• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2009

Propagation of electromagnetic wave in the water or underground is very difficult because of the conductivity of the propagation materials. In this case, we usually use acoustic signal as ultrasonic but, it is not easy to transfer long distance with coherent method because of time varying multipath, doppler effect, and attenuations. So, we use noncoherent method as FSK to communicate between long distances. But, as the propagation speed of acoustic sound is very slow, the BW of the channel is narrow. It is very hard to guaranty the enough speed of communication like digital image data. In this paper, we proposed a new data communication protocol which can transmit multi-bit digital data with every single ping, and improve the data communication speed in the water.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.205-211
• /
• 2013

This paper studies on mechanical properties, fractures, and ultrasonic characteristics of Pure Titanium welds using ultrasonic attenuation. Ti specimen was made by using AR purge gas. When the titanium weld specimen is fractured, Tensile tests were conducted in order to observe the ultrasonic signal changes. A scanning electron microscope(SEM) was used to observe changes in failure surface and an ultrasonic normal probe with the central frequency of 4 MHz was used to obtain ultrasonic signals. As a result, the value of the mechanical properties in the weld zone was lower than that in the base zone and heat affected zone(HAZ) from Ti. Also the grain size in the weld zone was bigger than that in the weld zone and HAZ from Ti. Ultrasonic signals using a RMS method presents correlation between envelope area and the tensile strength. Consequently, the ultrasonic method could be potential tool for integrity evaluation of the Ti weld zone.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.2
• /
• pp.65-72
• /
• 2012

A defect analysis program for a composite motor case was developed to apply the ultrasonic signal processing method, based on the ultrasonic pulse-echo method. With the proposed defect analysis program, defects of FRP delamination and FRP/Rubber disbond in the composite motor case could be quantitatively measured. The defects detected in the composite motor case were in good agreement with the results measured with the computed tomography and video microscope. This paper described the development process of the defect analysis program to convert the ultrasonic test data into the C-Scan images.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.70-77
• /
• 2019

Breast ultrasound readings are very important to diagnose early breast cancer. In Ultrasonic inspection, it shows a significant difference in image quality depending on the ultrasonic equipment, and there is a large difference in diagnosis depending on the experience and skill of the inspector. Therefore, objective criteria are needed for accurate diagnosis and treatment. In this study, we analyzed texture characteristics by applying GLCM (Gray Level Co-occurrence Matrix) algorithm and extracted characteristic parameters and diagnosed breast cancer using neural network classifier. Breast ultrasound images were classified into normal, benign and malignant tumors and six texture parameters were extracted. Fourteen cases of normal, malignant and benign tumor diagnosed by mammography were studied by using the extracted six parameters and learning by multi - layer perceptron neural network back propagation learning method. As a result of classification using 51 normal images, 62 benign tumor images, and 74 malignant tumor images of the learned model, the classification rate was 95.2%.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.550-555
• /
• 2007

초음파 영상은 초음파 펄스를 이용하여 반사파를 수신하여 진단에 필요한 영상을 구성하는데 신호가 약해 질 경우 잡음이 발생하며 미세한 명암도 차이 등에 의해 분석과정에서 육안으로 인지하고 진단하는데 어려움이 있다. 특히 근골격계 검사를 위한 초음파 영상에서 근육 영역의 진단에 어려움을 준다. 따라서 본 논문에서는 초음파 영상에서 영상처리 기법을 이용하여 근육 영역을 검출할 수 있는 방법을 제안한다. 초음파 영상에서의 근육 영역검출은 피하지방층과 기타 영역 그리고 근육을 둘러싸고 있는 근육막 후보 영역을 검출한 후, 위치 정보와 형태학적 특징을 이용하여 최종적으로 근육막 내부 영역인 근육 영역을 검출한다. 제안된 방법의 근육막 후보 영역의 검출 과정은 개선된 히스토그램 스트레칭과 Mutiple연산으로 대비 차를 향상시키고 반복 이진화 기법을 적용한 후, 잡음에 의해 손실되거나 끊어진 근육막 영역을 거리 및 방향 분석을 이용하여 연결한 후에 근육막 후보 영역을 검출한다. 검출된 근육막 후보 영역의 형태학적 특징과 위치 정보를 이용하여 피하지방층과 기타 영역을 분류 한 후, 최종적으로 근육 영역을 검출한다. 실제 초음파 영상을 대상으로 제안된 근육 검출 방법을 적용하여 검출된 근육 영역과 전문의가 분석한 근육 영역을 비교한 결과, 제안된 근육 검출 방법이 전문의가 육안으로 분석한 근육영역과 근접하게 검출되어 본 논문에서 제안한 근육 영역 검출 방법이 효율적임을 확인할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.534-544
• /
• 2022

Medical ultrasound system has been widely used to visualize the lesion for diagnostics in most medical service site including hospitals and clinics thanks to its advantages such as real time operation, ease of use, safety. Among many signal processing blocks of the system, one of the most important part that governs the image quality is the beamformer, and technologies for this part has been continuously developed in long time. The synthetic aperture imaging method, that is one of the major technologies of beamforming, was introduced to maximize utilizing the information delivered from the patient's body through the probe, and contributed to breakthrough of the image quality since it was introduced in around 1990's, and evolved continuously in decades. This paper reviews and surveys the process of development of this technology and expects future evolution.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.391-399
• /
• 2005

Laser-generated ultrasonic inspection system is a non-contact scanning inspection device with high spatial resolution and wide bandwidth. The amplitude of laser-generated ultrasound is varied according to the energy of pulse laser and the surface conditions of an object where the CW measuring laser beam is pointing. In this paper, we correct the generating errors by measuring the energy of pulse laser beam and correct the measuring errors by extracting the gain information of laser interferometer at each time. h dynamic stabilizer is developed to stably scan on the surface of an object for an laser-generated ultrasonic inspection system. The developed system generates ultrasound after adaptively finding the maximum gain time of an laser interferometer and processes the signal in real time after digitization with high speed. In this paper, we describe hardware configuration and control algorithm to build a stable laser-generated ultrasonic inspection system. Also, we confirmed through experiments that the proposed correction method for the generating errors and measuring errors is effective to improve the performance of a system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1463-1466
• /
• 2005

상황인지로부터 알아 낼수 있는 여러가지 정보들 중에 하나가 위치정보이다. 위치인지는 어떠한 대상의 위치를 알아내는 것으로서 가장 대표적인 위치인지 시스템으로는 GPS 가 있다. 그러나 GPS 는 건물 내부에서 사용될 수 없는 단점을 지니고 있다. 이를 극복하기 위해 본 논문은 센서 네트워크 기반의 저전력 실내 위치인지 시스템 설계에 대해 기술한다. 구현된 실내 위치인지 시스템은 센서 네트워크 기반으로 설계되었다. 하드웨어 플랫폼은 모트를 기반으로 하고 있으며 운영체제는 Tiny OS 를 사용한다. 거리측정 방식은 RF 신호와 초음파 신호 사이의 시간차를 이용하고 위치측정은 삼각측량법을 이용하였다. 초음파를 이용한 다른 위치인지 시스템에 비해 저전력으로 동작한다는 점이 특징이며 위치추적이 정확하고 속도가 빠른 장점을 지니고 있다. 현재까지의 실내 위치인지 시스템은 몇가지 극복해야할 문제점들이 남아있지만 지속적인 연구를 통해 문제점들을 해결하면 홈 시큐리티나 오토메이션, 헬스케어 등과 연동하여 실내 환경에서 인간의 삶의 질 향상에 기여 할 수 있을 것이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1191-1194
• /
• 2002

해저면의 상태가 뻘, 모래, 자갈, 바위, 또는 기타 오물들의 퇴적 상태인지를 판단할 수 있다면 패류 서식지의 발견, 어류 양식장의 관리, 해저 생태계의 관리 등에 크게 도움을 받을 수 있다. 본 논문에서는 현재 대부분의 중소형 선박에도 설치되어 있는 어군 탐지기로부터의 초음파를 디지털 신호로 변환하여 해저 상태에 따른 패턴을 분석한 후, 패턴 데이터베이스에 저장하여, 실시간으로 해저면의 상태를 판별하기 위한 시스템에 대해 연구하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.333-339
• /
• 1999

It is well recognized that ultrasonic technique is one of the most common and reliable nondestructive evaluation techniques for quantitative estimation of defects in structures. For the quantitative and accurate estimation of internal defects. the characteristics of scattered ultrasonic wavefields must be understood. In this study. the scattered near-field and far-field due to a circular cavity embedded in infinite media subjected to incident SH-waves were calculated by the boundary element method. The frequency response of the scattered ultrasonic far-field was transformed into the time-domain signal by obtaining its inverse Fourier transform. It was found that the amplitude of time-domain signal decreases and its time delay increases as the distance between the detecting point of ultrasonic scattered field and the center of internal cavity increases.