• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.81-82
• /
• 2013

This study has been mainly motivated to numerically model the supercritical mixing and combustion processes encountered in the liquid propellant rocket engines. In the present approach, turbulence is represented by the standard k-e model. To account for the real fluid effects, the propellant mixture properties are calculated by using generalized cubic equation of state. In order to realistically represent the turbulence-chemistry interaction in the turbulent nonpremixed flames, the flamelet approach based on the real fluid flamelet library has been adopted. Based on numerical results, the detailed discussions are made for the effects of swirl on flame structure of supercritical kerosene liquid propellant combustion.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.12
• /
• pp.1095-1105
• /
• 2005

Numerical analysis has been carried out to investigate transient turbulent convective heat transfer in a vertical tube for supercritical water near the thermodynamic critical point. Heat transfer and fluid flow in the tube we strongly coupled due to the large variations of thermodynamic and transport properties such as density, specific heat, and turbulent viscosity. As pressure in the tube approaches to the critical pressure, the properties variation with time becomes larger. Heat transfer coefficient rapidly decreases along the tube near the pseudocritical temperature at the tube wall for $P_R<1.2$. Stanton number variation with time is largely reduced in the region of gas-like phase in comparison with Nusselt number. Turbulent viscosity ratio close to the wall increases near the pseudocritical temperature and it gradually decreases with time.

• Korean Journal of Food Science and Technology
• /
• v.52 no.5
• /
• pp.516-523
• /
• 2020

Supercritical carbon dioxide (_SCO2) extraction was applied for the defatting of mealworm to prepare defatted powder (DP) and protein isolate (PI) and compare the process to press and hexane extraction, with respect to DP and PI physicochemical properties. _SCO2 DP was obtained by extracting 34.40% oil at 41.37 MPa, 40℃ for 180 min, and the product contained 71.66% crude protein, which is similar to that of hexane DP and higher than that of press DP. In using alkali protein extraction to prepare PI from DP, _SCO2 was as effective as hexane and better than press. _SCO2 produced brighter DP and PI than press, but not as much as hexane. Protein solubility was similar in all DP, with minimum values at pH 5. The highest water adsorption capacity was noticeable for _SCO2 PI, and _SCO2 DP showed an oil adsorption capacity comparable to that of hexane DP. _SCO2 DP and PI had better foaming capacity than press DP and PI and showed superior emulsion activity compared to others.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.208-211
• /
• 2016

Essential oils (EOs) extracted from plants possess various biological activities and have been considered as natural insecticides due to their potent insecticidal activities. In regard to develop natural insecticides, EOs are formulated as an emulsifiable concentrate and their acute toxicity against to fishes were determined in a static condition using Cyprinus carpio. Coriander EO was used as an active ingredient mixed with ethanol for solvent and various surface active agents. The tested EOs were obtained from a commercial market, and three different extractions were also undertaken to produce EO using steam distillation, solvent extraction, and supercritical fluid extraction. Among the emulsifiable concentrate including a commercial coriander EO, surface active agents such as Tween 80, sodium dodecyl benzene sulfonate (SDBS), and mixture of SDBS and Nonidet showed acute toxicity to the fish. With the three different EO extraction, coriander EO obtained from supercritical fluids with Triton X-100 exhibited acute toxicity to C. carpio. Taken together, Tetgitol and Nondet are considered as surface active agents for the emulsifiable formulation of coriander EO.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.611-619
• /
• 2019

This study was carried out to investigate fuel decomposition characteristics and coke formation according to types of endothermic fuels and methods of catalyst molding. Methylcyclohexane (MCH), n-dodecane, and exo-tetrahydrodipentadiene (exo-THDCP) were used as the endothermic fuels. As a catalyst, USY720 supported with platinum was used. It was manufactured by only using pressure to disk-type, or pelletized with a binder and a silica solution. The characteristics of the catalysts according to the molding method were analyzed by X-ray diffraction analysis, scanning electron microscopy, nitrogen adsorption-desorption isotherm, and ammonia temperature programmed desorption analysis. The reaction was carried out under conditions of high temperature and high pressure ($500^{\circ}C$, 50 bar) in which the fuel could exist in a supercritical state. The product was analyzed by gas chromatograph/mass spectrometer and the coke produced by the catalyst was analyzed by thermogravimetric analyzer. After the reaction, the composition of the products varied greatly depending on the structure of the fuel. In addition, the crystallinity and surface properties of the catalysts were not changed by the method of catalyst molding, but the changes of the acid sites and the pore characteristics were observed, which resulted in changes in the amount and composition of products and coke.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.439-445
• /
• 2014

This study aimed to determine the quality characteristics of ginseng seed oil as well as evaluate the efficacy of ginseng seed oil as a food resource. Ginseng seed oil was obtained by different extraction methods; from solvent extraction oil, supercritical fluid extraction oil, and screw pressed extraction oil. Total unsaturated fatty acids were present at 97.72~97.92%. Oleic acid (80.13~81.16%) was the highest, followed by linoleic acid (14.98~15.69%). The total phenol content (mg gallic acid equivalent/100 g oil) was higher in screw pressed extraction oil ($56.32{\pm}1.47$) compared to others. ${\gamma}$-Tocopherol was only present in ginseng seed oil and screw pressed extraction oil showed the highest levels of ${\gamma}$-tocopherol ($5.95{\pm}0.25$ mg/100g oil) among the tested samples. Screw pressed extraction oil showed the greatest oxidative stability with an induction time of 16.58 hours. Acid values and peroxide values of ginseng seed oil increased with increasing storage period. The total phenol and ${\gamma}$-tocopherol contents were higher in screw pressed extraction oil than in other ginseng seed oils, which suggests that screw pressed extraction oil has the greatest oxidative stability.

• Korean Journal of Acupuncture
• /
• v.37 no.2
• /
• pp.88-96
• /
• 2020

Objectives : The purpose of this study was to investigate the anti-oxidant and anti-aging effect of the seed of Euphorbia lathyris L. extracted by supercritical CO₂. Methods : Human dermal fibroblast cells dosed with the extract from Euphorbia lathyris L. were harvested and the intracellular proteome was analyzed to examine the expression of proteins related collagen synthesis pathway, metalloproteinases (MMPs), extracellular matrix (ECM)-cell interaction, cytokines, and antioxidant enzymes by 2-dimensional gel electrophoresis. Results : Fatty acid analysis of the extract from Euphorbia lathyris L. showed oleic acid was 84% and linoleic acid was 4.1%. Antioxidative effect was about 53% by beta carotene bleaching assay. In 2-dimensional polyacrylamide gel electrophoresis (2-D PAGE) analysis, fifteen protein changes in five mechanisms which were collagen synthesis pathway, MMPs, ECM-cell interaction, cytokines, and antioxidant enzymes were analyzed. Conclusions : This study suggests the supercritical extraction from the seed of Euphorbia lathyris L. could be used as anti-oxidant substances for pharmacopuncture.

• Journal of Environmental Science International
• /
• v.14 no.5
• /
• pp.513-520
• /
• 2005

For the destruction of toxic chlorinated organic compounds, this study proposes improved supercritical water oxidation method (multistep oxidation) using sodium nitrate as an oxidizer. This method solves the problems involved in the existing supercritical water oxidation method. Multistep oxidation means that $NaNO_3$ is oxidized to $N_2\;via\;NaNO_2$ and NO. Toxic and hard to destroy organic substances like para-dichlorobenzen(4-DCBz), polychlorinate biphenyl(PCB) ware oxidized to non toxic substances in a condition, in which rapid pressure and temperature rise is restrained as much as possible. 4-dichlorobenzene(4-DCBz) and Polychlorinate biphenyl(PCB) in condition$(450^{\circ}C,\;p_w=0.25g/cm^3,\;30min)$ Was discomposed perfectly.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.821-826
• /
• 2009

Due to environmental concerns $CO_2$ has been reintroduced as a potential candidate to replace HFCs in refrigeration systems. Oils are always required in a vapor-compression cycle, and thus actual working fluid in the system is $CO_2$-oil mixtures even though the oil concentrations are low at the heat exchangers and the expansion device. The cooling heat transfer coefficients for $CO_2$-oil mixtures under supercritical condition are required to designing of the gas cooler in the $CO_2$ refrigeration system properly. In the present study, the gas cooling heat transfer coefficients for $CO_2$-PEC9 was estimated by using the Gnileinski correlation, and the Kim and Ghajar model through the previous prediction models for the thermo-physical properties of $CO_2$-oil mixture. The Gnileinski correlation was used when the oil wt.% in the mixture is less than 1.0, and for the higher oil concentration the Kim and Ghajar model was applied. The estimated results agree with the experimental results conducted by the Dang et al.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.13-17
• /
• 2003

Cryogel and aerogel Pt-Ru/C were synthesized by the sol-gel process for the electrooxidation of methanol. From XRD analysis, it was found that the catalysts had highly dispersed Pt-Ru alloys on carbon support although high temperature treatments have been conducted. Electrocatalytic activities of 3 type aerogel catalysts were investigated in half cell experiments by cyclic voltammetry. Among them, Phloroglucinol-Formaldehyde(PF) type catalyst shows the highest activity. From the results of deactivation test for each catalysts, the aerogel catalysts are found to have excellent durability compared with those prepared by colloidal method.