• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1216-1221
• /
• 2003

The specimen materials used in this research is bimaterial. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic hybrid method was introduced and it's validity had been assured. The static photoelastic hybrid method was applied to the Minimum Strain Energy Density Criterion, the Maximum Tangential Stress Criterion and Mode Mixity. Crack propagation criterion by the static photoelastic hybrid method was introduced and it was applied to the above various failure theories. Comparing the experimental initial angle of crack propagation with the theoretical initial angle of crack propagation from the various failure criterions. And then the optimal crack propagation criterion was suggested and it's validity was assured.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.101-108
• /
• 2001

In this study, the static and dynamic characteristics of endmilling process were modelled and the analytic realization of chatter mechanism was discussed. In this reward, We have discussed on the comparative assessment of recursive time series modeling algorithms that cal represent time machining process and detect the abnormal machining behaviors in precision endmilling operation. In this study, simulation and experimental works were performed to show the malfunctional behaviors. For this purpose, new recursive algorithm(RLSM) was adopted for the oil-line system identification and monitoring of a machining process, we can apply these new algorithms in real process for detection of abnormal chatter. Also, The stability lobe of chatter was analysed by varying parameter of cutting dynamics in regenerative chatter mechanics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10C
• /
• pp.991-999
• /
• 2006

This paper shows that the support growth of an optimum (minimum mean square-error) scalar quantizer for a Laplacian density is logarithmic with the number of quantization points. Specifically, it is shown that, for a unit-variance Laplacian density, the ratio of the support-determining threshold of an optimum quantizer to $\frac 3{\sqrt{2}}1n\frac N 2$ converges to 1, as the number of quantization points grows. Also derived is a limiting upper bound that says that the optimum support cannot exceed the logarithmic growth by more than a constant. These results confirm the logarithmic growth of the optimum support that has previously been derived heuristically.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.36-44
• /
• 2005

Nowadays, various kind of rubber-like materials are used in industry. These are usually installed in automobiles, trains, etc. They work as dampers or important parts in the system, and the applications for rubber-like materials are increasing. In the past days, rubber engineers and designers predicted rubber material behaviors by the analytic method for limited problems. With the progress of digital computers, Finite Element Methods is widely used for analyzing the rubber-like materials. The popular methods predicting rubber material property are curve fitting and least square method, but there are some problems such as low precision and tedious solving process. Here, we introduce a method estimating rubber material property by successive zooming genetic algorithm(SZGA). The proposed algorithm offers more precise rubber property. To demonstrate the effectiveness of the proposed algorithm, we compared this method with Haines & Wilson's method, MARC, ABAQUS.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.61-71
• /
• 2002

광양만내 해양바이러스양은 2.0$\times$$10^{8}$ particles/ml로 매우 풍부했다. 각 계절별 바이러스의 밀도는 여름에 최대 9.0$\times$$10^{8}$ particles/ml에서 겨울에는 최소값인 0.7$\times$$10^{8}$ particles/ml을 기록했다. 광양만 내의 바이러스, 박테리아, 식물플랑크톤 생물량의 공간적 분포는 open ocean system에 해당하는 정점 28, 38, 42, 46, 51에서 보다 closed estuarine system에 해당하는 정점 2, 5, 10 ,12, 16, 20에서 많은 것으로 나타났다. 그리고, 다른 closed estuarine system에 해당하는 정점 22, 26, 32, 34는 높은 바이러스 밀도를 보였지만 상대적으로 open ocean system에 비해서 낮은 박테리아와 식물플랑크톤의 생물량을 나타냈다. 몇몇 정점의 수심 깊이에서는 박테리아의 밀도가 바이러스의 밀도를 100배정도 초과했다. 해양 바이러스와 그들의 host system의 계절별 밀도는 역동적으로 번화했으며, 그들의 계절별 변화는 밀집한 상호연관성을 가졌다. 여름에 바이러스와 박레리아의 밀도는 증가된 반면 식물플랑크톤의 엽록소-a 농도는 평균값을 유지하였다. 겨울에는 바이러스와 박테리아의 밀도가 급속하게 줄어들었고, 마찬가지로 엽록소-a 농도 역시 감소하다가, 곧 다시 증가했다. 바이러스의 밀도는 2001년 8월에 최고점에 도달했으며, 박테리아의 밀도는 2001년 8월과 2002년 6월에 최고값을 가졌다. 반면에 엽록소-a의 농도는 2002년 4월에 최대치에 도달했다. 전체 host와 바이러스 밀도로 볼 때, 그들의 pool은 바이러스에 의한 mortality에 의해서 steady-state 상태로 유지되고, 바이러스의 밀도 또한 steady-state를 유지하는 것으로 보였다. 이러한 시도는 우리 나라 광양만 내에 존재하는 해양 바이러스의 생태적 분포 연구를 다루는 첫 번째 실험으로 사료된다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.4
• /
• pp.257-265
• /
• 2004

Numerical analysis, as EAM(Embedded Atom Method), in the atomic level is necessary to analyze the relation between the hydrogen and hydrogen absorption metals. EAM established on density functional theory was developed as a new means for calculating various properties and phenomena of realistic metal systems. In this study, we had constructed the EAM program from constitutive formulae and parameters of the hydrogen, nickel and palladium for the purpose of predicting the expansion behavior on hydrogen absorbing. In result, not only the ground state properties of metals but also lattice constants and the volume expansion ratio of metal hydrides show good agreement with Daw's data and experiment data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.33-39
• /
• 2010

Correntropy is a generalized correlation function that contains higher order moments of the probability density function (PDF) than the conventional moment expansions. The criterion maximizing cross-correntropy (MCC) of two different random variables has yielded superior performance particularly in nonlinear, non-Gaussian signal processing comparing to mean squared error criterion. In this paper we propose a new blind equalization algorithm based on cross-correntropy criterion which uses, as two variables, equalizer output PDF and Parzen PDF estimate of a set of randomly generated symbols that complies with the transmitted symbol PDF. The performance of the proposed algorithm based on MCC is compared with the Euclidian distance minimization.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.285-289
• /
• 2000

It has been well known that weak axial magnetic field on the process plasma enhances plasma density. As the magnetic field helps a specific polarized EM wave mode to penetrate into the plasma, the energy transfer to the plasma enhances and the ion density increases. We have analyzed systematic change of the dispersion relation caused by the cyclotron resonance condition. This resonance occurs at near 5 gauss to provide minimum penetration depth, as known before. RF penetration depth increases abruptly beyond the magnetic field of 5 gauss, and this phenomena lessen as the collision frequency increases.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.51-55
• /
• 1997

Three soils, sandy loam, loam and silty clay loam, were selected and three inches soil cores with 4 bulk density(BD) levels were made by compressing the soils wetted with 3 levels water. Mechanical and water characteristics were measured and analyzed the mechanical resistance limiting water, available water and least-limiting water range. Mechanical resistance limiting water(MRLW) were appeared at higher bulk density than $1.6Mg/m^3$ in sandy loam, and $1.4Mg/m^3$ in loam and silty clay loam. The least-limiting water ranges were sharply decreased at the bulk density $1.6Mg/m^3$ in sandy loam and loam, $1.4Mg/m^3$ in silty clay loam. There were big deferences between available water contents and least limiting water ranges in finer texture and higher bulk density soils.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1799-1806
• /
• 2004

The static photoelastic experiment was applied to orthotropic materials. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method for orthotropic material was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (${\gamma}$) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of orthotropic material(C.F.E.C.).