• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2015

Purpose : External markers respiratory movement measuring device (RPM; Real-time Position Management, Varian Medical System, USA) Liver Cancer Radiation Therapy Respiratory gated with respiratory signal with irradiation time and the actual research by analyzing the respiratory phase with the breathing motion measurement device respiratory tuning evaluate the accuracy of radiation therapy Materials and Methods : May-September 2014 Novalis Tx. (Varian Medical System, USA) and liver cancer radiotherapy using respiratory gated RPM (Duty Cycle 20%, Gating window 40% ~ 60%) of 16 patients who underwent total when recording the analyzed respiratory movement. After the breathing motion of the external markers recorded on the RPM was reconstructed by breathing through the acts phase analysis, for Beam-on Time and Duty Cycle recorded by using the reconstructed phase breathing breathing with RPM gated the prediction accuracy of the radiation treatment analysis and analyzed the correlation between prediction accuracy and Duty Cycle in accordance with the reproducibility of the respiratory movement. Results : Treatment of 16 patients with respiratory cycle during the actual treatment plan was analyzed with an average difference -0.03 seconds (range -0.50 seconds to 0.09 seconds) could not be confirmed statistically significant difference between the two breathing (p = 0.472). The average respiratory period when treatment is 4.02 sec (${\pm}0.71sec$), the average value of the respiratory cycle of the treatment was characterized by a standard deviation 7.43% (range 2.57 to 19.20%). Duty Cycle is that the actual average 16.05% (range 13.78 to 17.41%), average 56.05 got through the acts of the show and then analyzed% (range 39.23 to 75.10%) is planned in respiratory research phase (40% to 60%) in was confirmed. The investigation on the correlation between the ratio Duty Cycle and planned respiratory phase and the standard deviation of the respiratory cycle was analyzed in each -0.156 (p = 0.282) and -0.385 (p = 0.070). Conclusion : This study is to analyze the acts after the breathing motion of the external markers recorded during the actual treatment was confirmed in a reproducible ratios of actual treatment of breathing motion during treatment, and Duty Cycle, planned respiratory gated window. Minimizing an error of the treatment plan using 4DCT and enhance the respiratory training and respiratory signal monitoring for effective treatment it is determined to be necessary.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2018

The study figured out the operational conditions of a two-way movement actuator made of one-way shape memory alloy (OWSMA) for versatile ventilation intelligent garments. To develop a low-power actuator that consumes energy only when a garment changes its form such as opening and closing, multiple channels of OWSMA were used, and optimum diameter of the wires was examined. For the switch device, optimum voltage application unit time was determined. Optimum diameter of OWSMA wire was determined by applying 3.7V to the pre-determined candidate diameters, which demonstrated two-way operation in previous studies. In order to evaluate the optimum voltage application time, the internal diameter of the actuator was measured while increasing and decreasing by 50 ms from the unit time of voltage application. Delay time under two-way operation of the actuator was measured to minimize interference caused by heat between channels. Power of 3.7V was applied to OWSMA for assessment of optimal time, and the whole process from heating to cooling was video-recorded with a thermal image camera to determine the point of time at which the temperature of OWSMA wire dropped below the phase transformation temperature. The results showed that $0.4{\Phi}$ was the most suitable diameter, and the optimum unit time of voltage applied to open and close the actuator was 4100ms. It was also shown that the delay time should be more than 1.8 seconds between two-way operations of the actuator.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.7
• /
• pp.231-243
• /
• 2024

As generative artificial intelligence (AI) services become more diversified and widely used, attempts and discussions on their application in education have become active. The purpose of this study is to investigate and analyze general and work-related perceptions, utilization, and needs regarding generative AI in elementary and secondary education. A survey was conducted among teachers and staff in Chungcheongbuk-do, and 934 responses were analyzed. The main research results are as follows: First, their work-related use of generative AI was lower than their general use, and considering the periodic frequency of more than once a month, the rate was much lower. Second, the main expectation when using generative AI in work appears to be improved work efficiency. Third, regarding the use of generative AI for each task, differences in perception of its usefulness were noticeable depending on position and occupation. They generally responded positively to the usefulness of generative AI in processing documents. To facilitate the use of generative AI for work by elementary and secondary teachers and staff, it is necessary to create an environment that promotes its use while ensuring safety against potential side effects. Additionally, requirements and needs should be considered depending on the position and occupation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.142-142
• /
• 2016

무전해 니켈 도금은 산업기계 부품, 자동차 부품, 항공 및 전자 통신 부품 등에 이르기까지 산업 전반에서 폭넓게 사용되고 있다. 이는 무전해 니켈 도금 층이 우수한 균일성, 내마멸성, 내식성 등을 지녀 관련 연구가 지속적으로 활발하게 진행되어 왔기 때문이다. 특히, 최근에 이르기까지 도금 층이 얇고, 우수한 내마멸성 및 낮은 마찰계수를 활용한 무전해 니켈 도금은 산업현장에서 기계 부품들의 수명을 연장시키고, 그 성능을 개선시키는데 용이하게 적용되고 있다. 본 연구에서는 이와 같이 무전해 니켈 도금 층의 우수한 특성을 활용하여 해수 부식과 캐비테이션-침식 복합 환경 하에 놓여 있는 금속 재료의 손상을 방지하고자 하였다. 이는 선박의 경우 최근 고속화, 대형화 추세에 따라 부품의 내구성 향상과 연비 효율성이 더욱 강조되고 있으며, 그에 따라 해수 속에서 고속 회전으로 더욱 가혹해진 캐비테이션 침식-부식 환경하에 놓인 선박의 프로펠러, 펌프 임펠러 및 케이싱 등의 금속재료 자체를 보호할 수 있는 고성능 재료의 개발이 요구되고 있기 때문이다. 또한 해양환경 하에서 무전해 니켈 도금 층에 대한 캐비테이션 침식 손상에 대한 연구는 미비한 실정이다. 본 연구에서는 회주철 표면에 무전해 니켈 도금을 실시하여 캐비테이션 침식 손상을 방지하고자 하였다. 무전해 니켈 도금을 실시하기 전 도금 층을 균일하게 형성하기 위해 샌드 페이퍼 #1200까지 연마 후 알칼리 탈지 실시하고, 산세(10% HCl)와 수세를 순차적으로 실시하여 전처리하였다. 이후 무전해 니켈 도금은 황산니켈, 차아인산나트륨, 구연산, 아세트산나트륨 그리고 미량의 질산납으로 구성된 도금욕에서 pH 4-6, $80-90^{\circ}C$의 조건으로 실시하였으며, pH는 NaOH를 이용하여 조정하였다. 이렇게 제작된 무전해 니켈 도금 층에 대하여 천연 해수 속에서 ASTM-G32 규정에 의거한 캐비테이션 침식실험을 통해 내구성을 평가하였다. 캐비테이션 실험 후에는 무게 감소량, 표면 손상깊이, 침식 손상 경향 등을 종합적으로 분석 비교하였다. 그 결과, 회주철에 대하여 무전해 니켈 도금을 실시할 경우 현저한 캐비테이션-침식 저항성 향상이 관찰되었다.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.3
• /
• pp.317-338
• /
• 2015

The main purpose of this research is to examine the relation of variables related to the worker's stress symptoms and coping. The influence of emotional support(from family, colleague, and boss), self-efficacy (self-regulatory, social, relational, resiliency, and management of work), job-satisfaction, and job-performance on worker's stress symptoms and coping is analyzed. Participants were 559 teachers (elementary 205, junior high 203, senior high 151; male 132, female 427). The results were as follows: There were no significant differences in stress symptoms and coping among primary, junior and senior high school teachers. On the other hand, there were significant differences in stress symptoms and coping between male and female teachers. Female teachers experienced more stress symptoms than male teachers. At the same time female teachers coped more efficiently in stress situation than male teachers. With emotional support, self-efficacy, job-performance and job-satisfaction as independent variables, the result of multiple regression showed that job-satisfaction has a negative influence on stress symptoms. Positive influences on stress coping was found for resiliency of self-efficacy in case of male teachers, and in case of female teachers resiliency of self-efficacy, emotional support from colleague, job-performance, and emotional support from family. Therefore, regardless of the gender of the teachers, high job-satisfaction decreased stress symptoms and high resiliency of self-efficacy increased efficient stress coping. As for female teachers, not only resiliency of self-efficacy but also emotional support from colleague and family, job-performance contributed to coping with stress.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.

• KIPS Transactions on Software and Data Engineering
• /
• v.13 no.1
• /
• pp.1-16
• /
• 2024

Over recent years, 6 Sigma has become a key methodology in manufacturing for quality improvement and cost reduction. However, challenges have arisen due to the difficulty in analyzing large-scale data generated by smart factories and its traditional, formal application. To address these limitations, a big data-based 6 Sigma approach has been developed, integrating the strengths of 6 Sigma and big data analysis, including statistical verification, mathematical optimization, interpretability, and machine learning. Despite its potential, the practical impact of this big data-based 6 Sigma on manufacturing processes and management performance has not been adequately verified, leading to its limited reliability and underutilization in practice. This study investigates the efficiency impact of DX SS, a big data-based 6 Sigma, on manufacturing processes, and identifies key success policies for its effective introduction and implementation in enterprises. The study highlights the importance of involving all executives and employees and researching key success policies, as demonstrated by cases where methodology implementation failed due to incorrect policies. This research aims to assist manufacturing companies in achieving successful outcomes by actively adopting and utilizing the methodologies presented.

• Journal of Internet Computing and Services
• /
• v.7 no.4
• /
• pp.115-122
• /
• 2006

The purpose of this paper is to suggest the improving plans about the system as searching an effective managing devices for NEIS with analysis of managing condition. For the plans, questionnaire was performed in the five sections to primary and secondary school teachers. Those were recognition about C/S, Introduction and conductive processing of NEIS, Satisfaction of specific task on school affairs and educational matters, its function, efficiency and security as well as technical problem. Those were recognition about C/S, Introduction and conductive processing of NEIS, Satisfaction of specific task on school affairs and educational matters, its function, efficiency and security as well as technical problem. The results are following: First. in spite of satisfaction with function of C/S, it have been some problems such as frequent patch and down of server. Secondly, although the introduction of NEIS was done in hurry without gathering teachers' opinions and sufficient research of system, it has been expected to settle down normally with correction and security. Thirdly, positive reaction was generally showed in research on satisfaction of specific task for school affairs and educational matters. Fourthly, most of teachers have known the functions of NEIS and recognized its convenience. Although they has not thought it reduced their work, they have realized it's convenient for dealing with statistics. Lastly, they think of NEIS as the essential system for the age of information, in spite of problems such as reveal of personal data and security. Therefore, we should keep eyes to problem of an invasion of human right. In addition, study deep into NEIS should be conducted with consistent security for the system. In order to it. technical and legal system should be carried out side by side.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.449-457
• /
• 2022

The chaperone practices is being applied to solve the problem of sexual harassment in clinics in medical institutions. Therefore, considering the characteristics of the radiation work and the application of the chaperone practices in the radiation work, this study is to analyze the requirements for the application of the chaperone practices and the impact that may occur on the job. From the end of 2021 to the beginning of 2022, a survey was conducted targeting radiologists in Daegu and Gyeongbuk, and about 52.9% of the surveys were analyzed. As a result of the analysis, the demand for the application of the chaperone practices was higher among women than men, the younger the age, the higher the degree, and the lower the age. Also, as for the job impact of the application of the chaperone practices, the higher the demand, the greater the reduction in sexual harassment and credibility. In other words, the younger the age and the higher the education, the higher the need for the chaperone practices, but it is thought that it is necessary to supplement the policy for job security and Employment stability before applying it. Therefore, when considering the application of the chaperone practices to radiation work in the future, it is judged that it is necessary to sufficiently collect opinions in advance to guarantee the job in the relevant occupation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.403-413
• /
• 2007

KREN(Korean Education Network), supported by government fur 20 years, had been operated and connected to many educational institutions from elementary schools to universities. From 2001, This network has been operated by a commercial network consignment organization and started to offer superb infrastructures to access various educational information conveniently. This network contributes development of Korean Information technology and promotes solidarity among educational institutions as well. Despite this achievement, KREN's effectiveness is not well recognized. Therefore, performance analysis study was carried out on KREN's achievement to verify its effectiveness, this study was to justify government's continuous support and also to find effective. This study was to justify government's continuous support and also to find effective ways of operations and maintenance fur the next step of KREN. Over 100 organizations were surveyed for performance analysis and we analyzed its results and anticipated effectiveness in this study. Cost, contribution, quality and performance were examined fur satisfaction analysis and each institution's number of students, network experiences were used as independent variables fer regression analysis to figure out effectiveness of the network. This study's result provides much information for further research which will help in the development of educational policies and maximizing KREN's effectiveness.