• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.276-276
• /
• 2019

하천에서 신뢰성 있는 유속 및 유량의 측정 자료는 수자원의 효율적인 계획과 관리를 위한 가장 기본적인 사항이다. 유속 및 유량을 측정하기 위해 지금까지는 주로 프로펠러 유속계나 초음파유속계 또는 봉부자 등을 활용해왔으며, 홍수 시에는 봉부자에 의존하고 있다. 봉부자를 이용한 유속 측정은 측정 환경이나 측정자에 따라 정확도 차이가 난다는 한계점이 있다. 뿐만 아니라 실제로 홍수가 발생했을 때는 유량이 매우 크기 때문에 교량으로 접근이 어렵고 현장으로의 접근자체가 제한될 수 있다. 위와 같은 문제들을 해결하기 위한 대안으로 비접촉식 유속 측정방법인 표면영상유속계(LSPIV, Large Scale Particla Image Velocimetry)가 있다. 표면영상유속계는 수면을 촬영한 영상을 분석하여 표면 유속을 측정하는 기법으로, 영상 촬영 장비와 분석 소프트웨어만 있으면 유속을 측정할 수 있다. 유속 및 유량 측정 결과를 보고할 때는 그 결과를 사용하는 사람이 얼마나 믿고 사용해도 좋은가에 관한 신뢰성을 판단할 수 있도록 신뢰도를 나타내는 어떤 정량적인 값인 불확도를 유량 측정 결과와 함께 제시하여야 한다. 표면영상유속계는 매우 간편하고 신속하게 하천의 유속장을 측정하는 기법이지만 측정 불확도 산정에 대한 연구가 미흡하여 정확한 측정 불확도를 제시할 수 없는 실정이다. 표면영상유속계의 불확도 인자는 바람의 영향, 입자 밀도/크기, 촬영시간 간격, 상관영역의 크기, 전단흐름/회전흐름, 참조점 측량/식별, 이동거리 산정 등이 있다. 표면영상유속계의 측정불확도를 제시하기 위해서는 각 불확도 인자에 대한 불확도를 제시하여야 한다. 따라서 본 연구에서는 Matlab을 이용하여 표면영상유속계의 불확도 요인 중 영상에서 참조점식별 시 발생하는 불확도를 분석하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.349-349
• /
• 2020

기후변화로 인한 돌발홍수와 같은 집중적인 강우현상은 노후화된 제방의 안정성 저하 및 붕괴 등을 야기시킨다. 향후 홍수량이 증가함에 따라 하천의 통수면적이 부족하여 침수 및 범람의 위험성이 증가할 것으로 생각된다. 계획규모 이상의 홍수가 발생하여 홍수위가 제방고보다 높을 때 월류에 의한 제방붕괴로 이어지며, 이러한 월류에 의한 제방붕괴는 가장 전형적인 것이다. 지금까지 월류에 의한 제방붕괴에 관한 연구는 연구자의 다양한 관점 및 방법을 통해 진행되고 있다. 실제 제방붕괴를 관측하는 것은 불가능하므로 기존의 소규모 수리실험 및 모델링을 통한 제방붕괴 메커니즘 분석에는 사실상 한계가 있다. 이러한 점에서 실규모 수리실험을 통한 월류에 의한 제방붕괴 메커니즘을 3차원으로 분석할 필요가 있다. 본 연구에서는 드론 영상을 이용하여 제방붕괴 메커니즘 분석 연구를 수행하였다. 제방은 시간의 흐름에 따라 붕괴양상이 발전한다는 점 등에서 매우 복잡한 물리적 특성이 있다. 드론의 오토촬영 기법을 통한 제방이 붕괴되는 순간을 촬영하기는 쉽지 않기 때문에 셔터스피드촬영 기법을 적용하였다. 특히, 짧은 시간에 변화되는 제방의 붕괴양상을 구체적으로 표현하기 위해 두 대의 드론을 횡·종 방향으로 동시에 비행하여 분석 시 3차원 입체감을 최대화하였다. 이후 횡·종 방향에서 동 시간대 수집된 드론 이미지를 분류하여 PIX4D 매핑 기법을 활용한 최소 정합을 통하여 드론을 활용한 제방붕괴 메커니즘 분석의 활용 가능성을 제시하였다. 향후 스마트 시대의 물산업 경쟁력을 제고함에 있어, 폭이 좁은 하천에 효율적이며 고해상도 시공간 자료를 확보할 수 있는 드론을 활용한 스마트 하천재해 예측 및 관리기술 개발을 통한 하천 원격탐사의 경쟁력을 확보하는 것이 중요하다고 사료된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.111-119
• /
• 2015

Purpose: The objective of this study was to evaluate the accuracy of a stereolithographic surgical guide that was made with information from intraoral digital impressions and cone beam CT (CBCT). Materials and methods: Six sets of resin maxilla and mandible models with missing teeth were used in this study. Intraoral digital impressions were made. The virtual models provided by these intraoral digital impressions and by the CBCT scan images of the resin models were used to create a surgical guide. Implant surgery was performed on the resin models using the surgical guide. After implant placement, the models were subjected to another CBCT scan to compare the planned and actual implant positions. Deviations in position, depth and axis between the planned and actual positions were measured for each implant. Results: The mean deviation of the insertion point and angulation were 0.28 mm and $0.26^{\circ}$, apex point were 0.11 mm and 0.14 mm respectively. The implants were situated at a mean of 0.44 mm coronal to the planned vertical position. Conclusion: This study demonstrates that stereolithographic surgical guides created without the use of impressions and stone models show promising accuracy in implant placement.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.415-421
• /
• 2017

In the case of radiation therapy for prostate cancer, a balloon infused with a certain amount of air through the anus is used to reduce rectal dose. Because of the reason, radiation therapy for prostate cancer has acquired CBCT for daily image induction. In order to maintain the anatomical structure most similar to the first CT taken before treatment, it is pretreated, but it can not be said to be perfectly consistent. In two actual treatment regimens, the volume of the bladder was measured as 45.82 cc and 63.43 cc, and the equivalent diameter was 4.4 cm and 4.9 cm. As a result of this study, the mean volume of the bladder was estimated to be 56.2 cc, 105.6 cc by 20 CBCT. The mean dose of CBCT was 1.74% and the mean Bladder mean dose was 96.67%. In case B, PTV mean dose was 4.31%, Bladder mean Dose was estimated to be 97.35%. The changes in the volume of the bladder resulted in changes in the dose of PTV and bladder. The correlation coefficient of bladder dose according to the change of bladder volume showed linearity of mean dose $R^2=-0.94$. The correlation coefficient of the PTV dose according to the volume change of the bladder showed linearity of mean dose $R^2=0.04$. It was found that the dose change of PTV was larger than that of bladder according to the change of bladder volume.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.3
• /
• pp.266-276
• /
• 2021

Fundus hemorrhage refers to abnormalities in the retinal tissue and blood vessels. Therefore, when a hemorrhagic change in the fundus occurs, the ophthalmologist orders various ophthalmic tests to evaluate the degree of hemorrhage and determine the progress of the lesion before, during, and after treatment to accordingly establish a treatment plan. Currently, the most useful and universal fundus examination includes optical coherence tomography (OCT), fundus photography (FP), and fluorescein angiography (FAG). Existing fluorescein angiography test methods for establishing a treatment plan for severe fundus bleeding have limitations. The authors propose that peripheral pupil and the 5-quadrant method should be performed using ultra-wide-angle fluorescence fundus angiography (UWFFA). Using this method, it is possible to quickly determine the area to be described, avoid the radius of bleeding as much as possible, and provide the ophthalmologist with a range of damaged tissue and abnormal blood vessels. Nevertheless, there are cases in which ophthalmologists judge that fundus bleeding is so severe that ultra-wide-angle fluorescence fundus angiography is meaningless. In such cases, ophthalmic ultrasound and electroretinogram may be used in that order as alternative methods of examination. Therefore, some clinical situations require the use of ophthalmic ultrasound and electroretinogram and should be performed accurately.

• Archives of Hand and Microsurgery
• /
• v.23 no.4
• /
• pp.281-289
• /
• 2018

Purpose: Preoperative surgical planning utilizing computed tomography angiography (CTA) has now become a routine in many practices. We analyzed the course of the deep inferior epigastric artery (DIEA) and its perforators (DIEP) that would either facilitate or hinder flap dissection based on CTA to aid surgical planning. Methods: The 115 consecutive patients who underwent abdominally based free flap breast reconstruction were enrolled in this prospective study. DIEA/P courses were categorized mainly according to their intramuscular courses and their incidences were investigated. Results: A total of 425 perforators were identified preoperatively on the CTA, with an average number of 3.7 distinctly visualized in the entire flap territory. Eighty-nine perforators (20.9%) had a favorable (less than 1 cm intramuscular course) pattern, namely long submuscular (34.8% of the patients), long subfascial (15.6%), and total circummuscular (13.9%). Overall 56.5% of the patients had at least one favorable DIEA/P. On the other hand, absence of DIEA and absence of adequate (>1 mm) DIEP was reported in 3 and 8 hemiabdomen. Conclusion: Preoperative CTA evaluation of DIEA/P can be used to identify favorable as well as unfavorable courses for dissection to aid surgical planning.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.35-40
• /
• 2013

Recently, the uses of Multi-Detector Computed Tomography (MDCT) for radiation treatment simulation and planning which is used for intensity modulated radiation therapy with high technique are increasing. Because of the increasing uses of MDCT, additional doses are also increasing. The objective of this study is to evaluate the absorbed dose of body and skin undergoing in MDCT scans. In this study, the exposed dose at the surface and the center of the cylindrical water phantom was measured using an pencil ionization chamber, 30 cc ionization chamber and TL Powder. The results of MDCT were 31.84 mGy, 33.58 mGy and 32.73 mGy respectively. The absorbed dose at the surface showed that the TL reading value was 33.92 mGy from MDCT. These results showed that the surface dose was about 3.5% from the MDCT exposure higher than a dose which is located at the center of the phantom. These results mean that the total exposed dose undergoing MDCT 4 times (diagnostic, radiation therapy planning, follow-up et al.), is about 14 cGy, and have to be considered significantly to reduce the exposed dose from CT scan.

• Korean Journal of Remote Sensing
• /
• v.15 no.2
• /
• pp.119-130
• /
• 1999

At present, many ground stations all over the world are using NORAD orbit element data in order to track and communicate with Earth orbiting satellites. The North American Aerospace Defense Command (NORAD) observes thousands of Earth orbiting objects on daily basis and provides their orbital information via internet. The orbital data provided by NORAD, which is also called two line element (TLE) sets, allows ground stations to predict the time-varying positions of satellites accurately enough to communicate with the satellites. In order to complete the mission of a high resolution remote sensing satellite which requires very high positional determination and control accuracy, however, a mission control and tracking ground station is dedicated for the observation and positional determination of the satellite rather than using NORAD orbital sets. In the case of KITSAT-3, NORAD orbital elements are currently used for image acquisition planning and for the processing of acquired images due to the absence of a dedicated KITSAT-3 tracking ground system. In this paper, we tested and analyzed the accuracy of NORAD orbital elements and the appropriate prediction model to determine how accurately a satellite acquisites an image of the location of interest and how accurately a ground processing system can generate the catalog of the images.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.63-69
• /
• 1992

Recently, stereotactic radiosurgery plan is required with the information of 3-D image and dose distribution. The purpose of this research is to develop 3-D radiosurgery planning system using personal computer. The procedure of this research is based on three steps. The first step is to input the image information of the patient obtained from CT or MR scan into personal computer through on-line or digitizer. The position and shape of target are also transferred into computer using Angio or CT localization. The second step is to compute dose distribution on image plane, which is transformed into stereotactic frame coordinate. and to optimize dose distribution through the selection of optimal treatment parameters. The third step is to display both isodose distribution and patient image simultaneously using superimpose technique. This prototype of radiosurgery planning system was applied recently for several clinical cases. It was shown that our planning system is fast, accurate and efficient while making it possible to handle various kinds of image modelities such as angio, CT and MRI. It is also possible to develop 3-D planning system in radiation therapy using beam's eye view or CT simulation in future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.1
• /
• pp.19-27
• /
• 1993

For the design of a large-scale landfill, the future utilization plan of the landfill ought to precede based on the analysis of existing facility. Analysis for the present condition of reclamation must include accurate assesment of volume and other consideration such as urban scenery. In this study an optimum data interpolation scheme area/volume determination method based on the classification of topography were combined for the correct assessment of sweeping volume. Combined model was compared with the real data of Digital Elevation Model constructed by aero photography. The new model aims at providing basic information for the design and utilization of a new landfill. A a result of this study, we made an algorithm to perform the classification of the topography in the area of interest objectively. In addition, we decided optimal data interpolation scheme and area/volume calculation method for given topography. Finally, we applied the developed methodology to Nangido Landfill to assess current landfill situation and potential capacity when landfilling is resumed.