• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.211-211
• /
• 2018

미해양대기청 기후예측센터(Climate Prediction Center, NOAA)에서 제공하고 있는 기후지수(climate indices)를 예측인자로 하고 금강유역의 5~6월의 강우량을 예측대상으로 하는 원격상관기반 통계모형을 구축하였다. 1988년부터 2017년까지의 30년 자료에 대해 예측인자와 예측대상간의 시간지연상관분석을 수행한 결과 NAO(North Atlantic Oscillation), EP/NP(East Pacific/North Pacific Oscillation), EA(East Atlantic Pattern), WP(Western Pacific Index) 등과 상관성이 높은 것으로 분석되었으며, 이러한 시간지연 기후지수를 이용하여 4개월전에 5,6월 강수량을 예측할 수 있는 다중회귀모형을 개발하였다. 관측 강우량 아노말리가 큰 경우에는 다소 과소 예측되고, 아노말리가 작은 경우에는 다소 과다 예측되는 경향을 보였지만 관측 강우량과 예측 강우량간의 상관계수가 0.75로서 비교적 우수한 예측 결과를 나타내었다. 5~6월 강우량 아노말리의 3분위 예측성을 평가한 결과 평년이상 적중률은 77.8%, 평년수준은 81.8%로서 예측 성공률이 높았으며, 5, 6월 누적강우량이 매우 작았던 92년과 95년을 제외하고는 강우량이 적은 해에도 예측성이 우수하여 평년이하 적중률이 70.0%를 나타내었다. 따라서 본 개발모형은 최소 4개월 이전 선행시간을 가지고 늦봄, 초여름강우량을 예측할 수 있는 저비용의 가뭄 예측 도구로 유용하게 활용될 수 있을 것이다.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.287-295
• /
• 2012

This study aims to develop the methods for effective patient flow in the medical center through simulation modeling. To achieve this, we developed three simulation scenarios based on max/min processing time and addition of X-ray by 15 patient tracks from real hospital data. The simulation software used in this study is Flexsim HC 2.7. According to the scenario 1 on 15 patient tracks' LOS by max processing time, there is a great difference between average length of stay(LOS) and max LOS. And average LOS increases greatly depending on the number of patients by the hours. There is no need to add extra X-ray because the addition of X-ray has not much influence in average LOS. It is possible to make good decisions on patient flow management and medical equipment purchasing through simulation modeling. The concrete simulation scenario as a tool for decision support will contribute to efficiency in hospital management.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.22-27
• /
• 2014

Purpose There is the recent PET/CT scan in tendency that use low dose to reduce patient's exposure along with development of equipments. We diminished $^{18}F$-FDG dose of patient to reduce patient's exposure after setting up GE Discovery 690 PET/CT scanner (GE Healthcare, Milwaukee, USA) establishment at this hospital in 2011. Accordingly, We evaluate acquisition time per proper bed by change of infusion dose to maintain quality of image of PET/CT scanner. Materials and Methods We inserted Air, Teflon, hot cylinder in NEMA NU2-1994 phantom and maintained radioactivity concentration based on the ratio 4:1 of hot cylinder and back ground activity and increased hot cylinder's concentration to 3, 4.3, 5.5, 6.7 MBq/kg, after acquisition image as increase acquisition time per bed to 30 seconds, 1 minute, 1 minute 30 seconds, 2 minute, 2 minutes 30 seconds, 3 minutes, 3 minutes 30 seconds, 4 minutes, 4 minutes 30 seconds, 5 minutes, 5 minutes 30 seconds, 10 minutes, 20 minutes, and 30 minutes, ROI was set up on hot cylinder and back radioactivity region. We computated standard deviation of Signal to Noise Ratio (SNR) and BKG (Background), compared with hot cylinder's concentration and change by acquisition time per bed, after measured Standard Uptake Value maximum ($SUV_{max}$). Also, we compared each standard deviation of $SUV_{max}$, SNR, BKG following in change of inspection waiting time (15minutes and 1 hour) by using 4.3 MBq phantom. Results The radioactive concentration per unit mass was increased to 3, 4.3, 5.5, 6.7 MBqs. And when we increased time/bed of each concentration from 1 minute 30 seconds to 30 minutes, we found that the $SUV_{max}$ of hot cylinder acquisition time per bed changed seriously according to each radioactive concentration in up to 18.3 to at least 7.3 from 30 seconds to 2 minutes. On the other side, that displayed changelessly at least 5.6 in up to 8 from 2 minutes 30 seconds to 30 minutes. SNR by radioactive change per unit mass was fixed to up to 0.49 in at least 0.41 in 3 MBqs and accroding as acquisition time per bed increased, rose to up to 0.59, 0.54 in each at least 0.23, 0.39 in 4.3 MBqs and in 5.5 MBqs. It was high to up to 0.59 from 30 seconds in radioactivity concentration 6.7 MBqs, but kept fixed from 0.43 to 0.53. Standard deviation of BKG (Background) was low from 0.38 to 0.06 in 3 MBqs and from 2 minutes 30 seconds after, low from 0.38 to 0 in 4.3 MBqs and 5.5 MBqs from 1 minute 30 seconds after, low from 0.33 to 0.05 in 6.7 MBqs at all section from 30 seconds to 30 minutes. In result that was changed the inspection waiting time to 15 minutes and 1 hour by 4.3 MBq phantoms, $SUV_{max}$ represented each other fixed values from 2 minutes 30 seconds of acquisition time per bed and SNR shown similar values from 1 minute 30 seconds. Conclusion As shown in the above, when we increased radioactive concentration per unit mass by 3, 4.3, 5.5, 6.7 MBqs, the values of $SUV_{max}$ and SNR was kept changelessly each other more than 2 minutes 30 seconds of acquisition time per bed. In the same way, in the change of inspection waiting time (15 minutes and 1 hour), we could find that the values of $SUV_{max}$ and SNR was kept changelessly each other more than 2 minutes 30 seconds of acquisition time per bed. In the result of this NEMA NU2-1994 phantom experiment, we found that the minimum acquisition time per bed was 2 minutes 30 seconds for evaluating values of fixed $SUV_{max}$ and SNR even in change of inserting radioactive concentration. However, this acquisition time can be different according to features and qualities of equipment.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.209-218
• /
• 2001

Global exposure time distribution through all-sky survey, one of main science missions of KAISTSAT-1, has been simulated. Exposure time distribution has its minimum on the celestial equator and increases with moving to polar regions according to the present mission operation scenario. SAA (South Atlantic Anomaly) and the moon can make further decreases of exposure time around the celestial equator Effects of SAA on all-sky survey exposure time can be compensated with a simple observational scheduling, orbit exchange between orbits allocated to all-sky survey passing through the SAA region and ones allocated to upper atmosphere observations not affected by SAA. It, however, seems that present exposure time distribution is not adequate for the concrete study of the evolution of interstellar medium. A scheme for active time allocation is needed for redistribution of exposure times weighted around the celestial poles, and additional studies on the advanced mission operation and the observational scheduling are also needed.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.47-53
• /
• 1992

대도시의 자동차 배기가스에 의한 대기오염문제는 날로 심화되어 가고 있으며, 그 규제 역시 매 우 엄격해지고 있다. 배기가스의 문제는 연소실내에서의 고효율연소에 의해 개선될 수 있으며, 이 를 위해서는 혼합가스 생성장치에서의 잘 미립화된 혼합가스의 생성에 관한 미시적 연구가 필수 적이다. 본 연구에서는 범용 유체 유동해석, 프로그램을 이용하여 Butterfly밸브 주위에서의 공기 의 흐름현상을 예측하였으며, 밸브의 손실계수(Kv)를 실험치와 비교하여 보았다. 또한 압축성과 비압축성 유체 유동해석의 비교, Residual Mass(R. M)의 최적치 정의에 의한 CPU 시간의 최소 화, Numerical Grid Size의 해석결과에 미치는 영향 등에 관해 알아보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.148-151
• /
• 2021

본 논문은 oneM2M을 활용하여 스마트시티의 일환으로 사회적 이슈가 되고 있는 미세먼지(PM10, PM2.5) 측정 플랫폼을 설계하였다. 미세먼지 측정 디바이스를 이동식 차량에 부착하여 미세먼지가 측정이 되고 있지 않은 사각지대까지 범위를 넓혀 측정하였다. 또한 미세먼지뿐만 아니라 일상생활과 연관된 온도, 습도, 대기압, 휘발성 유기화합물(VOC), 일산화탄소(CO), 아황산가스(SO₂), 이산화질소(NO₂), 소음을 센서의 응답 시간에 따라 최소 10초 간격으로 수집하였다. 수집된 정보들은 미세먼지 측정 디바이스 기준으로 반경 1km내 격자모양으로 지형 화면에 실시간으로 표시하고 모니터링함으로서 동작성을 확인하였다.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.17-28
• /
• 2005

About 91.1% of Railway-Highway Crossings (RHC) in Korea use a Constant Distance Warning System(CDWS), while about 8.9% use a Constant Warning Time System(CWTS). The CDWS does not recognize speed differences of approaching trains and provides only waiting times to vehicles and pedestrians based on the highest speed of approaching trains. Under the CDWS, therefore, low speed trains provide unnecessary waiting times at crossings which often generates complains to vehicle drivers and pedestrians and may cause wrong decisions to pass the crossings. The objective of this research is to improve the safety of the RHC by developing accurate a CWTS. In this research a train speed and location detection system was developed with ultra sonic detectors. Locations of the detectors was decided based on the highest speed and the minimum warning time of Saemaul of 160 km/h. To validate the algorithms of the newly developed systems the lab tests were conducted. The results show that the train detection system provides accurate locations of trains and the maximum error between real speeds of trains and those of the system was 0.07m/s.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.181-185
• /
• 2003

the effect if atmosphere is more important in the West sea of Korea than in other seas because of shallow water and heat storage if the water. The serial oceanographic observation data and coastal station data from NFRID, and the atmosphere data from KMA were used in order to find out the relationship between them The highest water temperature, salinity and weather factor were recorded in Aug, and the lowest of them in Feb. As the water deepens, the maximum time leg in water temperature and the minimum time leg in salinity. Water temperature have the maximum in Oct, the minimum in Apr at 75m of the 311-07 station with 100m depth water temperature (WT)-air temperature, WT-precipitation (Preci.) and salinity (Sal)-wind speed (WS) were in direct proportion, but WT-WS, Sal-AT and Sal-Preci in inverse proportion Water temperature and salinity I-ave time leg at the same depth the maximum had more the delay of $2\~4$ months at a depth if 20 meters than at the surface in all stations except for salinity at 307-05.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.271-277
• /
• 2017

As a result of rapid industrialization, air pollutants are seriously threatening the health of the people, the forecast is becoming more and more important. In forecasting air quality, it is very important to create a reliable initial field because the initial field input to the air quality forecasting model affects the accuracy of the forecast. There are several methods for enhancing the initial field input. One of the necessary techniques is data assimilation. The number of operations and the time required for such data assimilation is exponentially increased as the forecasting area is widened and the number of observation sites increases. Therefore, as the forecast size increases, it is difficult to apply the existing sequential processing method to a field requiring fast processing speed. In this paper, we propose a method that can process Cresman's method, which is one of the data assimilation techniques, in real time using CUDA. As a result, the proposed parallel processing method using CUDA improved at least 35 times faster than the conventional sequential method and other parallel processing methods.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.965-970
• /
• 2023

Wind profiler and wind lidar produce a vertical profile of winds in high spatiotemporal resolution in the atmospheric boundary layer. The wind lidar makes the wind vector using DBS (Doppler Beam Swinging) and VAD (Velocity Azimuth Display) methods. The DBS method has the advantage of obtaining a wind profile with a fast scan time. On the other hand, there is a restriction that requires at least two beams including vertical beam, which causes a decrease in the data acquisition rate. The VAD method was improved to produce more wind vector of the wind profiler as well as the wind lidar, which generally uses 5 beams. Fourier series was estimated with the radial velocity by the DBS method and wind vector was determined by setting the azimuth interval and applying the radial velocity by the Fourier series to the VAD method. The wind vectors were retrieved at the altitude where the wind was not calculated by the DBS method, and the results of the two methods were consistent.