• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.2
• /
• pp.113-122
• /
• 2007

Purpose: We proposed the method using dose-volume Histogram index to compare prospective plan trials in tomotherapy planning optimization. Materials and Methods: For 3 patients in cranial region, thorax and abdominal region, we acquired computed tomography images with PQ 5000 in each case. Then we delineated target structure and normal organ contour with pinnacle Ver 7.6c, after transferred each data to tomotherapy planning system (hi-art system Ver 2.0), we optimized 3 plan trials in each case that used differ from beam width, pitch, importance. We analyzed 3 plan trials in each region with isodose distribution, dose-volume histogram and dose statistics. Also we verified 3 plan trials with specialized DVH-indexes that is dose homogeneity index in target organ, conformity index around target structure and dose gradient index in non-target structures. Results: We compared with the similarity of results that the one is decide the best plan trial using isodose distribution, dose volume histogram and dose statistics, and the another is using DVH-indexes. They all decided the same plan trial to better result in each case. Conclusion: In some of case, it was appeared a little difference of results that used to DVH-index for comparison of plan trial in tomotherapy by special goal in it. But because DVH-index represented both dose distribution in target structure and high dose risk about normal tissue, it will be reasonable method for comparison of many plan trials before the tomotherapy treatments.

• Imaging Science in Dentistry
• /
• v.31 no.3
• /
• pp.165-173
• /
• 2001

Objectives : To evaluate the absorbed and effective doses of spiral and computed tomography for the dental implant planning. Materials and Methods: For radiographic projection, TLD chips were placed in 22 sites of humanoid phantom to record the exposure to skin and the mean absorbed dose to bone marrow, thyroid, pituitary, parotid and submandibular glands and nesophagus. Effective dose was calculated, using the method suggested by Frederiksen et al.. Patient situations of a single tooth gap in upper and lower midline region, edentulous maxilla and mandible were simulated for spiral tomography. 35 axial slices (maxilla) and 40 axial slices (mandible) with low and standard dose setting were used for computed tomography. All the radiographic procedures were repeated three times. Results: The mean effective dose in case of maxilla was 0.865 mSv, 0.452 mSv, 0.136 mSv and 0.025 mSv, in spiral tomography of complete edentulous maxilla, computed tomography with standard mAs, computed tomography with low mAs and spiral tomography of a single tooth gap (p<0.05). That in case of mandible was 0.614 mSv, 0.448 mSv, 0.137 mSv and 0.036 mSv, in spiral tomography of complete edentulous mandible, computed tomography with standard mAs, computed tomography with low mAs and spiral tomography of a single tooth gap (p<0.05). Conclusions: Based on these results, it can be concluded that low mAs computed tomography is recommended instead of spiral tomography for the complete edentulous maxilla and mandible dental implant treatment planning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.281-288
• /
• 2006

Recent increase in the number of pixels of a non-metric digital camera encourages to use it for close-range photogrammetry such as modeling cultural asset and buildings. However, these cameras have to be calibrated far close-range photogrammetry application. For self-calibration, an appropriate pbotograrnmetric network and object field should be designed. In this paper, we studied the effect on self-calibration accuracy changes according to the change of the number of ground control points, dimensions of the ground control points, and the combination of images. We concluded that self-calibration with three photos including a vertical photo can give the stable accuracy of interior orientation parameters and 10 ground control points on a plane can give high accuracy for object reconstruction.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.102-108
• /
• 2015

With the constantly increasing demand of domestic and oversea satellite images, there is also a growing demand to rapidly acquire images after the satellite image collection planning of KOMPSAT-2/3/5. Therefore, it has been increasing to use the korea ground station and oversea ground station to keep pace with increased demand. The KARI is operating Data Ingestion System of the KOMPSAT-2/3 in Svalbard, where the satellite images have been received at least four or six times a day. The KARI is planning to operate oversea receiving system for KOMPSAT-5/3A. This paper introduces the polar data ingestion system operating in Norway, and presents the process of design and development for Polar Integration receiving system in preparation of multiple satellite operation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1343-1351
• /
• 2014

Recent technological advances in wireless networks and microelectromechanical systems (MEMS) have led to the development of different types of mini-UAVs and their utilizations in various ways. This study endeavors to develop a low-cost mini-UAV with autonomous flight capability, in order to obtain geospatial information of a small or medium-sized area, and also assess its flight stability by comparing the predetermined flight paths against the actual flight paths. Based on a post-development flight test, stable flight has been proven achievable as follows: the maximum endurance speed is 1 hour, the flying distance is 50km, the horizontal accuracy of flight paths is about ${\pm}6{\sim}8m$, and the altitude accuracy is about ${\pm}8m$. Therefore, it is deemed that high-resolution images which can be utilized for geospatial information are obtainable. This indicates that a UAV flying at an altitude of 200m can acquire images across a $2km{\times}3km$ area on the ground within 25 minutes, which validates its high usability for obtaining high-solution images at low altitudes in the future.

• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.730-734
• /
• 1998

Background: It is important to know the location, number, size and shape of bullae before thoracotomy or VATS bullectomy. Chest X-ray and chest CT may be used but with some limitation. The purpose of this study was to compare the diagnostic value of thoracography with that of chest X-ray in preoperative detection of bullae. Meterial and Method: Thoracography was performed by injection of non-ionic water-soluble dye into pleural space in 22 primary spontaneous pneumothoraces, which underwent thoracotomy or VATS bullectomy. Chest X-ray and thoracography were compared through operative finding. Results: Sensitivity and accuracy of thoracography(75% and 72.7%) were higher than those of chest X-ray(30% and 36.4%). However, specificity of thoracography(50%) was lower than that of chest X-ray (100%). There were no complications during or after thoracography. Conclusion: Thoracography is a safer and more useful method for preoperative detection of bullae when compared with chest X-ray.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.281-287
• /
• 2007

Contrast media may cause tissue injury by extravasation during intravenous automated injection during CT examination. Here, we present a study in which contrast media extravasation was detected and localized in the neck and thorax by three-dimensional(3D) CT data reformation. The CT studies of the extavasation site were performed using a 3D software program with four different display techniques axial, multi planar reformation(MPR), maximum intensity projection(MIP), and volume rendering displays are currently available for reconstructing MDCT data. 3D image reconstructions provide accurate views of high-resolution imaging. This paper introduces extravasation with the MDCT and 3D reformation findings of contrast media extravasation in neck ant thorax. The followed injection of the external jugular vein into an existing intravenous catheter and a large volume of extravasation was demonstrated on by 3D MDCT.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.170-175
• /
• 2014

The growth disorder influences craniofacial development and early loss of permanent teeth. This case reports the importance of computerized tomography (CT) and surgical guide to identify horizontal bone loss, adjacent teeth and to guide drills when placing implants in a short stature patient. The patient has idiopathic short stature and the 3rd grade of intellectual disability. To recover posterior mandibular teeth, implant treatment was planned. CT images showed that the adjacent teeth were located markedly to the buccal side. A CT-based surgical guide was fabricated and implants was placed using flapless surgery. Bone dehiscence and fenestration may happen when the surgical guide was fabricated just based on adjacent clinical crowns. Thus, it is essential to analysis bone and teeth and to make surgical guide through CT, especially in atrophied bone on grow disorder patients. Furthermore, systematic researches are recommended to elucidate the relationship between growth disorder and tooth malposition.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.41-50
• /
• 2010

Because mountain area covers a large proportion of entire country, the forest fire have been an important matter in disaster prevention in Korea. Estimation of damaged area after forest fire would be very important because it would be the basis to make budget or to calculate quantities in the restoration plan for the damaged area. In Korea, the damaged area from forest fire is generally surveyed using GPS. In practice, however, the estimation of damaged area from forest fire have been inaccurate in lots of case due to some problems. Korea Forest Service which is taking charge of prevention of forest fire in Korea is managing a large number of helicopters for forest service on the whole country. So, it would be possible to take snapshots of the damaged area after forest fire from the helicopter using a digital camera. This study aims to establish a suitable method to estimate damaged area after forest fire using snapshots which are taken in the air using a digital camera. So, several approaches were implemented and compared. In future, results of this study could be used in a development of a system for investigation of damages from forest fire using digital photographs.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.347-347
• /
• 2004

임상도는 항공사진을 판독하여 얻어진 산림에 관한 정보를 지형도(1/25,000)에 도화 작성한 도면으로 전국 산림조사와 연계하여 10년을 주기로 순환제작 되며, 현재 제 4차 수치임상도가 제작 중에 있다 임상도는 여러 산림관련 주제도 중 가장 많이 활용되는 도면으로 산림 분야뿐만 아니라 다른 분야에서도 널리 활용되고 있다. 그러나 10년을 주기로 제작되므로 부분적으로 현실과 부합하지 않는 내용이 포함되어 있어 각종 계획수립 및 활용에 장애요인으로 작용하고 있다. 따라서 실제 임상정보를 획득할 수 있도록 지속적인 갱신이 필요하다. 그러나 임상도의 부분적 갱신을 위하여 별도의 항공사진을 촬영하는 것은 현실적인 어려움이 있으며, 최근 고해상도 위성영상이 활용 가능하게 됨에 따라 임상도의 갱신에도 활용될 수 있을 것으로 기대되고 있다. 본 연구에서는 고해상도 위성영상인 IKONOS를 이용하여 수치임상도를 갱신하는 방법을 제시하였다. 연구대상지는 제 4차 임상도의 수치화가 완료된 전라북도 완주 지역으로 1:25000 지형도의 도엽명 대아와 읍내의 일부지역이다. 영상자료는 2001년 8월 18일에 촬영된 IKONOS Multispectral 자료를 이용하였다. 영상의 기하보정을 위하여 RPC Model과 1:25000 수치지형도로부터 만들어진 DEM을 사용하였다. 기하보정된 영상을 이용하여 영상분할(Segmentation)을 실시하여 서로 중복되지 않는 동질한 지역으로 구분하였다. 이때 기존의 수치임상도를 Super-Object로 사용하여 영상을 분할할 때 형성될 수 있는 가장 큰 Segment로 제한하였으며 Super-Object의 경계를 벗어나지 않는 보다 작은 Sub-Object를 만들도록 하여 분할영상의 계층적 구조를 형성하였다. 어느 한 임상내에서 변화가 발생하면 변화가 발생한 지역은 변화가 발생하지 않은 지역과 서로 다른 분광특성을 나타내므로 별도의 Segment를 형성하게 된다. 따라서 임상도의 경계선으로부터 획득된 Super-Object의 분광반사 값과 그 안에서 형성된 Sub-Object의 분광반사값의 차이를 이용하여 임상도의 갱신을 위한 변화지역을 탐지하였다.