• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.8-17
• /
• 1999

In this paper, a proposal for improving the performance of IF in-phase combiner is presented in view of simple hardware design and good performance for space diversity application. By adding the stable normalization circuit to the phase detector, better performances are obtained even for a severe notch depth of 30 dB. To check the validity of this proposal, various results based upon numerical simulation and laboratory test are presented here in conjunction with 64-QAM digital radio relay system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.162-170
• /
• 1984

대부분의 동적댐퍼들은 주구조물의 진동진폭을 정해진 주파수 변위내에서 최대로 줄이는 것을 목 표로 한다. 그러나 공작기계의 안정성은 시편과 공구사이의 상대변위와 절삭력에 의해 결정되는 전달함수의 최대크기에 의해서보다는 실수부분의 최소치에 의해 결정된다는 것이 잘 알려져 있 다. 본 논문에서는 이 사실에 착안하여 공작기계에서 발생하는 채터를 흡수하기 위한 최적의 댐 퍼를 설계하는 절차를 제시하고 1 자유도로 대표될 수 있는 구조물의 경우에 대하여 구체적인 방 법을 예시하였다. 종래의 최적 댐퍼의 성질을 구하는 방법에 비해 수학적인 절차가 약간 복잡해 지기는 하나 전산기를 이용하여 큰 어려움이 없이 최적의 설계자료를 얻을 수 있다. 댐퍼 질량이 정해졌을 때 감쇠율과 스프링 계수를 변수로 하는 목표함수가 하나의 식으로 유도될 수 없기 때 문 에 간단한 최적화 방법으로 이변수 황금분할법을 사용하였다. 수치적인 예를 통하여 종래의 다른 방법에 의한 결과와 비교하고 제안된 방법론의 타당성을 입증하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.95-98
• /
• 1998

본 논문에서는 코퍼스 기반 음성합성시 각 음성 세그머트의 에너지 정규화가 합성된 음성의 음질에 미치는 영향에 대하여 연구한다. 음성합성에 사용되는 음성 세그먼트를 실제 자연 음성 데이터로부터 추출된 것으로 다양한 발음세기를 가진다. 따라서 이들을 조합하여 만든 합성음성의 음질은 일반적으로 음량이 고르지 못하고 듣기에 부자연스럽다. 이러한 문제를 해결하기 위해 음성합성시 음성 세그먼트의 에너지를 정규화하는 방법을 제안하고 정규화방법으로 최대진폭 정규화방식을 사용하였다. 녹음환경이 비교적 일정한 코퍼스와 그렇지 않은 환경에서 녹음된 코퍼스를 사용하여 정규화 없이 합성한 음성의 음질과 정규화를 거쳐서 합성한 음성의 음질을 비교한다. 실험결과 음성 세그먼트의 에너지를 정규화한 경우 합성음성의 음질이 개선되었다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.103-109
• /
• 2002

본 연구에서는 가상현실사용자들이 모션베이스를 사용함에 따라 가상현실에 대한 평가가 어떻게 달라지는지를 조사하였다. 33명의 피험자를 대상으로 모션베이스 평가설문과 자기보고를 통해 가상현실에서의 현실감, 재미, 멀미감을 조사하고 가상주행 전, 중, 후에 내장근전위, 피부전도도, 말초체온, 말초혈류량, 심박률, 눈 깜박임의 생리신호를 측정, 분석함으로써 모션베이스 유무에 따른 심리·생리적인 변수들에서의 차이를 알아보았다. 모든 피험자는 2주 간격으로 모션베이스 사용조건과 모션베이스를 사용하지 않는 조건에서 두 번 가상현실을 경험하였다. 가상현실에 대한 현실감, 재미항목에서 모두 모션베이스를 사용한 조건이 높은 점수를 나타냈다. 또한 모션베이스를 사용한 조건에서 멀미보고수가 감소하는 경향이 나타났다. Tachyarrythmia의 상대파워 변화량과 PPG 최대진폭의 평균변화량 비교는 모션베이스를 사용한 가상현실 조건이 생리적인 요동을 적게 일으키는 것으로 나타났다. 이러한 결과들은 시각제시기와 동기화된 모션베이스를 도입함으로써, 가상현실에 대한 현실감은 높이면서 멀미감은 줄일 수 있다는 가능성을 보여준다.

• Physical Therapy Korea
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1997

Skeletal muscle fatigue is often associated with diminished athletic performance and inability to maintain an expected force output as a function of time. The purpose of this study was to compare the effect of duration of exercise on skeletal muscle fatigue between Weight Lifters(WL) and Non-Weight Lifters(NWL). There were twelve normal healthy adult volunteers, ranging in age from 18 to 35 years. The group consisted of six NWL and six WL. Randomized cross-over design was set up and work-rest cycle was 8 minutes work and 1 minute rest based on 15% MVC. Muscle fatigue was measured by the amount of force produced by the wrist flexor muscle and EMG amplitude over time. Repeated measures ANOVAs($2{\times}4$) were used to determine two types of subjects(WL, NWL) during four different duration of exercises(16, 32, 48, 64 minutes). The force decreased over time in NWL and WL, but there was no significant difference(F=2.83, p>0.05). However, the EMG amplitude increased in WL(0.8200) and NWL(0.6348). The WL exhibited an increase in EMG at the end of the period, especially at 48 minutes of exercises than did the NWL(F=9.58, p<.05). This suggests the WL were able to adjust to prolonged effort with adaptations in neural effect over time, resulting in higher EMG amplitude. That is, WL may be able to learn to recruit more motor units with training. It is important to the degree of neuromuscular fatigue and the time needed for recovery may differ considerably between WL and NWL, there is a need to plan proper strength training or rehabilitation protocols to match with the requirements in different characteristics of groups.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2149-2156
• /
• 2011

In this paper, design of a new 3-dimensional (3-D) 16-ary signal constellation with constant envelope is presented and analyzed. Unlike the conventional 16-ary constellations, all signal points of the new constellation are uniformly located on the surface of a sphere so that they have a unique amplitude level and a symmetrical structure. When average power of the constellations is normalized, the presented 16-ary constellation has around 11.4% increased minimum Euclidean distance (MED) as compared to the conventional ones that have non-constant envelope. As a result, a digital communication system which exploits the presented constellation has 1.2dB improved symbol error rate (SER). While signal points of the conventional constant-envelope constellation are not distributed uniformly on the surface of a sphere, those of the proposed constellation has a completely symmetric distribution. In addition, the new signal constellation has much lower computational complexity for practical implementation than the conventional one. Hence, the proposed 3-D 16-ary signal constellation is appropriate for the application to a communication system which strongly requires a constant-envelope characteristic.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.891-897
• /
• 2013

In this study, the compressive deformation behaviors of aluminum alloy under high strain rates were investigated by means of a SHPB test. An acoustic emission (AE) technique was also employed to monitor the signals detected from the deformation during the entire impact by using an AE sensor connected to the specimen with a waveguide in real time. AE signals were analyzed in terms of AE amplitude, AE energy and peak frequency. The impacted specimen surface and side area were observed after the test to identify the particular features in the AE signal corresponding to the specific types of damage mechanisms. As the strain increased, the AE amplitude and AE energy increased whereas the AE peak frequency decreased. It was elucidated that each AE signal was closely associated with the specific damage mechanism in the material.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.632-639
• /
• 2011

In order to design a wave energy generate system, a 6-Degree of freedom motion analysis technique was applied to the three-Dimensional CFD analysis on two floating body and the behavior was interpreted according to the nature of the incoming wave. The waves are generated by the same type of wave in the model of tank using the piston type, but due to the shallow water that is generated from the bottom of the wave energy is attenuated by Ekman boundary layer. According to the wavelength of waves generated by the result of evaluating the behavior of floating body, it is concluded that 0.3m is the maximum amplitude of wavelength of 5m, and 0.15m is the minimum amplitude of wavelength of 1m. 1.06m is the maximum distance between the two floaters of wavelength of 6m.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.13-20
• /
• 2001

The active noise cancellation system offers a better low frequency performance with a smaller and lighter system compared to a passive one. This paper presents an active noise control system capable of reducing the noise in a helmet after attenuating the external noise using the helmet as the passive noise reduction system, which consists of a controller for inverting and compensating the phase delay, a microphone for picking up the external noise, and a loudspeaker for radiating the acoustic anti-phase signal to reduce the external noise. In this paper, external noise can be reduced by noise controller by compensating the phase difference to be 180°in the frequency of maximun value in the amplitude response. The noise of the phase delay covered from 50°to 310°was reduced in this system and it is possible to obtain a noise reduction of up to approximately 20 dB at the ears in the enclosure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.268-274
• /
• 2004

Patch type piezo-polymer sensors for smart structures were experimented to detect elastic wave. The pencil lead braking test was performed to analyze the characteristics of patch-type piezo-polymer sensors such as polyvinyliden fluoride (PVDF) and polyvinylidene fluoride trifluorethylene (P(VDF-TrFE)) for several test specimens with various elastic wave velocities and acoustical impedances. The characteristics of the patch-type piezo-polymer sensor were compared with the commercial PZT acoustic emission (AE) sensor. The vacuum grease and epoxy resin were used as a couplant for the acoustic impedance matching between the sensor and specimen. The peak amplitude of elastic wave increased as the diameter of piezo-film and acoustical impedance of the specimen increased. The frequency detection range of the piezo-film sensors decreased with increasing diameter of the piezo-film sensor. The P(VDF-TrFE) sensor was more sensitive than the PVDF sensor.