• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.10-16
• /
• 1996

Ultrasonic motor is a motor driven by the stator via frictional contact forces generated from ultrasonic vibration of piezoelectric elements. In order to control the ultrasonic motor, it is essential to measure accurately the motor characteristics with respect to driving parameters such as frequency, voltage, phase difference and duty ratio of the driving signals. In this paper, a PC-interfaced evaluation device is developed, and the characteristic curves of the fabricated ultrasonic motor are measured with those parameters. All driving parameters are processed digitally. The developed evaluation device can facilitate charateristics measurements effectively, and provide a base for digital control of the ultrasonic motor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.757-760
• /
• 2004

Shaking beam을 이용한 초음파 선형모터는 모터 구동부에서 발생하는 타원궤적이 선형 slider 와 마찰이 되어 선형운동을 발생시킨다. 이러한 초음파 선형모터에서 설계변수는 모터의 효율과 추력(thrust force) 등 동특성을 결정한다. 특히 초음파 모터 동작부의 tip 과 선형 slider 의 contact point와 압착은 모터의 속도, 추력 동작 주파수, 효율에 직접적인 영향을 주는 중요한 parameter 로 작용된다. 본 연구에서는 모터와 선형 slider 의 압착과 contact point둥의 설계변수가 초음파 선형 모터의 성능에 주는 영향을 고찰하였다. 모터으구동부와 선형 slider 사이의 압착력 ($10N{\sim}50N$)과 4가지 곡률을 갖는 tip을 설계변수로 취하였다. Tip 의 형태에 따른 곡률과 모터 구동부와 선형 slider 사이의 압착력 변화에 따른 모터의 동작특성이 변화되는 것을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.24-24
• /
• 2022

토양 수분은 육상 생태계를 지배하는 핵심 변수로 널리 간주되어 왔다. 따라서 토양 수분을 모니터링하고 추정하는 것은 수문, 농업, 생화학적, 및 기후 역학을 평가하는 데 필수적이다. 그러나 최대 토양 접촉을 요구하는 기존의 토양 수분 모니터링 방법은, 토양 교란을 최소화하여 토양의 고유 특성을 보전하지 못하는 한계가 있다. 이 문제를 극복하기 위해 본 연구에서는 비접촉 초음파 시스템을 이용하여 토양 수분을 평가 방법을 개발하였다. 이 시스템은 공기-토양 조인트 절반 공간에서 누설 레일리파(Rayleigh wave)를 측정하도록 설계되었다. 토양 수분의 변화에 대한 누설 레일리파의 측정은 통제된 실험 설계에서 모래, 실트, 점토와 같은 세 가지 토양 유형에서 평가하였다. 본 연구 결과에서 세 가지 토양 사례 모두, 누설 레일리파의 에너지와 토양 수분 사이에 밀접한 관계가 있음을 보였다. 그러나 모래에서 얻은 동적 매개변수의 특성은 실트 및 점토의 특성과 다른 형태를 보였다. 이러한 결과는 미세한 토양 입자와 대조적으로 굵은 토양 입자는 증발 과정에서 감소된 토양 강도로 설명될 수 있다. 관측된 누설 레일리파에서 얻은 동적 매개변수를 기반으로 토양 수분을 평가하기 위해 랜덤 포레스트 모형을 이용하였다. 예측된 토양 수분의 정확도는 모든 데이터 및 토양 유형에 관계없이 높은 정확도를 보였다(R² ≥ 0.98, RMSE ≤ 0.0089 m³ m^-3). 즉, 본 연구에서는 레일리파가 토양 교란 없이 토양 수분 변화를 지속적으로 평가할 수 있는 큰 잠재력을 가지고 있음을 보여주었다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.134-142
• /
• 2016

In this paper, a method synthesizing speech signal using the 40 kHz ultrasonic signals reflected from the articulatory muscles was introduced and performance was evaluated. When the ultrasound signals are radiated to articulating face, the Doppler effects caused by movements of lips, jaw, and chin observed. The signals that have different frequencies from that of the transmitted signals are found in the received signals. These ADS (Acoustic-Doppler Signals) were used for estimating of the speech parameters in this study. Prior to synthesizing speech signal, a quantitative correlation analysis between ADS and speech signals was carried out on each frequency bin. According to the results, the feasibility of the ADS-based speech synthesis was validated. ADS-to-speech transformation was achieved by the joint Gaussian mixture model-based conversion rules. The experimental results from the 5 subjects showed that filter bank energy and LPC (Linear Predictive Coefficient) cepstrum coefficients are the optimal features for ADS, and speech, respectively. In the subjective evaluation where synthesized speech signals were obtained using the excitation sources extracted from original speech signals, it was confirmed that the ADS-to-speech conversion method yielded 72.2 % average recognition rates.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.471-478
• /
• 2002

초음파를 사과의 비파괴 품질판정에 이용하기 위한 기초연구로서 계측된 저장기간에 따른 사과의 초음파 특성과 본 연구에서 계측된 사과의 기계적 특성을 이용하여 초음파에 의한 사과의 탄성계수 및 생물체항복강도 예측모델을 개발하고자 하였으며, 결론은 다음과 같다. 1. UTM을 이용하여 사과의 기계적 특성치를 분석하여 생물체항복점, 생물체항복변형량, 생물체항복강도, 파괴점, 극한변형량, 극한강도 및 탄성계수 등을 구하였다. 2. 사과의 기본 물성, 초음파 특성과 기계적 특성값 들을 분석한 결과 사과의 질량, 체적, 시간영역의 진폭(PTP), 제3영역 에너지 스펙트럼 밀도함수가 기계적 특성 중 생물체항복강도, 탄성계수와 높은 상관성이 있는 것으로 나타났다. 3. 사과의 저장 기간, 질량, 체적, Peak-to-peak, 제3영역의 에너지값 등 5개의 독립변수를 가지는 다중선형회귀모형으로 사과의 탄성계수 및 생물체 항복강도 예측모형을 개발하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1070-1077
• /
• 2011

This paper is studied on the influence of machining conditions on weldability obtained by ultrasonic machining. The weldability estimation of dissimilar Ni-Cu sheets with the optimization of one-wavelength horn is confirmed by the use of ultrasonic machining. The optimal welding condition with tensile test by setting the ultrasonic machining parameters is suggested and the weldability is estimated by SEM observation and EDX-ray analysis. Experimental studies are worked with the measure of tensile strength and the analysis of SEM photograph after the ultrasonic machining of workpiece. Machining parameters of machining time, pressure, and amplitude are also applied to this paper.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.34-34
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial application with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristics of the pulse echo effects according to various change in welding conditions. This paper presents a new attempt to detect the bond strength of friction welds by ultrasonic. Instead of looking for a flaw or cracks at the interface, the new approach evaluates the coefficient by reflection which provides a single quantitative indicator involving the acoustic energy reflected at the interface. The objective of this study is to find the relationship between the reflection coefficients and the weld strength. Results of the bar-to-bar friction welding of aluminum to copper and stainless steel and such relationship investigation are presented and interpreted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.80-85
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial application with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristics of the pulse echo effects according to various change in welding conditions. This paper presents a new attempt to detect the bond strength of friction welds by ultrasonic. Instead of looking for a flaw or cracks at the interface, the new approach evaluates the coefficient by reflection which provides a single quantitative indicator involving the acoustic energy reflected at the interface. The objective of this study is to find the relationship between the reflection coefficients and the weld strength. Results of the bar-to-bar friction welding of aluminum to copper and stainless steel and such relationship investigation are presented and interpreted.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.307-312
• /
• 2001

Ultrasonic signals from Charpy impact test specimen have been analyzed in order to evaluate the integrity of reactor pressure vessel. Base and weld metal that were extracted from reactor vessel doting plant outages according to the schedule of the surveillance test required by the related regulations have been used and the ultrasonic test parameters including velocity, attenuation, etc. showed a close correlations with the amount of neutron irradiation for base metal, relatively homogeneous materials. This result showed certain possibility where a nondestructive method could be used to predict the fluence of the Irradiation due to neutron in nuclear reactor vessel materials.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.705-713
• /
• 2020

Arteriosclerosis is a disease in which blood circulation is impaired due to loss of elasticity as blood vessels become narrower, and is a potential cause of recently increasing cardiovascular and cerebrovascular diseases. Carotid ultrasound is used as a predictor of cardiovascular and cerebrovascular diseases by evaluating the degree of atherosclerosis. Therefore, this paper attempted to investigate the correlation between the increase in the thickness of the inner media and various clinical variables in carotid ultrasound. Patients with carotid ultrasound findings were classified into three stages: mild intima thickening, sclerosis, and significant stenosis. CAVI (Carotid Ankle Vascular Index: vascular age) data measured in the degree and physical characteristics of the carotid artery(gender, age, body mass index, blood pressure), blood test(total cholesterol, triglycerides, high-density lipoprotein, low-density lipoprotein, creatine phosphokinase, fasting blood sugar), and arteriosclerosis test were collected. It was confirmed that the carotid intima thickness was correlated with variables such as hypertension, hyperlipidemia, and BMI, and also correlated with the risk factors of cardiovascular disease as CAVI increased.