• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.92-98
• /
• 2015

The physical effect induced by acoustic cavitation was investigated to accumulate basic data for the design of ultrasonic soil washing processes using aluminum foil erosion tests. A square aluminum foil was placed on the glass beads in the pyrex vessel submerged in the sonoreactor equipped with a 36 kHz ultrasound transducer module at the bottom. Cavitational erosion of foils was quantitatively analyzed for various glass bead diameter conditions (1, 2, and 4 mm), glass bead height conditions (5, 10, 15, and 20 mm), and water height conditions (5, 10, 15, and 20 mm). It was found that aluminum foil erosion significantly increased as the glass bead diameter increased and water height over the glass bead increased due to less attenuation of ultrasound and the optimization of sound field for cavitation. Moreover mechanical mixing was suggested to move constantly particles to the bottom area where the acoustic cavitation occurs most violently. It was because aluminium foil erosion by ultrasound transmitted through glass beads was relatively too weak.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.205-212
• /
• 2014

Ultrasound technology can be applied in various fields including environmental, energy, and material engineering processes. In this study the effect of liquid height/volume on calorimetric energy and sonochemical oxidation was investigated as one of the basic steps for the design of water/wastereater treatment sonoreactors. The liquid height was increased from 0 to $4{\lambda}$ by $1/4{\lambda}$ and it was found that both calorimetric energy and sonochemical oxidation were significantly increased at relatively high liquid height/volume where the power density was relatively low. The sonochemiluminescence (SCL) images for the visualization of the activity of cavitation also showed that larger and more stable active zone was formed with high SCL intensity at high liquid height/volume. Therefore, it was revealed that sonoreactors for water/wasterwater treatment could be significantly effective in terms of removal efficiency and energy consumption.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.199-208
• /
• 1994

In this study, the ultrasound which provides the properties of mixing, and surface cleaning effect, the increase of the effective reaction surface area and the enhancement of the effective collision frequency, was used to enhance the recovering efficiency of Cu from the Cu-ion containning waste water. The ultrasonic reactor used in this study was designed and constructed for improving the disadvantage of the existing ultrasonic reactor. From the experimental result and its analysis, we obtained following conclusions. 1. The ultrasound increased the rate of electrochemical deposition to 582.2% in maximum at the condition of $0.1M-CuSO_4$, and 2.1 V-overpotential. 2. The enhancement effect of ultrasound induced by the reduction of diffusion layer thickness was 277.8% in maximum and induced by the other effect except for the reduction effect of the diffusion layer thickness was 253.6% in maximum at $0.1M-CuSO_4$ and 2.1V overpotential. 3. This study gave the possibility of the scale-up of ultrasonic reactor and in particular, ultrasonic reactor would be effective in the treatment of waste water containning a low concentration of Cu ion.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.322-328
• /
• 2009

Emulsion polymerization of octamethylcyclotetrasiloxane (OMCTS) was conducted under ultrasonic irradiation. Two sources of ultrasound with different intensities and frequencies of 20 KHz and 40 KHz were used for horn and bath type reactor, respectively. A combined process of horn and bath was also investigated. The effectiveness of the reaction systems was investigated by measuring conversion as well as intrinsic viscosity of the products. The influence of reaction temperature and sonication time on the progress of sonochemical polymerization was examined. It was found that conversion of greater than 80% and high viscosity were achieved within a few minutes of sonication in a horn type reactor, however, conversion and viscosity showed maximum values depending upon the sonication time. In a bath type reactor where a relatively weak intensity was maintained, longer duration time of more than one hour of sonication was required to reach a high level of conversion and viscosity. Compared with the horn type system, the conversion and viscosity in the bath type reactor were increased along with the sonication time. When the polymerization was carried out in a combined system of horn and bath, the evolution of conversion and molecular weight was quite different from the other cases. For the given geometry of reaction system, acoustic analysis using a commercial software was carried out and the results were correlated with experimental observation.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.358-363
• /
• 1993

The effect of ultrasound on the acid hydrolysis of inulin was studied under significantly mild reaction conditions, at which sugar degradation products were not detected. Reaction conditions were i the range of 50~$60^{\circ}C$ and 0.1~0.3%(w/w) of HCl concentrations. The effects of reactor position inside water bath and mechanical agitation under ultrasound were investigated. The production rates of fructose with/without ultrasound irradiation were compared. The activation energies for both control and ultrasound reaction were the same, i. e., 25kca1/mo1, and ultrasound enhancement was average 22%.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.105-108
• /
• 1986

Ultrasound(50KHz) accelerated the reduction reaction of aromatic nitro group to aromatic amino group in high yield with mild condition using iron, hydrazine hydrate and activated carbon under room temperature and atmospheric pressure. The activated carbon has been used as a mixing material to highly active metals. However, aromatic nitro group does not reduce at all only with iron-hydrazine witliout adding activated carbon even under ultrasonic irradiation. We also discovered that the conversion yield from nitro group to amino group is directly proportional to the amount of activated carbon.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.642-650
• /
• 2005

This research investigates the effects of adding oxidants such as $Fe^0$, $Fe^{2+}$, and ${S_2O_8}^{2-}$ in the sonolysis of 1,4-D. Results indicate that the degradation could be divided into two steps (initiation and acceleration) kinetically. The initial portion agreed with zero-order expression, while the second portion could be fitted with pseudo first-order expression. In the presence of ${HCO_3}^-$, as a radical scavenger, the degradations of 1,4-D and TOC were suppressed, indicating that OH radical is an important factor in the sonolysis. The overall degradation efficiency of 79.0% in the sonolysis was achieved within 200 minutes. While $Fe^0$, $Fe^{2+}$, and ${S_2O_8}^{2-}$ were individually combined with sonication, the degradation efficiency of 1,4-D increased 18.6%, 19.1%, and 16.5% after 200 min, respectively. The addition of oxidants not only changed the kinetic model from zero to pseudo first order at initiation step, but also increased the rate constants in the acceleration step. The addition of oxidants in the sonolysis of 1,4-D also improved the mineralization of 1,4-D, however, the effect of adding oxidants on the rate increase was similar regardless of the oxidants.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.628-631
• /
• 2017

An experimental study of the combustion characteristics according to the equivalence ratio of hydrocarbon fuel/air premixture excited by ultrasonic standing wave are presented. The image of the propagating flame was acquired using a high-speed camera, and the combustion characteristics of each fuel were closely observed through image processing. it was conformed that ultrasonic standing wave has been found to stimulate the combustion reaction in the stoichiometric ratio.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.504-511
• /
• 2006

Polysilanes with organic substituents such as methyl and phenyl were synthesized by Wurtz dechlorination-condensation reactions using ultrasonic from organochlorosilanes. The yields were compared with the results of thermal dechlorination-condensation reactions. Properties such as thermogravimetric analysis and photoreactivity were investigated for the possibility of applications.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.38-48
• /
• 2021

In this study, we determine the optimal process conditions for selectively recovering Si from a solar cell surface by removal of impurities (Al, Zn, Ag, etc.). To selectively recover Si from solar cells, leaching is performed using HCl solution and an ultrasonic cleaner. After leaching, the solar cells are washed using distilled water and dried in an oven. Decompression filtration is performed on the HCl solution, and ICP-OES (Inductively Coupled Plasma Optical Emission spectroscopy) full scan analysis is performed on the filtered solution. Furthermore, XRD (X-ray powder diffraction), XRF (X-ray fluorescence), and ICP-OES are performed on the dried solar cells after crushing, and the purity and recovery rate of Si are obtained. In this experiment, the concentration of acid solution, reaction temperature, reaction time, and ultrasonic intensity are considered as variables. The results show that the optimal process conditions for the selective recovery of Si from the solar cells are as follows: the concentration of acid solution = 3 M HCl, reaction temperature = 60℃, reaction time = 120 min, and ultrasonic intensity = 150 W. Further, the Si purity and recovery rate are 99.85 and 99.24%, respectively.