• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.91-97
• /
• 2010

This paper proposes method to evaluate the location and size of the internal defects of metallic specimens by the shearing phase lock-in infrared thermography. Until now, infrared thermography test for metal specimen of STS304 and Cu-Zn were conducted to find the best test conditions. However, In unspecified situation of the form and existence of defects, there was a disadvantage to takes a long time for finding the optimal experimental conditions. The defect detection and evaluation was performed at 60 MHz signal using lock-in and shearing-phase method under limited heating conditions. By shearing-phase distribution method, Defects for the maximum, minimum and zero points were quantitatively detected at the size and location of the subsurface. As results, application of the proposed technique was verified for STS304 and Cu7-Zn3 with artificial defect and factors affected defect evaluation were searched and analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.366-374
• /
• 2018

In cases of airborne equipped with SAR, because the occurrence of motion is inevitable, it is necessary to apply autofocus techniques to SAR images to improve the image performance degradations caused by residual errors. Herein, a robust autofocus algorithm based on the minimum entropy criteria is proposed for the real SAR data in the spotlight mode. The convergence condition of the phase error estimation is checked at every iteration and if it is violated, the size of the phase error estimation is adjusted to the convergence condition. The real SAR raw data is used to demonstrate the excellent performance of the proposed algorithm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.296-304
• /
• 2001

A new method of measuring the thermal diffusivity of solid material at room temperature using photothermal displacement is proposed. The influence of the parameters, such as radius and modulation frequency of the pump beam and the sample thickness, was studied. From the minimum position of phase of measured deflection with respect to the pump beam, the thermal diffusivity of the materials can be obtained. The position where phase has the minimum value is determined using multiparameter least-square regression fitting. The experimental values for different samples obtained by applying the new method are in good agreement with the literature values.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.11-14
• /
• 2001

원자력 발전소의 증기 발생기는 증기량과 급수량에 대한 비 최소위상 특성과 비선형성, 그리고 입력 제한 특성을 가지고 있다. 이러한 특성들은 증기 발생기의 효과적인 수위 제어에 어려움을 주고 있다. 본 논문에서는 게인 스케줄링 기법과 변형된 슬라이딩 모드 제어 기법을 이용한 원전 증기 발생기 제어기를 제안한다. 또한 앞먹임 구조를 가진 PI 제어기를 설계하여 저출력 영역에서 제안된 슬라이딩 모드 제어기와 성능을 비교한다. 모의 실험 결과 제안된 슬라이딩 모드 제어기가 최대 수위, 최소 수위, 그리고 안정화 시간 면에서 개선된 성능을 보였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.948-949
• /
• 2015

일반적으로 IPMSM의 전압방정식은 d축과 q축이 90도의 위상차를 가지고 있기 때문에 d-q축 간의 상호 인덕턴스를 고려하지 않는다. 하지만 실제로는 d축의 인덕턴스는 q축 전류에 영향을 받으며, 반대로 q축의 인덕턴스도 d축 전류에 영향을 받는다. 따라서 비선형 모델링을 통해 실제 전동기의 형태에 더 가깝게 묘사 하였다. 또한 일반적인 수학식으로 계산하여 Ldq, Lqd를 구해 LPF 필터를 사용하였고 이산적인 최소자승법을 이용한 Gain값을 통해 과도상태에서 더 적합한 LPF와 최소자승법을 비교하는 논문이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.3
• /
• pp.388-394
• /
• 2003

Hydraulic system is difficult to obtain a suitable performance due to the nonlinearity load pressure change and system parameter variation. The requirement of control a1gorithm has been complex in order to satisfy the performance. The adaptive control is a control method which is suggested to achieve the control object under the plant characteristics change. In spite of the case that plant characteristics and the degree of variation are difficult to grasp. the adaptive control could keep the characteristics of closed-loop system generally. In this study. a method of combined generalized minimum variance adaptive control (GMVAC) and output error feedback is proposed, in order to solve the problem of non-minimum phase of plant and the vibration and overshoot in initial response. The control performance according to the variation of characteristics of plant is evaluated by changing the supply pressure. The experimental results show the effectiveness of the proposed scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.267-273
• /
• 2021

Non-orthogonal multiple access is the promised candidates in the next generation wireless networks to improve the spectral efficiency by superposing multiple signals. In general, the superposition coding is performed using the difference in channel gain between users based on the user's power allocation. However, when user pairs have the similar channel gain problem, NOMA can not be allowed in the scenario. To overcome this problem, phase rotation based NOMA is presented to increase minimum distance between superposed signals in the constellation point. This paper proposed a novel non-orthogonal multiple access based index modulation using phase rotation. The additional bits can transfer using the index bits that is allocated according to the activated state of the phase rotation. Simulation results are shown that bit error rate and achievable sum rate are better than conventional NOMA.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.148-154
• /
• 2005

This paper deals with performance degradations caused by RF I/Q impairments such as amplitude mismatch and phase mismatch in W-CDMA user equipment which uses QPSK(Quadrature Phase Shift Keying) modulation. The impacts of I/Q impairments on the BER(Bit Error Rate) are analyzed by using the variations of adjacent symbol distance. The BER versus amplitude mismatch and phase mismatch with QPSK constellation is reviewed through Matlab simulation. Performance degradation produced by RF I/Q impairments is measured with the implemented RF transceiver and modulation/demodulation test equipments through EVM(Error Vector Magnitude). The minimum performance requirements of amplitude mismatch and phase mismatch in W-CDMA user equipment are presented from the point of hardware implementation and the test method of the impairments is also included.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.380-387
• /
• 2002

In this paper, the effect of the phase noise of a local oscillator on the ACPR of a transmitter and the reception sensitivity of a receiver to meet the TIA/EIA/IS-98-D for the CDMA mobile station was analyzed. And the optimum condition for performance of the local oscillator was suggested. It was found that the phase noise level of the local oscillator in a receiver and a transmitter should be below -138.3dBc/Hz and -120dBc/Hz, respectively, at 900kHz offset. It was confirmed that the reception sensitivity and ACPR efficiency were satisfactory when the signal of the local oscillator to the down-converter of a receiver with the phase noise level of less than -138.3dBc/Hz is supplied to the up-converter of the transmitter.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.59-66
• /
• 1997

The relationship between Mg II emission line and light variation of V711 Tau has been derived to investigate the chromospheric activity on V711 Tau. First, a shape of an optical light curve was compared with that of ultraviolet constructed from the IUE low resolution spectra. Second, the intensities of Mg II k emission lines have been reduced from IUE high resolution spectra. The intensity of Mg II k line was compared with brightness of the UV light curve at given phase. The Mg II line intensity is maximum at the phase $O.^{P}4$ where the light is minimum. The evidence of chromosperic activity is indicated by the intensity variation of the MgII emission line with orbital phase for V711 Tau.