• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.55-63
• /
• 2003

In this study, an experimental research of grinding characteristics using super-abrasives for surface carburized and heat treated SCM415 materials, which were usually used to make a linear motion guide block and were comparatively hard-to-machine materials, was carried out. In order to conduct a high efficiency and a accuracy grinding of such materials, grinding processes using CBN (Cubic boron nitride) and 38P grinding wheels have been attempted on a surface grinding machine. The grindability according to each grinding conditions was evaluated by means of a grinding force, a surface roughness and a residual stress. The experimental methods and results were presented in this paper. And also, from a proposed truing method the CBN wheels that combined a copper and a break truer gave a full scope to the wheel's performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1533-1541
• /
• 1990

Cubic boron nitride (CBN) is known the second hardest material followed diamond and was provided industry as an abrasive grain in the late 1960's. Since the introduction of CBN, a large amount of research has been carried out to determine the best application condition for grinding operation. Despite the advantages in its characteristics, CBN has not yet gained full acceptance as more excellent abrasive grain than traditional one. The reason for this state is that the surface roughness ground by CBN is worse than by traditional one and dressing and truing is very difficult. This led user's resistance to the use of CBN as an abrasive grain. Present study is to investigate the cause of lower surface roughness ground by CBN single crystal abrasive grain comparing with traditional one.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.17-32
• /
• 2010

This review shows the design and the development of new $CO_2$-soluble hydrocarbon copolymers which can be used as effective stabilizers for successful dispersion polymerizations of bio-compatible materials in supercritical carbon dioxide ($scCO_2$). The basic concepts of supercritical fluid including its solvent properties and applications in polymer synthesis are described. We report the facile synthesis of highly soluble hydrocarbon based copolymers, prepared with good control via controlled free radical polymerization from readily accessible and commercially available monomers. The phase behaviour of these materials was monitored in pure $CO_2$ to investigate how the molecular weights and the composition of the copolymers affect their solubility in $CO_2$. Their activity as a stabilizer was then tested in dispersion polymerization of N-vinyl pyrrolidone in $CO_2$ at various reaction conditions to identify the key parameters required for a successful dispersion stabilization of growing PVP particles. Some prospective potentials of this research which can be applied in developing new polymer materials in an environmentally-friendly fashion for use in cosmetics are also discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.263-263
• /
• 2023

블랙아이스는 눈에 쉽게 구분되지 않아 많은 교통사고를 초래하고 있다. 한국교통연구원 교통사고분석시스템에 따르면, 2017년부터 2021년까지 5년간의 서리/결빙으로 인한 교통사고 사망자는 122명, 적설로 인한 교통사고 사망자는 40명으로, 블랙아이스는 적설에 비해 위험성이 높은 것으로 나타난다. 과거의 다양한 연구에서 블랙아이스 생성조건을 기압과 한기 축적등의 조건에서 예측해왔지만, 이러한 기상학적 모델은 봄철 해빙기의 일교차로 인한 눈의 해동과 재냉각과 같은 다양한 기상 조건에서의 블랙아이스 탐지가 어렵다는 한계가 있어 최근에는 이미지 판별과 딥러닝모델(YOLO 등)을 기반으로 한 센서가 제시되고 있다. 그러나, 이러한 방법은 충분한 컴퓨팅 자원이 뒷받침되어야 하며, 블랙아이스 탐지까지 걸리는 속도가 빠르지 못한 편으로, 블랙아이스 초입 구간에서의 제동에 취약하다는 잠재적인 약점을 가지고 있다. 그러므로 본 연구에서는 블랙아이스의 주 원인인 서리나 어는비가 발생하기 위해서 주변 공기가 이슬점 온도 이하, 노면온도와 이슬점이 어는점보다 낮아야 함을 이용, IoT 센서 모듈을 통해 Magnus 방정식으로 계산한 이슬점 온도와 노면 온도를 사용하는 이동식 블랙아이스 추정 장치를 제시한다. 본 장치는 대기압, 온도, 습도로부터 계산된 이슬점 온도와 노면 온도를 통한 서리발생 가능성과 대기 온도, 노면 온도를 통해 어는비의 발생환경 여부를 계산한다. 본 연구 결과를 통해 블랙아이스 추정과 기상정보 생산을 동시에 가능케 하며, 추정 결과를 통합 수집서버에 전송함으로서 운전자에게 전방 블랙아이스 위험 구간을 조기에 전달하는 시스템과 이를 관리하기 위한 인프라를 구축하여 운전 시 결빙 미끄러짐 사고를 저감하고자 한다.

• The Journal of Society for e-Business Studies
• /
• v.20 no.1
• /
• pp.137-151
• /
• 2015

Crowdfunding is a novel method for funding from many individuals using web based platform often in return for products or equity. It allows individual entrepreneurs to create diverse products and services. This thesis elaborates a theoretical foundation for identifying the factors that must have motivated the funders in sponsoring crowdfunding projects. Based on the motivation theory, the proposed research model is constructed with intrinsic and extrinsic motivations from relevant literatures. We also examined how different crowdfunding modes ('Keeping It All' and 'All or Nothing') moderate the proposed research model. Based on the survey from various crowdfunding service providers in Korea, this empirical study found that continuous participation in crowdfunding is positively correlated with factors such as enjoyment, familiarity, agency credibility and reward, while peer-influence shows negative correlation. Furthermore, moderating effects of funding modes significantly affect continuous participation. These empirical results contribute insights on the emerging phenomenon of crowdfunding from funders' perspectives and shed lights more on the ways that the actions of platform providers may affect their ability to receive entrepreneurial financing.

• The Korean Journal of Ecology
• /
• v.27 no.6 s.122
• /
• pp.383-390
• /
• 2004

This study was conducted in three sites, Si-Hwa Lake, Dongman and Seoman island and Janguyeop island, from march, 1999 to september, 2002. The behaviors of pre-breeding season, territorial behaviors, reproductive ecology, foraging sites and behaviors, and the competition of reproduction and foods between intraspecific or interspecific of Eurasian Oystercatcher (Haematopus ostralegus) were observed in each studying sites. The breeding of Eurasian Oystercatcher started on the middle of April in Si-Hwa Lake and on the middle of May in Dongman and Seoman island and Janguyeop island. For intension of pair bond on pre-breeding season, Eurasian Oystercatcher foraged with pair and behaved male-female chasing flight behavior. The pair foraged with male and female before copulation. If other pairs and individuals approached in feeding site of pair, this pair attacked them with piping calling and intruder chasing flight. If continuos serial behaviors were not observed, the discrimination of male-female chasing flight and intruder chasing flight was difficult. Territorial behaviors classified four types; butterfly flight, calling behavior, chasing behavior, fight behavior. The important foraging sites in Si-Hwa Lake are the land place in Daeboo island, tidal flat of Bangameori, tidal flat a front of a stationary net for catching fishes and tidal flat a front of a view station for bird watching. Eurasian Oystercatcher foraged at tidal flat on low water of the tide and foraged at feeding sites near island on flood tide in Dongman and Seoman island. Eurasian Oystercater in Janguyeop island usually foraged feeding sites near island, because water level was not different between low water of the tide and flood tide. Eurasian Oystercatcher competed on foods of intraspecific and interspecific. They chased for taking foods by force in feeding sites and drove out intruders in feeding sites. The foods interspecific competition happened with Black-tailed Gull (Larus crassirostris). Eurasian Oystercatcher was robbed of foods and attacked by Black-tailed Gull. The individual of food competition with Black-tailed Gull was low foods intake rate comparison with other feeding sites and this individual flied out other feeding sites.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.3
• /
• pp.41-66
• /
• 2017

The purpose of this research is to empirically trace the junctures of Yigye-gugok managed by Gwan-am Hong Gyeong-mo, a grandson of Yigye Hong Yang-ho who originally designed Yigye-gugok, while reviewing the features of the forms and patterns of gugok. The results of the research are as follows. 1. Ui-dong was part of the domain of the capital during the Chosun dynasty, which also is located in the city of Seoul as a matter of administrative zone. Likewisely, Yigye-gugok is taken as a special meaning for it was one and only gugok. Starting with Mangyeong Waterfall as the $1^{st}$ gok, Yigye follows through the $2^{nd}$ gok of Jeokchwibyeong Rock, the $3^{rd}$ gok of Chanunbong Peak, the $4^{th}$ gok of Jinuigang Rock, the $5^{th}$ gok of Okkyeongdae Rock, the $6^{th}$ gok of Wolyeongdam Pond, the $7^{th}$ gok of Tagyeongam Rock, the $8^{th}$ gok of Myeongoktan Stream, and the $9^{th}$ gok of Jaeganjeong Pavilion. Of these, Mangyeong Waterfall, Chanunbong Peak, and Okkyeongdae Rock are distinct for their locations in as much as their features, while estimated locations for Jinuigang Rock, Wolyeongdam Pond, Myeongoktan Stream, and Jaeganjeong Pavilion were discovered. However, Jeokchwibyeong Rock and Tagyeongam Rock demonstrated multiple locations in close resemblance to documentary literatures within secretive proximity, whereas geography, scenery, and sighted objects were considered to evaluate the 1st estimated location. Through these endeavored, it was possible to identify the shipping routes and structures for the total distance of 2.1km running from the $1^{st}$ gok to the $9^{th}$ gok, which nears Gwanam's description of 5ri(里), or approximately 1.96km for gugok. 2. Set towards the end of the $18^{th}$ century, Yigye-gugok originated from a series of work shaping the space of Hong Yang-ho's tomb into a space for the family. Comparing Yigye-gugok to other gugoks, numerous differences are apparent from beyond the rather more general format such as adjoining the $8^{th}$ gok while paving through the lower directions from the upper directions of the water. This gives rises to the interpretation such that Yigye-gugok was positioned to separate the doman of the family from those of the other families in power, thereby taking over Ui-dong. Yet, the aspect of the possession of the space lends itself to the determination that the location positioned at the $8^{th}$ gok above Mangyeongpok Waterfall representing Wooyi-dong was a consequence of the centrifugal space creation efforts. 3. While writings and poetic works were manufactured in such large quantities in Yigye-gugok whose products of setters and managers seemed intended towards gugok-do and letters carved on the rocks among others, there is yet a tremendous lack of visual media in the same respect. 'Yigye-gugok Daejacheop' Specimens of Handwriting offers the traces of Gwanam's attempts to engrave gakja at the food of Yigye-gugok. This research was able to ascertain that 'Yigye-gugok Daejacheop' Specimens of Handwriting was a product of Hong Yang-ho's collections maintained under the auspices of the National Central Museum, which are renowned for Song Shi-yeol's penmanship.