• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.180-185
• /
• 2005

Purpose: To purpose of this study is to evaluate the clinical and radiological results of arthroscopic meniscus repair using Rapid Loc device. Materials and Methods: A retrospective study was performed on 44 cases which had been turned out longitudinal tear without degeneration. We repaired all cases with Rapid Loc device. Patients were evaluated using clinical examination, Orthopaedische Arbeitsgemeinschaft Knie (OAK) scheme, and MRI. We regarded patients with joint line tenderness, swelling or McMurray positive test as clinical failure. Results: A mean age was 33.3 years and follow-up period was average 15 months. Clinical results were excellent 15 cases(34.1%), good 20 cases(45.5%), fair 7 cases(15.9%), poor 2 cases(4.5%). MRI showed grade 115 cases(33.3%), grade II 22 cases(50%), grade III 7 cases(16.7%). Clinical failures were 8 cases and only one complication was developed. Conclusion: Rapid Loc device showed the excellent results in meniscus repair. We regard it has a lot of advantages in safety, softness, ease, ability to control tension at repair site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.305-313
• /
• 2019

Recently, spatial information is being constructed actively based on the images obtained by drones. Because occlusion areas occur due to buildings as well as many obstacles, such as trees, pedestrians, and banners in the urban areas, an efficient way to resolve the problem is necessary. Instead of the traditional way, which replaces the occlusion area with other images obtained at different positions, various models based on deep learning were examined and compared. A comparison of a type of feature descriptor, HOG, to the machine learning-based SVM, deep learning-based DNN, CNN, and RNN showed that the CNN is used broadly to detect and classify objects. Until now, many studies have focused on the development and application of models so that it is impossible to select an optimal model. On the other hand, the upgrade of a deep learning-based detection and classification technique is expected because many researchers have attempted to upgrade the accuracy of the model as well as reduce the computation time. In that case, the procedures for generating spatial information will be changed to detect the occlusion area and replace it with simulated images automatically, and the efficiency of time, cost, and workforce will also be improved.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.185-194
• /
• 1998

Flow-induced voids during resin impregnation and poor fiber wetting give serious effects on the mechanical properties of composites in resin transfer molding process. In order to better understand the characteristics of resin flow and to investigate the mechanism of void formation, flow visualization experiment for the resin impregnation was carried out on plain weaving glass fiber mats using silicon oils with various viscosity values. The permeability and the capillary pressure for the fiber mats of different porosities were obtained by measuring the penetration length of the resin with time and with various injection pressure. At low porosity and low operating pressure, the capillary pressure played a significant role in impregnation process. Video-assisted microscopy was used in taking the magnified photograph of the flow front of the resin to investigate the effect of the capillary pressure on the void formation. The results showed that the voids were formed easily when the capillary pressure was relatively high. No voids were detected above the critical capillary number of 2.75$\times$$10^{-3}, and below the critical number the void content increased exponentially with decrease of the capillary number. The content of void formed was independent of the viscosity of the resin. For a given capillary number, the void content reduced with the lower porosity of the fiber mat.

• Journal of the Korean Society of Radiology
• /
• v.8 no.2
• /
• pp.89-96
• /
• 2014

This paper tries to examine whether the application of joint mobilization to subjects who have the forward head posture due to malalignment in the cervical joint has influence on posture changes and functions in the cervical joint. The subjects were 39 students from G University in Gyeongsangbuk-do. The cervical joint mobilization was applied to 20 subjects and not to 19. The students with a cervical lordosis angle of $21^{\circ}C$ or less, an anterior weight bearing (AWB) of 15mm or greater, and a cervical extension ROM of $70^{\circ}C$ or less in terms of radiography were selected as subjects under their voluntary agreement. The patients actively performed the joint mobilization slowly 8 times per session while therapists continuously applied sustained accessory glide to their painful joints 3 times per week for 4 weeks along with the cervical expansion and flexion in SNAGS among other Mulligan's (1995) techniques. The measurement was carried out in terms of radiographic inspection and neck disability indexes. As a result of the experiment, it turned out that the subjects with the forward head posture had changes in the cervical AWB and ARA, the ranges of expansion and flexion, and the NDI(Neck Disability Index) after the intervention for the experimental group by applying cervical joint mobilization. There were no changes observed in the control group. In conclusion, the application of joint mobilization turned out to have influence on the improvement of cervical joint postures, and craniocervical region functions.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.42-52
• /
• 2017

Panorama image is a single image obtained by combining images taken at several viewpoints through matching of corresponding points. Existing panoramic image generation methods that find the corresponding points are extracting local invariant feature points in each image to create descriptors and using descriptor matching algorithm. In the case of video sequence, frames may be a lot, so therefore it may costs significant amount of time to generate a panoramic image by the existing method and it may has done unnecessary calculations. In this paper, we propose a method to quickly create a single panoramic image from a video sequence. By assuming that there is no significant changes between frames of the video such as in locally, we use the FAST algorithm that has good repeatability and high-speed calculation to extract feature points and the Lucas-Kanade algorithm as each feature point to track for find the corresponding points in surrounding neighborhood instead of existing descriptor matching algorithms. When homographies are calculated for all images, homography is changed around the center image of video sequence to warp images and obtain a planar panoramic image. Finally, the spherical panoramic image is obtained by performing inverse transformation of the spherical coordinate system. The proposed method was confirmed through the experiments generating panorama image efficiently and more faster than the existing methods.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.425-436
• /
• 2010

We established a stochastic 3-D fracture network system for fractured rock masses located in Il-Gwang Mine, Busan, to explore the relationship between the acidity of mine drainage and fracture geometry. A field scanline survey and borehole image processing were performed to estimate the best probability distributions of fracture geometry parameters. The stochastic 3-D fracture network system constructed for the rock masses was validated and deemed to be successful. The 3-D fracture network model was suitable for developing conceptual ideas on fluid flow in fractures at a field experimental site. An injection well and three observation wells were drilled at the field experimental site to monitor the acidity of mine drainage induced by the injection of fresh water. The field experiment, which was run for 29 days, yielded a significant relationship (with a high coefficient of determination) between the fracture geometry parameters and the acidity of mine drainage. The results show that pH increased with increasing relative frequency of fracture strike, and decreased with increasing fracture density. The concentration of $SO^{2-}_4$ decreased with increasing relative frequency of fracture strike, and increased with increasing fracture density.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2873-2878
• /
• 2009

Since Germany was unified in 1990, Korea became the only country that has the division in the world. This division has various bad effects on Korea's status with not reliable security, forfeited national impression, loss of tourism income and so on. Kim Jung-Il national defense committee chairman is the current dictator of North Korea which is a socialist state. Even if he is getting old, his successor is not proclaimed. In this situation, his sudden aggravation of health can cause seriously bad effects on diplomatic relations especially with South Korea. Therefore, the health information about Kim Jung-Il national defense committee chairman will be very important information. In order to deal this problem, we propose the method of extracting the Kim Jung-Il national defense committee chairman's health from his pictures which are recently open to the public by employing the diagnosis Ocular Inspection used in Oriental medicine. n order to get an accurate result, revising the Kim Jung-Il national defense committee chairman's pictures, which are not taken in a controled equal situation, is necessary. Therefore we employed the color analysis process with color revising and color differential comparing process without color revising. With these processes, we can make diagnosis of his diabetes and complications.

• Cartoon and Animation Studies
• /
• s.31
• /
• pp.227-248
• /
• 2013

With the advancement of computers, opening title sequences in movies are continuously improving. Initially, titles and opening credits were created using what is called the optical method, whereby text was photographed on separate film and then copied onto the movies film negative. In contemporary movie making, however, the title sequence may be seamlessly integrated into the beginning of the movie by an insertion method that not only allows for more diverse technical expression, including the use of both 2D and 3D graphics, but also for its emergence as an independent art form. As such a title sequence, in as little as 50 seconds or up to 10 minutes, is able to convey the films concept while also suggesting more implicit intricacies of plot and thereby eliciting greater interest in the movie. Moreover, according to the directors intent and for a variety of purposes, the title sequence, while maintaining its autonomy, is inseparable from the movie as an organic whole; therefore, it is possible to create works that are highly original in nature. The purpose of this study is to analyze the kinetic typography that appears in title sequences of ten films produced by the Korean entertainment industry in 2012. Production techniques are analyzed in a variety of ways in order to predict the future direction of opening title sequences, as well as present aesthetic and technical models for their creation.

• Conservation Science in Museum
• /
• v.8
• /
• pp.49-69
• /
• 2007

This is about the scientific analysis of the 10 items of the gilt-bronze Panbul excavated from Anapji, Gyeongju. First, the composition of the Panbul was confirmed, using X-ray fluorescence spectrometer (XRF), and the patinas covering the surface of the Panbul were analyzed, using X-ray diffractometer (XRD). And the micro structures and gilt layer of the Panbul were investigated, using microscope and scanning electron microscope with energy dispersive spectrometer (SEM/EDS), and in order to investigate the internal conditions of the Panbul, X-radiography was conducted. As the result, it is found out that the material of the Panbul excavated from Anapji was the bronze of copper (86~95%) and tin (4~12%), and coated with gold. And cuprite (Cu₂O) was detected from red patina of the gilt-bronze Panbul, and chalcocite(Cu₂S) also was detected from the black patina. As the result of the observation of the micro structure through microscope, it is estimated that it was manufactured, using the wax molding method, and, judging from the fact that the thickness of gilt layer was not even, and that the groove had been filled, it was presumed that the amalgam coating method had been used, but some questions still remain, because mercury was not detected. Lastly, through the X-radiography, it was observed that the tiny round spots existed, which was presumed to have been generated during the casting.

• Journal of Chest Surgery
• /
• v.41 no.6
• /
• pp.718-723
• /
• 2008

Background: The advances in surgical techniques, anesthesia management, perfusion methodology and postoperative intensive care have markedly decreased the mortality and cardiac morbidity of patients who undergo heart surgery over the past 2 decades. Nevertheless, it is well recognized that cardiac surgery carries a substantial risk for central nervous system complications. This study was conducted to evaluate the prevalence of subclinical cerebrovascular lesions in the head and neck by performing magnetic resonance angiography (MRA), and we investigated the clinical course of patients who had abnormal lesion seen on head and neck MRA. Material and Method: The subjects were 107 patients (71 men and 36 women ranging in age from 21 to 83 years) who were scheduled for cardiac surgery under nonemergency conditions between October 2005 and June 2008. Informed consent was obtained before the MRA. The carotid arteries, intracranial arteries and brain parenchyme were examined for subclinical cerebrovascular lesions by performing MRA. We reviewed the patients' medical records and MR findings to evaluate the prevalence of neurologically high risk patients and their clinical course. Result: The overall prevalence of neurologically high risk patients was 15.7% (17 patients). Among these patients, 11 patients had ischemic heart disease and 6 patients had valvular heart disease. Only 2 patients had a history of cerebrovascular disease. The clinical courses of 14 patients (13.1%) were changed according to their MRI findings. Conclusion: The prevalence of subclinical cerebrovascular disease in patients who were scheduled for cardiac surgery was higher than was expected. MR angiography was of value to identify these patients.