• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.341-349
• /
• 2012

Recently, as structures in Korea and other countries become much taller, larger, and more specialized, concrete used for constructions of these structures is required to have high performance characteristics. Especially, seismic performance of concrete must be improved to resist cyclic loading from earthquakes. Consequently, this study was performed to focus on developing optimal mixtures of high ductile fiber reinforced mortar with high ductility and durability, which have good serviceability, stability and reliability performances. Eventually, this material is expected to improve seismic performance of concrete structures such as load carrying capacity, ductility capacity, and energy dissipation capacity when applied to critical regions of flat plate slab-column joint. Ultimately, this research is intended to develop a material for basic designs and practical constructions of reinforced concrete structures. Test results showed that the maximum load carrying capacity, the ductility capacity, and the energy dissipation capacity of the test specimens titled RCFPP series were increased by 15%~34%, by 33%~37%, and by 2.14 times, respectively, compared to those of the standard specimen titled SRCFP.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.47-60
• /
• 2010

This study is focused on the analysis of tunnel behavior to estimate the stability on tunnel design. An estimation method was proposed as a hybrid consideration, which contains the displacement analysis by 3D numerical simulation, the maximum displacement obtained after field measurement, and an assessment of tunnel stability using a deformation analysis proposed by Sakurai(1988, 1997). The points of case study by Sakurai(1988, 1997) were replotted considering his analysis. From the new analysis of the tunnel case study, the trend line for analyzed points is analogized, which curve is divided into stable, unstable and failure zone. To evaluate the estimation method, a special shape of railway tunnel was selected, which are the Inchon international airport rail way connected to subway line 9 in Gimpo, Korea. The point s of upper and below track on the Inchon international airport rail way were satisfied to the stability of tunnel after reinforcing. Also the points shows the higher apparent Young's modulus, which resulted from improvement on shear strength by the micro silica grouting and the supporting of umbrella method. Therefore, if new analysis used, proper tunnel reinforcing method could be selected according to tunnel strain and geological property.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.97-97
• /
• 2012

반도체 및 디스플레이 공정등에서 고진공 및 급 배기 환경을 제공하기 위하여 사용되는 터보분자펌프 (Turbomolecular Pump, TMP)는 다층의 회전깃을 갖는 로터를 회전시켜 분자를 배출시키는 방식을 사용하는 진공펌프이다. 또한 최근에는 디스플레이 및 반도체 공정에서 높은 진공도뿐만 아니라, 높은 배기속도를 요구하는 추세에 따라, 터보 펌프와 드래그 펌프부분을 동시에 가지고 있어 상대적으로 작동 진공도 영역이 넓은 복합 분자펌프(Compound Turbomolecular Pump, CMP)의 활용도가 넓어지고 있다. 이러한 분자펌프가 장시간의 고속회전에 적합하고, 베어링에서의 오염을 없앨 수 있는 비접촉 방식인 자기부상 방식이 주로 적용된다. 자기베어링 시스템은 하드웨어와 소프트웨어로 나누어질 수 있는데, 하드웨어는 회전하게 되는 블레이드 로터 및 자기베어링 로터, 모터 로터 등이 포함된 축과 고정되어 있는 자기베어링 코어와 코일, 변위센서 등의 펌프 하우징 부분, 또한 이를 제어하기 위한 전력 증폭 시스템 등의 기전적인 요소들이 이루어져 있다. 소프트웨어라 할 수 있는 제어시스템에 있어서 자기 베어링이 불안정한 특성을 갖는 개루프계를 갖고 있으므로 안정화를 위한 능동제어 시스템이 필수적이며 진동제어 등의 기능을 갖도록 적용된다. 따라서 이러한 복합분자펌프의 성능은 이러한 시스템을 구성하는 개별 요소의 성능과 이를 통합한 제어시스템의 성능이 결정한다고 할 수 있다. 본 논문에서는 현재 개발중인 2,500 l/s급의 자기부상형 고진공 복합분자펌프의 시작품에 대하여 고속회전의 안정성에 대한 연구를 수행한 내용을 보고하고 있다. 디지털 제어시스템을 적용한 시작품의 최대 26,000 rpm까지의 고속회전시의 회전 응답 및 진동 특성을 측정 분석하였으며, 로터의 고유진동수 및 진동 모우드를 분석하였다. 또한 연속 작동시의 발열특성과 각 부분의 온도와 회전 안정성과의 관계를 평가하였다.

• Composites Research
• /
• v.16 no.4
• /
• pp.44-50
• /
• 2003

The damage zone around a crack tip occurring before the fracture is a significant domain. which affects the toughening mechanism of materials. In this study. the growth process of damage zone in the vicinity of crack tip for rubber-modified epoxy resin is investigated using an acoustic emission(AE) analysis. The weight fractions of rubber(CTBN 1300$\times$B) in rubber-modified epoxy resin are 5 wt% and 15 wt%. The fracture toughness($K_{IC}$) and the fracture energy($G_{IC}$) were measured using 3 point bending single-edge notched specimens. The damage zone and rubber particles distributed around the crack tip were observed by a polarized optical microscope and an atomic force microscope(AFM). The damage zone around crack tip of rubber-modified epoxy resin was formed at 13 % loading and developed until 57 % loading of the fracture load. The crack initiated at 57 % loading grew repeatedly in the stick-slip propagation behavior. Based on time-frequency analysis, it was confirmed that AE signals with frequency bands of 0.15~0.20 MHz and 0.20~0.30 MHz were generated from cavitation and stable/unstable cracking inside the damage zone.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.571-579
• /
• 2014

The steel braces are used to control the lateral drift of high rise buildings. The braces are designed as tensile members since the braces consisted of slender member can not resist compressive loads by elastic buckling. To resolve this problem, a lot of research were performed to develop the non-buckling member. The force limiting device (FLD.) is one of them. The purpose of this study is the development of FLD. to prevent a elastic buckling for a slender member. The folded plate type is proposed to induce the yielding before occurring elastic buckling. In this study, member test and FEM analysis for proposed type were performed. Further, It is verified that the structure with FLD member is stable by high energy absorption. The proposed folded plate type FLD could be effective to preserve the compressive member from the elastic buckling.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2015

This paper describes the development of force limiting device(FLD). The FLD could induce compressive yield before occurring elastic buckling for slender member under compressive load. Therefore, it might prevent reduction of load carrying capacity by elastic buckling and the structures with the devices would behave stable. A new type of FLD reduced cross area is proposed in this study different to existing studies like as out of plane type, slit type and folded plate type. The parameters of specimens are depth, width and number of cutting. The structural capacity and characteristics of proposed types were verified by experiment and FEM analysis. The FLD of cutting type is efficient in compressive member.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.5
• /
• pp.487-495
• /
• 2014

In this study, in order to suggest the design method for supports in the room-and-pillar underground structure, the case study was carried out. In the case study, shape of rock pillar and room was mainly considered. From the analysis, a displacement at the roof, the maximum principle stress and plastic state were examined. To optimize variables in the case study, cases from the Seoul metro station were analyzed, then a target depth of the underground structure and ground conditions were determined. And the height of rock pillar and room were chosen from the assumed purpose of underground space, i.e. living/office and warehouse. Total cases of analysis was 180 cases including 3 types of ground condition, 5 types of rock pillar and 6 types of roof span. It is expected that results from analysis can be used to determine the installation of support in room-and-pillar underground structure with stability, utilization efficiency of underground space and applicability of vehicles.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.179-189
• /
• 2012

The aim of this paper is to research the change in the turbulent flow and the AOA(Angle Of Attack) occurred by $40^{\circ}$ crosswind to the direction of runway through the three-dimensional numerical analysis and to predict the take-off and landing flight stability. As a result, the maximum amplitude of AOA variation on runway reached $2^{\circ}$ within 3 second because of the wake formed by the constructions in the vicinity of the airport, and the overall effects appeared as an irregular aperiodic forms. Additionally, it was observed that the layout and shape of the buildings effected on the strength of turbulence directly, and the rapid flow generated between the buildings changed into stronger wake and eventually expected that the flow raises serious take-off and landing flight instability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.17-24
• /
• 2020

This study examined the spectral information and reflectance of cracks of an embankment with drone-based hyperspectral imagery for crack detection. A Nano-Hyperspec mounted on a drone was used as a sensor, and hyperspectral videos of different intensities of illumination of the cracks on the embankment located in the downstream of Andong-Dam were obtained. An analysis of the data value of the illumination and peak data-value, the coefficients of determination were calculated to be 0.9864 of the uncracked areas and 0.9851 of the cracked area. The reflectance of each area showed a similar value and pattern, regardless of the intensity of illumination. This result may have occurred because the reference values of the white reference as the calculation criteria of reflectance varied according to the intensity of illumination. The reflectance at the cracked area was 5.65% lower in visible light and 4.58% lower in near-infrared light than that at the uncracked area. The detection of cracks may offer more precise results in further studies when the gimbal direction and camera angles of the drone are calibrated. Because hyperspectral imagery enables the detection of crack depths and types of clay minerals, which are difficult to identify in general RGB imagery, it can serve as a preemptive measure for evaluating the embankment stability.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.556-559
• /
• 2007

고탁수 장기화 문제를 해결하기 위한 방법으로는 고탁수층을 선택취수하여 우선 배제함으로써 하류하천의 고탁수 발생일수를 최소화하는 방법이 있는데, 이와 같은 선택적 취수기법은 저수지 운영에 있어서 고탁수층을 우선 배제한 후 홍수기 이후에 저수지내로 유입되는 청수를 담수하여 호소 내 탁도 저감 효과를 얻을 수 있다. 본 연구에서는 선택취수 시 성층수괴의 동수역학적 변화를 분석하기 위하여 국내에서 처음으로 Two-tank 기법을 이용하여 성층구조를 구현해 내었는데, 소금물의 밀도변화를 이용하여 수심 1m의 성층수조를 만들었고, 밀도경사가 상이한 성층구조에서 취수조건을 변화시키면서 비교란 유속계인 PIV 시스템을 이용해 유속의 흐름을 Vector와 Contour로 분석하였다. 선택취수에 대한 흐름의 동수역학적 분석결과 취수유량보다는 밀도성층경사 변화에 더 민감한 반응을 보였다. 취수유량을 줄이거나 밀도성층경사를 급하게 했을 때에는 선택취수 영역(withdrawal zone)의 수직방향 폭은 줄어드는 반면, X축으로의 영향범위는 증가함을 나타냈다. 취수유량을 증가시키거나 성층밀도경사를 완만히 했을 땐 선택취수 영역(withdrawal zone)의 수직방향 폭은 증가하였고 X축으로의 영향범위는 축소됨을 나타내었다. 이 결과는 Richardson 수로도 판단되어지는데, Richardson 수가 증가하면 유속에 비해 상대적으로 밀도성층경사가 크다는 것인데 이럴 경우 선택취수 영역(withdrawal zone)의 수직방향 폭 최대가 되고 선택취수 영역(withdrawal zone)의 수직방향 폭은 최소가 된다. 선택취수 영역(withdrawal zone)의 수직방향 폭이 최소가 되면 취수구 직경 D의 1.8배의 값을 가지고 Richradson 수가 최소가 되더라도 취수구 직경 D의 3.3배를 벗어나지 않는다는 결과를 도출할 수 있었다.링 목적으로 사용될 수 있다. 본 연구에서 개발한 영상수위계는 한강홍수통제소 관할의 전류, 청담대교 등 4개소 낙동강 홍수통제소 2개소, 지자체 등에 적용되었으며, 적용 결과 비교적 안정적이면서 정확하게 수위를 측정하는 것으로 나타났다. 한편 기존 CCD 카메라 이외에 CCTV를 이용한 영상수위계를 개발하여 영상의 화질 개선뿐 아니라 하천화상 감시 기능을 강화하였다.소류의 섭취율은 높았다. 집단간의 상관도를 보면 교육별로 김치, 장아찌, 콩이 각각 p>0.5 수준에서 유의한 차가 없었고, 나머지는 유의한 차가 있었다. 연령별로는 멸치가 유의한 차가 없었고(p>0.5), 수입별로는 콩이 유의한 차가 없었다(p>0.5). 4. 영양지식(營養知識) 검토 가정생활(家庭生活)에 필요(必要)한 일반적(一般的)인 영양지식(營養知識)은 대체적으로 낮은 편이었다. 어린이 영양, 편식의 해로움, 비만증의 해로움, 임신부 그리고 수유부 영양에 대하여는 일반적으로 알고 있다고 하였으며, 그다음으로 이유기 영양, 어린이 발육에 필요한 식품, 식품과 영양소와의 관계, 우유의 성분, 노인영양에 대하여 잘 알고 있는 비율이 낮았으며, 인체의 영양소, 식단작성여부, 간식의 이론, 식품감별법에 대하여는 가장 낮은 비율을 나타냈다. 각 영양지식은 교육정도가 높을수록 영양지식이 높았고, 교육별 집단간의 유의한 차가 나타났다. (0.001