• Journal of Life Science
• /
• v.23 no.7
• /
• pp.913-918
• /
• 2013

The applicability of the ultrasonic wave method to the extraction of useful components from seaweeds was investigated. Extracts from freeze-dried Ecklonia cava powder were prepared with hot water ($65^{\circ}C$), water ($24^{\circ}C$), 50% ethanol, and 100% ethanol, and ultrasonic extraction was also performed. The content of phenolic compounds and the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and tyrosinase inhibitory activity of the extracts were analyzed, and differences in the data obtained by the ultrasonic extraction and the traditional extraction methods were compared. The phenolic content in the E. cava extract by ultrasonic extraction (142.80 mg/g) was approximately 14 times higher than the phenolic content in the hot water extract (10.03 mg/g). The DPPH radical scavenging and the tyrosinase inhibitory activities of the ultrasonic extract were approximately 4 times and 14 times higher than the hot water extracts, respectively. The correlation between the phenolic content and the DPPH radical scavenging activity ($R^2$=99.47) and between the phenolic content and the tyrosinase inhibitory activity ($R^2$=99.99) was very high. These results indicate that ultrasonic extraction is more suitable than traditional extraction for the extraction of useful components from E. cava.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.493-494
• /
• 2008

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.225-233
• /
• 1997

This study is performed to establish a non-destructive evaluation method for metal matrix composite using ultrasonic technique. The specimen is made of SiC/AC8A metal matrix composite by squeeze-casting method. Three kinds or reinforced particles are prepared as 4.86, 8.09 and $11.44{\mu}m$ to investigate the effect of size on the mechanical and ultrasonic properties of metal matrix composite. In addition, four different volume fractions (14, 22.5, 27.5, 35%) of reinforced particles are prepared per each size to examine the effect of volume fraction on the ultrasonic properties. From this specimen, the availability and precision of measurement of Young's modulus are examined and the evaluation method for microstructure of metar matrix composite using the speed of sound and attenuation factor is also reviewed. The results show that the Young's modulus measured by ultrasonic method is as effective as that measured by mechanical method. It is also known that the size and volume fraction of reinforced fiber are precisely evaluated using the speed of sound and attenuation factor.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.3 no.2
• /
• pp.68-78
• /
• 2001

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.290-295
• /
• 2000

The joint treatment of concrete is one of the technical problems in top down construction method. Joints created with the top down construction result in serious weakness from the aspects of both structural and water-barrier function. Ultrasonic method was used for the inspection of top down construction joints of a various column in SRC structure in this study. The advantages and limitations of this method for non-destructive inspection in top down construction joints are investigated. As a result, it has been verified that the semi-direct measurement method is more effective than the other methods for detecting the voids of construction joints using ultrasonic method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.270-276
• /
• 1999

Fourier transform has been one of the most commonly used tools in study of frequency characteristics of signal. However, based on the Fourier transform. it is hard to tell whether a signal's frequency contents evolve in time or not. Recently, to overcome Fourier transform fault. not to represent non-stationary signal, time-frequency analysis methods are developed and those can represent informations of signal's time and frequency at the same time. In this study we analysed ultrasonic signal for degraded SUS 316 with time-frequency analysis method. In particular the methods such as short time Fourier(STFT) and Wigner-Ville distribution(WVD) were used to extract frequency contents and characteristics from ultrasonic signals.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.22-30
• /
• 2001

Composites with various layer constructions involving the ratio of S/P were produced from wood strands(S) and particles(P) (Cryptomeria japonica D.Don) to measure various Young's moduli and anisotropy by ultrasonics. As a result, static Young's moduli of composites were almost same as dynamic Young's moduli obtained from natural frequency. However, these were smaller than those evaluated from ultrasonic wave propagation velocity. The differences between propagation velocity of the parallel(${\parallel}$) and perpendicular(${\bot}$) in-plane direction resulted in a tendency of anisotropy. The tendency of anisotropy was larger in three-layer constructions than in seven-layer constructions. The differences of strand surface layers showed larger values than those of particle surface layers. Also, composites with higher weight ratio of strand had a tendency to propagate rapidly in each direction. In contrast to these results, the propagation velocity in the thickness direction had a tendency to propagate rapidly in composites with particle surface layers and the lower weight ratio of strand.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.3-11
• /
• 1998

본 논문에서는 분포정수선로의 간단한 모델을 이용해서, 외부에서 진동을 가했을 때 에 뼈 표면에서 발생하는 굴곡파의 전파속도와 종파의 전파속도를 구할 수 있는 새로운 측 정원리를 제안했다. 이 측정원리를 이용해서, 봉(brass, polymethylmethacrylate)표면에 발생 하는 정재파에 대한 속도의 공간분포를 laser Doppler법으로 측정해서, 각각의 주파수에 대 한 전파속도를 구했다. 이 새로운 측정방법은 in vivo에서 초음파 Doppler법을 이용해서 뼈 의 이상(골다공증, osteoporosis)진단의 가능성을 제시했다.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.171-179
• /
• 2013

An automated ultrasonic velocity measurement system adopting pulse-echo-overlap (PEO) method has been constructed, which is known to be a precise and versatile method. It has been applied to velocity measurements for 5 kinds of engineering plastic cores and compared to first arrival picking (FAP) method. Because it needs multiple reflected waves and waves travel at least 4 times longer than FAP, PEO has basic restriction on sample length measurable. Velocities measured by PEO showed slightly lower than that by FAP, which comes from damping and diffusive characteristics of the samples as the wave travels longer distance in PEO. PEO, however, can measure velocities automatically by cross-correlating the first echo to the second or third echo, so that it can exclude the operator-oriented errors. Once measurable, PEO shows essentially higher repeatability and reproducibility than FAP. PEO system can diminish random noises by stacking multiple measurements. If it changes the experimental conditions such as temperature, saturation and so forth, the automated PEO system in this study can be applied to monitoring the velocity changes with respect to the parameter changes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.89-96
• /
• 2012

The rubber side could be contaminated using the existing pulse echo method because the ultrasonic wave was incident on the rubber side from the interior of the steel motor case, which could lead to the critical disbond defect. To develop the test method which can be replaced the existing method, the ultrasonic wave was incident on steel face of the steel/rubber adhesive test block. Rubber resonance frequencies measured from the steel/rubber adhesive test block were in good agreement with theoretically predicted rubber resonance frequencies. This paper was described about the ultrasonic resonance method to convert the rubber resonance frequency into the rubber thickness.