• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.612-620
• /
• 2016

Aqueous mineral carbonation process, in which $CO_2$ is captured through the reaction with aqueous calcium oxide (CaO) solution, is one of CCU technology enabling the stable sequestration of $CO_2$ as well as economic value creation from its products. In order to enhance the carbon capture efficiency, it is required to maximize the dissolution rate of solid reactants, CaO. For this purpose, the proper design of a reactor, which can achieve the uniform distribution of solid reactants throughout the whole reactor, is essential. In this paper, the effect of internal reactor designs on the solid dispersion quality is studied by using CFD (computational fluid dynamics) techniques for the pilot-scale reactor which can handle 40 ton of $CO_2$ per day. Various combination cases consisting of different internal design variables, such as types, numbers, diameters, clearances and speed of impellers and length and width of baffles are analyzed for the stirred tank reactor with a fixed tank geometry. By conducting sensitivity analysis, we could distinguish critical variables and their impacts on solid distribution. At the same time, the reactor design which can produce solid distribution profile with a standard deviation value of 0.001 is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1342-1354
• /
• 2016

As Internet, and hardware technology are in rapid process, using rate and penetration rate of Internet of Things are increasing. Internet of Things is the physical objects with network which embedded with electronics, software, sensors, and network. Smart Home-kit to operate refrigerators, washing machines, light bulbs, and such internet of things by a smartphone has been realized. However, it is difficult to use a good quality of software based on IoT. It is because that the study related to quality evaluation of software based on IoT is deficient compared with increase amount of IoT devices. Software based on IoT includes mobility, transportability, real time accessibility and hardware characteristics. Therefore, it is necessary to have differentiated quality standards and quality model. Software quality evaluation model for IoT is proposed to satisfy these needs. Evaluation model is mapped by characteristics of IoT software based on ISO/IEC 25000's quality characteristics. Scenario based studies were applied to quality model for verification.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.100-100
• /
• 2017

2016년부터 중국에 수출한 진공포장 쌀이 진공이 풀려 중국 현지 소비자들에게 품질에 대한 신뢰저하로 외면 받아 판매에 어려움을 겪었다. 진공풀림 원인은 주로 포장재의 모양, 과열 열접착 및 운송 중 부주의 등을 들 수가 있다. 따라서 본 연구에서는 쌀 진공포장 후 진공 풀림현상이 발생되는 원인을 분석하고, 진공포장에 적절한 포장재 및 취급조건에 대해 구명하여, 중국 쌀 수출 시 품질신뢰도 및 경쟁력 제고로 쌀 수출 확대를 위해 진공 포장재, 진공포장기술 및 운송 취급 방법을 제시하고자 하였다. 미곡종합처리장에서 사용하고 있는 플라스틱 필름 포장재의 적합 여부를 살펴보기 위하여 산소투과도 및 투습도를 산소투과도 측정장치(OX-Tran Model 2/61, Mocon, USA), 투습도 측정장치(Permatran-W Model 3/33, Mocon, USA)를 이용하여 측정하였다. 적정 열접착 온도를 구명하기 위하여 열접착 작업시간 간격 3, 5, 10초 3수준으로 하고 가열시간을 0.2초~2초까지 9수준으로 설정하여 포장필름을 열접착한 후 접착상태를 조사하였다. 진공 포장된 쌀을 골판지상자에 2차 포장하여 운송할 때 진공풀림 현상이 발생 여부를 조사하기 위해 가상 운송시험을 진동시험 장치를 이용하여 수직 및 수평으로 진동시험을 수행하였으며, 또한 취급조건에 따라 진공풀림을 조사하기 위하여 골판지 상자단위, 비닐포장 단위로 50, 70, 90cm 높이에서 낙하 시험을 하고 진공풀림여부를 조사하였다. 유통 중인 쌀 진공 포장재는 나이론(nylon)+선형저밀도폴리에틸렌(LLDPE) 복합필름으로 산소투과도가 $30{\sim}70cc/m^2{\cdot}day$, 투습도가 $2{\sim}4.5g/m^2{\cdot}day$로 산소투과도 및 투습도가 충분히 낮아 진공포장재로 적합했으며, 적정 열접착온도 조건은 $130{\sim}150^{\circ}C$에서 1~1.5초가량 가열해야 되는 것으로 조사되었다. 진동시험 및 낙하시험결과, 골판지박스 포장 시 완충재를 사이에 넣은 경우 진골풀림이 적었고, 상자단위나 비닐포장단위 모두 가능한 50cm보다 높은 곳에서 낙하충격을 받지 않도록 취급해야 할 것으로 판단되었다.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.867-870
• /
• 2001

All-trans-retinoic acid (RA) plays essential roles in the regulation of differentiation and proliferation. It has been proved that RA is effective in the treatments of epithelial and hematologic malignancies. However, in spite of its pronounced effects, the clinical applications of RA are limited due to the retinoid acute resistance. Although RA induces complete remission in a high proportion of the patients of acute promyelocytic leukemia (APL), the cancer was relapsed in many patients after a brief remission in spite of a continued RA treatment. Patients who relapsed from remission that was initially induced by RA had clinically resistant to further RA treatment. That is, specific cytochrome P450 enzymes in the liver were induced by the continuous oral administration of RA, thereby accelerating the metabolism of RA. To overcome this problem, biodegradable microspheres were proposed by us, previously. And, several microsphere formulations for RA delivery have been prepared and studied on their effectiveness. Recently, poly(D,L-lactide) (PDLLA) microsphere formulation was optimized, And, from the animal studies by using a mouse and a rat, it have appeared to be effective on both the inhibition of tumor growth and chemoprevention of a carcinogenesis. In this study, subacute toxicities of the PDLLA microsphere formulation have been investigated as a preclinical test. For the test, the microspheres was injected subcutaneously into the back site of rats, and body weight change, clinical signs, hematological changes, blood biochemistry were evaluated. As a result, severe toxicities such as mortality were observed at the dose of 100mg RA/kg, and toxicities were not observed at the dose of 50mg RA/kg, which is the effective dose against carcinogenesis. Bone fracture, observed at several rats, might be inhibited by treating them with anti-inflammatory drugs.

• Korean Journal of Plant Resources
• /
• v.20 no.1
• /
• pp.73-78
• /
• 2007

Efficient pollination needs abundant fertile pollen in rose breeding. This study was performed to find out efficient staining methods for the detection of fertile pollen. Aceto-carmine and Alexander's stain gave similar results in terms of percentage of normal pollen. Fluorochromatic reaction (FCR) showed the lowest normal pollen percentage because FCR stained only fertile pollen while others stained cytoplasm. Toluidine blue O (TB) showed similar percentage of normal pollen to Aceto-carmine and Alexander's, but could not clearly distinguish the clustered abnormal pollens. Alexander's stain was easy and simple, but difficult to distinguish fertile and infertile pollen. FCR showed only fertile pollen. Alexander's stain showed approximate fertility and FCR showed exact pollen fertility.

• Korean Journal of Environmental Biology
• /
• v.20 no.3
• /
• pp.256-262
• /
• 2002

This research investigated experimentally on the population growth in the aquatic microcosm with the wastewater of plating factory. The purpose of this study was to evaluate the effect of culture conditions of the characteristic growth pattern of the examined species. Population of the system is consists of three organisms; Chlorella vulgaris as a producer, Cyclidium glaucoma as a consumer and Pseudomonas putida as a decomposer. The different growth patterns of each population are followed by surfactant type; Especially C. glaucoma was sensitive, Ch. uvlgaris was maintained population size stably even at high level of surfactant and p. putida was not significantly affected. After treatment of waste water from plating factory, it began to be affected at 1.0% solution treatment to Ch. vulgaris which the cell number was decreased prominently after 2 days, and C. glaucoma was disappeared at 2.5% solution treatment. P. putida was showed increasing pattern according to treatment concentration, at 2.5% solution and population size grew double. The result from current microcosm study indicates that this model system can be applied to environmental assessment method for various pollutants.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.420-425
• /
• 2006

Nano sized mixed metal hexagonal ferrite powders with improved magnetic properties have been prepared by sol-gel method using propylene oxide as a gelation agent. To obtain the desired ferrite, two different metal ions were used. One of the ions has only +2 formal charge. The key step in the processes is that hydrated $Ba^{2+}$ or $Sr^{2+}$ ions are hydrolyzed and condensed at the surface of the previously formed $Fe_{2}O_{3}$ gel. In this processes, all the reaction can be finished within a few minutes. The magnetic properties of the produced powder were improved by heat treatment. The highest values of the magnetic properties were achieved at temperature $150^{\circ}C$ lower than those of the previously published values. The highest observed values of coercivity and the saturation magnetization of Sr-ferrite and Ba-ferrite powder were 6198 Oe, 5155 Oe and 74.4 emu/g, 68.1 emu/g, respectively. The ferrite powder annealed at $700^{\circ}C$ showed spherical particle shapes. The resulting spheres which were formed by the aggregation of nanoparticles with size 3~5 nm have diameter around 50 nm. The powder treated at $800^{\circ}C$ showed hexagonal-shaped grains with crystallite size above 500 nm.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.176-181
• /
• 2011

The fan and pad evaporative cooling system is one of the main cooling methods in greenhouses. Its efficiency is very high, but it has some disadvantages as temperature gradient in greenhouse is large. This study was conducted to reduce the internal temperature gradients in the fan and pad cooling greenhouses. Experiments on cooling performance were carried out in a greenhouse equipped with air duct and integrated fan and pad system as an idea of this study. It showed that the cooling efficiency of an integrated fan and pad system was 75.7% in the first stage and 88.6% in the second stage. When this cooling system was operated for an unshaded and a shaded greenhouse, there were cooling effects of $5.7\sim7.6^{\circ}C$ and $7.4\sim9.7^{\circ}C$ to the control greenhouse, respectively. Maximum temperature differences in a cooling greenhouse, with a length of 18m, were $1.6\sim1.7^{\circ}C$ for shaded conditions and $2.3\sim2.7^{\circ}C$ for unshaded conditions. This greenhouse cooling method, with air duct and integrated fan and pad system, can reduce about 40~50% of the internal temperature gradients in the usual fan and pad cooling greenhouses.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.279-286
• /
• 2003

Many trials to set up the correlation between the rock mass classification and the earth resistivity have been carried out to design tunnel support type based on the interpreted electrical resistivity acquired by surface electrical survey. But it is hard to find reports on the comparison of the real rock support type determined during the excavation with the electrical resistivity by the inversion of the survey data acquired before the tunneling. In this study, the rock mass classification based on the face mapping data and the resistivity inversion data are investigated to see if it is possible to design reliably the rock support type based on the surface electrical survey. To get the quantitative correlation, rock engineering indices such as RCR(rock condition rating), N(Rock mass number), Q-system and RMR(rock mass rating) are calculated. Since resistivity data has low resolution, Kriging method as a post processing technique which minimizes the estimated variance is used to improve resolution. The result of correlation analysis shows that the 2D electrical resistivity survey is appropriate to see the general trend of the geology in the sense of rock type, though there might be some local area where these two factors do not coincide. But the correlation between the result of 3D survey and the rock mass classification turns out to be very high, and then 3D electrical resistivity survey can make it possible to set up more reliable rock support type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.677-684
• /
• 2016

In order to improve the nighttime visibility of the lane, the need for the development of the automated line marking equipment is on the rise. The purpose of this study is to suggest performance assessment methodology that can be assessed from various aspects such as productivity, safety and quality performance of line marking equipment and to comprehensively analyze the performance of hand-operated and automated equipment based on field test. The following shows the results. It suggested a methodology capable of analyzing the performance of the line marking equipment in terms of productivity, safety and quality. Automated equipment for line marking was analyzed that can be obtained productivity achievement rate of 156.3% as compared with hand-operated equipment. On the basis of the expert advise and literature review, we derived twelve safety factors and ten quality factors of unit work in line marking. By utilizing the AHP technique, we estimated the importance of safety and quality factors. Automated equipment for line marking was analyzed to have been able to expect safety improvement rate of 49.8% and quality improvement rate of 47.2%. It is expected that the performance assessment methodology suggested in this study will be useful in analyzing objective and quantitative validity and expected effectiveness of the line marking equipment.