• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.34-35
• /
• 2018

낙동강 하류역은 최근의 퇴적우세 지형변화와 더불어, 기후변화에 따른 태풍강도 강화 등으로 인한 해일고 증가가 우려된다. 따라서, 과거 태풍자료를 수집 분석한 후 연구지역에 가장 큰 영향을 미친 태풍을 모델 태풍으로 선정하여 낙동강 하류역에 위치한 주요지점별 폭풍해일고 변화를 파악하였다. 실험결과, 최대 폭풍해일고는 태풍 매미 내습시에 나타났으며, 하단 매립지 전면에서 1.1~1.5m, 명지주거단지 전면에서 1.2~1.3m, 녹산국가산업단지 전면에서 1.3~1.5m로 하단 매립지 전면이 가장 크게 나타났다. 향후, 과거 지형변화를 고려한 폭풍해일고 검토를 통하여 최근의 급격한 지형변화로 인한 영향을 파악한 대비를 해야 할 것으로 사료된다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.729-732
• /
• 2010

본 논문에서는 이산 변수 최적화에 적합한 유전 알고리듬을 이용하여 복합재 적층 패치의 최적강도설계를 수행하였다. 기저판(substrate)와 접착제(adhesive), 그리고 복합재 적층 패치로 이루어진 구조물에서 패치의 강도를 효율적으로 구하기 위해서 응력 함수 기반의 해석적 방법을 도입하였다. 면외 방향의 응력 함수를 가정하여 가상 공액일의 법칙(complementary virtual work principle)에 적용하였으며, 복합재 패치의 자유 경계조건으로부터 면내 방향의 응력함수를 결정하였다. 응력 함수를 통하여 구한 층간 응력 값은 자유 경계 효과를 잘 나타내었고, 이를 이용하여 패치의 강도 해석을 수행하였다. 강도 해석 시, 복합재 패치의 파괴 기준은 면내 응력들에 대해서는 최대 응력 척도를 사용하였으며, 층간 응력들에 대해서는 quadratic delamination 척도를 사용하였다. 유전 알고리듬을 이용한 최적강도설계 과정에서는 임의의 염색체가 주어진 적층 구속 조건을 만족할 수 있게 수정(repairing)하는 과정을 도입하였다. 또한 다수의 전역해(global optima)를 효과적으로 찾기 위해서 multiple elitism 기법을 도입하였다. 응력 함수 기반의 강도 해석방법과 유전 알고리듬과의 연계를 통한 복합재 적층 패치의 강도최적설계 기법은 패치 구조물의 해석 및 설계에 있어서 효율적인 도구로서 사용할 수 있을 것이라 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.404-404
• /
• 2018

본 연구는 홍수조절을 위한 댐의 역할과 홍수조절의 크기가 하류에 미치는 영향범위에 대해 조사하였다. 연구지역으로 낙동강을 중심으로 연구를 진행하였고 기존연구(남한강 유역)와의 비교를 통해 댐의 홍수조절 능력의 공간적 영향 범위에 대한 분석을 실시하였다. 낙동강 유역과 남한강 유역의 홍수사상은 각각 1997년부터 2010년까지의 31개의 홍수사상과 2000년부터 2010년까지의 18개의 홍수사상을 활용하였다. 남한강 유역은 횡성댐(2000년 완공)의 영향을 포함하여 분석하기 위해 2000년부터의 홍수사상을 선정하였다. 낙동강 유역은 안동댐과 임하댐의 영향을 남한강 유역은 충주댐과 횡성댐의 영향을 분석하였다. 홍수조절의 양을 분석하기 위해 홍수최대 유출치 (Peak Discharge)와 홍수유출량(Volume)을 분석하였다. 댐 자체의 홍수조절 능력을 보면 댐의 상시방류량을 넘어 조절하는 하는 경우는 남한강 댐의 경우는 종종 발생하나 낙동강내의 댐의 경우는 자주 발생하지 않는 것으로 파악됐다. 댐의 홍수조절 능력의 경우 댐의 크기와 유역의 크기를 비교분석하여 댐이 영향이 미치는 범위를 추정하였다. 댐의 영향(홍수저감율)이 10 %미만으로 조정되는 거리는 한강유역의 경우는 댐 상류의 면적의 7배에 해당하는 유역이었으나 낙동강 유역의 경우는 8.5배에 해당하는 유역면적에서 같은 영향을 나타냈다. 이는 자료의 양과 조건의 영향으로 파악된다.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.3
• /
• pp.5-14
• /
• 2017

Experimental study on strength characteristics of frozen soils is necessary for the safety evaluation of design and construction in cold region. The objective of this study is to evaluate the direct shear strength of frozen soils obtained from traditional system (Type-1), system with roller on the upper shear box (Type-2), and system with fixed upper shear box separated from bottom shear box (Type-3). Specimens mixed with sand, silt, and water are frozen to $-5^{\circ}C$, and then direct shear tests are conducted under the normal stress of 5, 10, 25, and 50 kPa. Experimental results show that the upper shear box of Type-1 touches the bottom shear box due to the rotation of the upper shear box. The shear strength obtained from Type-2 is overestimated because the preventing rotation force is added to shear force. Type-3 may acquire the only strength of the specimen, and shear strain at peak shear strength is similar to that at the beginning of vertical displacement occurrence. In addition, internal friction angle and cohesion at both peak and residual stresses in Type-3 are smaller than those of Type-2. This study shows that high strength specimens including frozen soils can be effectively evaluated using improved shear box system such as Type-3.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.143-153
• /
• 2002

The bonded orthodontic retainer constructed from composite and multistrand orthodontic wire provides an esthetic and efficient system for maintained retention. This study was designed to measure shear bond strength of bonded retainers and to suggest a optimal combination of a multistrand wire and bonding method used when bonded retainer was fabricated. 160 sound maxillary and mandibular premolars were used for 80 test samples. After Uniformizing bonding area, length of wire, and thickness of composite, multistrand wire was bonded to fabricated a bonded retainer by direct or indirect bonding method. Shear bond strength and extension length of each sample were measured by a universal testing machine. The results of this study were as follows : 1. In vitro shear bond testing found 6-stranded, 0.0155 inch wires to have the largest shear bond strength and 3-stranded, 0.0195 inch wires to have the least shear bond strength. But, These difference was not statistically significant(p<0.05). 2. In vitro extension testing found 3-stranded, 0.0155 inch wires to have the largest extension length and 3-stranded, 0.0195 inch wires to have the least extension length(p<0.05). The larger diameter wire was used, the larger extension length was shown. But, the strand of wire is not related to the extension length of wire. 3. In comparison with direct bonding method, larger shear bond strength and extension length was shown in indirect bonding method(p<0.05).

• Composites Research
• /
• v.24 no.4
• /
• pp.11-16
• /
• 2011

Retention of interfacial shear strength (IFSS) of polymer composites at cryogenic temperature application is very important. In this work, single carbon tiber reinforced epoxy compositc was used to evaluate IFSS and apparent modulus under room and cryogenic temperatures. The property change of carbon and selected epoxy for particularly cryogenic temperature application were tested in tension and compression. Tensile strength and elongation of carbon fiber decreased at cryogenic temperature, whereas tensile modulus was almost same. On the other hand, epoxy matrix showed the increased tensile strength but decreased elongation. It can be due to maximum thermal contraction existing free volume in cryogenic temperature. IFSS increased up to $-10^{\circ}C$ and then decreased steadily. However, IFSS at cryogenic temperature was still similar to that at room temperature. This result is very useful to cryogenic application since selected epoxy toughness and interfacial adhesion can keep at such low temperature.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.58-63
• /
• 2015

Several researches on cement zero concrete using alkali-activators have been conducted to investigate its fundamental material properties such as slump, strength and durability, however, research on the structural behavior of relevant members involving the elastic modulus, stress-strain relationship is essential for the application of this cement zero concrete to structural members. In this paper the shear behavior of reinforced concrete beams using 50 MPa-alkali activated slag concrete was experimentally evaluated. To achieve such a goal, six reinforced concrete beam specimens were fabricated and their shear behaviors were observed. The maximum difference between test results and analysis results in crack shear stress for beam specimens without stirrups is 31%, while that for beam specimens with stirrup is 15%. Furthermore, it is also found that the shear strength of alkali activated slag concrete is by 22~57% greater than the nominal shear strength calculated by design code, implying that shear design equations would provide conservative results on the safety side.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1591-1597
• /
• 2012

Adherend samples were made from unsaturated polyester and woven and mat glass fibers by the hand layup and vacuum methods. The mechanical properties of the adhesive, composite adherends, and terminal-joint and secondary-joint specimens were determined experimentally. Combinations of the experiment results and the bonding theory were used in this study. The maximum and average shear stresses were calculated based on the maximum tensile force and geometry parameters of the joint specimens. The results of the maximum and average shear stresses were compared and evaluated for six joints. The results showed that the grinding and grind/acetone joint had the highest strength among three types of terminal-joints. Similarly, the mat-mat and mat-woven joints had the highest strength among three types of secondary-joints with the same value. Conversely, no treatment and woven-woven bonding had very low strength. In each case, failure occurred always at two ends and then moved toward the middle area of the overlap length.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.324-328
• /
• 1995

The changes in the rheological properties of soybean curd upon the processing conditions were measured by the failure test, and analyzed by the stress-relaxation data. Soybean curd coagulated with $CaCl_2$ showed a higher failure stress value than other coagulants such as $MgCl_2,\;CaSO_4\;and\;Glucono-{\delta}-lactone$ (GDL), whereas addition of 0.3% $CaCl_2$ produced higher failure stress value than other concentrations $0.2{\sim}0.6%)$. Also, maximum failure stress of soybean curd was shown at the higher heating temperatures$(95^{\circ}C)$ and greater molding pressures, respectively. Initial and equilibrium stress at the stress relaxation curves showed the same tendency as those of failure test, and magnitude of elastic elements$(E_0,\;E_e)$ and viscous element$({\eta})$ were numerically expressed through simple Maxwell model analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.109-115
• /
• 2015

High performance fiber reinforced cementitious composite (HPFRCC) can provide high fracture energy absorption as well as high strength with high fiber volume fraction. The increased fracture energy helps resisting high frequency loadings, such as earthquake, impact or blast. This study investigates the flexural performance of slurry infiltrated fiber concrete (SIFCON), one of the important HPFRCC, with respect to varying fiber volume fraction. The maximum fiber volume fraction was 8.0 % and reduced to 6.0% by 0.5% and the maximum volume fraction is obtained by packing fibers with simple tapping by hands. The used fiber was a steel fiber with the length 30 mm and the diameter of 0.5 mm. The flexural strengths were 48.7 MPa at 8.0 % and 22.8 MPa at 6.0 %. The measured flexural strength is much higher compared to other cememtitious composite materials but decreased proportional to the fractions. This result implies that for SIFCON considered herein the reduced amount of steel fibers may affect its flexural performance in a negatively way. The flexural toughness, an index to represent the fracture energy absorption, also decreased with the reduced fiber amount.