (Dose rate : 8000 e/sup -//sec·n㎡)이하로 관찰하고 기록되어야 함을 본 자료로부터 알 수 있었다.

• Journal of Hydrogen and New Energy
• /
• v.3 no.2
• /
• pp.55-62
• /
• 1992

To improve the MCFC performance it is important to distingush between polarization losses occuring in the individual electrodes and other components. In this study a current interruption technique has been applied to a MCFC unit cell having a reference electrode to separately study the contributions of IR loss and other polarization losses. At a current density of $150mA/cm^2$ the IR-free polarization of a Ni anode was about 60mV while that of a NiO cathode was 130mV and the Ohmic loss of the cell was as large as 170mV suggesting that both the cathode and the cell structure need further improvement. The thin-film electrode model was used to simulate the performance of the electrodes. Both andoe data and cathode data were successfully fitted.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.9-16
• /
• 2017

Researchers are now faced with a limited flight time of the hoverable UAV due to the sluggish technological advances of the Li-Po energy density and try to find a bypassing solution for the fully autonomous hoverable UAV mission planning. Although there are several candidate solutions, automated wireless charging is the most likely and realistic candidate and we are focusing on the autolanding strategy of the hoverable UAV in this paper since it is the main technology of it. We developed a hoverable UAV flight simulator including Li-Po battery pack simulator using MATLAB/Simulink and UAV flight and battery states are analyzed. The maximum motor power measured as 1,647 W occurs during the takeoff and cell voltage decreases down to 3.39 V during the procedure. It proves that the two Li-Po battery packs having 22 Ah and connected in series forming 12S1P are appropriate for the autolanding mission planning.