• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.278-283
• /
• 2003

This study was carried out to examine the nitrogen removal rate of a subsurface-flow treatment wetland system which was constructed on floodplain of the Kwangju River from May to June 2001. Its dimensions were 29m in length, 9m in width and 0.65m in depth. A bottom layer of 45cm in depth was filled with crushed granite with about $15{\sim}30\;mm$ in diameter and a middle layer of 10cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds (Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju River flowed into it via a pipe by gravity flow and its effluent was funneled back into the river. The height of reed stems was 44.2 cm in July 2001 and 75.3cm in September 2001. The number of stems was increased from $80\;stems/m^2$ in July 2001 to $136\;stems/m^2$ in September 2001. Volume and water quality of inflow and outflow were analyzed from July 2001 through December 2001. Inflow and outflow averaged 40.0 and $39.2\;m^3/day$, respectively. Hydraulic detention time was about 1.5 days. Average nitrogen uptake by reeds was $69.31\;N\;mg/m^2/day$. Removal rate of $NO_3-N$, $NH_3-N$, T-N averaged 195.58, 53.65, and $628.44\;mg/m^2/day$, respectively. Changes of $NO_3-N$ and $NH_3-N$ abatement rates were closely related to those of wetland temperatures. The lower removal rate of nitrogen species compared with that of subsurface-flow wetlands operating in North America could be attributed to the initial stage of the system and inclusion of two cold months into the six-month monitoring period. Increase of standing density of reeds within a few years will develop both root zones suitable for the nitrification of ammonia and surface layer substrates beneficial to the denitrification of nitrates into nitrogen gases, which may lead to increment in the nitrogen retention rate.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.6
• /
• pp.20-31
• /
• 2005

Three dimensional Monte-Carlo simulations of non-ergodic transport of a lion-reactive solute plume by steady-state groundwater flow under a uniform mean velocity in isotropic heterogeneous aquifers were conducted. The log-normally distributed hydraulic conductivity, K(x), is modeled as a random field. Significant efforts are made to reduce tile simulation uncertainties. Ensemble averages of the second spatial moments of the plume and plume centroid variances were simulated with 1600 Monte Carlo runs for three variances of log K, ${\sigma}_Y^2=0.09,\;0.23$, and 0.46, and three dimensionless lengths of line plume sources normal to the mean velocity. The simulated second spatial moment and the plume centroid variance in longitudinal direction fit well to the first order theoretical results while the simulated transverse moments are generally larger than the first order results. The first order theoretical results significantly underestimated the simulated dimensionless transverse moments for the aquifers of large ${\sigma}_Y^2$ and large dimensionless time. The ergodic condition for the second spatial moments is far from reaching in all cases simulated, and transport In transverse directions may reach ergodic condition much slower than that in longitudinal direction. The evolution of the contaminant transported in a heterogeneous aquifer is not affected by the shape of the initial plume but affected mainly by the degree of the heterogeneity and the size of the initial plume.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.587-597
• /
• 2004

Over the past 20 years, great strides have been made in research regarding the mechanisms involved in the progression of carious lesions, but new equipment and research tools need to be developed to continue these advancements in caries research. Various methods have been applied to reduce the incidence of carious lesions, which have led to a significant decrease in the number of occlusal caries, but a concurrent increase in the proportion of proximal carious lesions. New diagnostic equipment has been developed to detect early stage carious lesions, and these have demonstrated excellent laboratory results and show promise in clinical applications. The research presented here examines the efficacy of the newly developed $DIFOTI^{TM}$ system in detecting proximal carious lesions compared to traditional intraoral exam and bitewing radiography, possible problems or deficiencies of using the system in clinic, possible improvements that can be made to the system, and the efficacy of detecting early, reversible carious lesions that can be remineralized by preventative fluoride applications. The subject pool consisted of 23 grammer school age patients just prior to entering the mixed dentition phase. Each patient was given a thorough oral examination, radiographic examination consisting of bitewing radiographs of the posterior teeth, and $DIFOTI^{TM}$ examination of the anterior and posterior teeth. Each examination was carried out two times by two examiners, and the data were statistically analyzed. The results are as follows: 1. The mean alpha value of reliability test of the visual oral examination was as follows; occlusal surface was 0.8470. mesial surface was 0.6430, distal surface was 0.5727. lingual surface was 0.2807 and distal surface was 0.2339. When the examination was limited to posterior teeth, the mean alpha value was as follows; occlusal surface was 0.8577, distal surface was 0.8211, lingual surface was 0.7728, buccal surface was 0.7152 and mesial surface was 0.6782. 2. The alpha value of reliability test of the radiographic analysis of carious lesions of the occlusal, mesial, and distal surfaces was 0.8500. 3. The alpha value of reliability test of the $DIFOTI^{TM}$ diagnostic analysis of carious lesions of the occlusal, buccal, lingual, mesial, and distal surfaces was determined to be 0.7917. 4. The $DIFOTI^{TM}$ diagnostic system was found to be the most accurate means of detecting occlusal, buccal, and lingual surface carious lesions (p<0.05), while mesial and distal proximal carious lesions were most accurately assessed using bitewing radiography (p<0.05).

• Journal of Nutrition and Health
• /
• v.47 no.2
• /
• pp.124-133
• /
• 2014

Purpose: The current study was designed for development of a simplified malnutrition screening tool (SMST) for hospitalized patients using readily available laboratory and patient information and for evaluation of its reliability compared to well-established tools, such as PGSGA and NRS-2002. Methods: Anthropometric and biochemical measurements, as well as a few subjective assessments, of 903 patients who were preclassified by their nutritional status according to PGSGA were analyzed. Among them, a combination of factors, including age, BMI, albumin, cholesterol, total protein, hematocrit, and changes in body weight and food intake, were statistically selected as variables for SMST. Results: According to SMST, 620 patients (68.7%) were classified as the normal group and 283 patients (31.3%) were classified as the malnutrition group. Significant differences in age, albumin, TLC, BMI, hemoglobin, hematocrit, total protein, cholesterol, and length of stay were observed between the two groups. For inter-methods reliability, the screening results by SMST were compared with those by PGSGA and NRS-2002. The comparison with PGSGA and NRS-2002 showed 'Substantial agreement' (sensitivity 94.4%, specificity 88.4%, ${\kappa}$ = 0.747) and 'Moderate agreement' (sensitivity 96.1%, specificity 79.5%, ${\kappa}$ = 0.505), respectively, indicating that SMST held high inter-methods reliability. Conclusion: In conclusion, SMST, based on readily available laboratory and patient information and simple subjective assessments on changes in food intake and body weight, may be a useful alternative tool with a simple but reliable risk index, especially in resource-limited domestic hospitals.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1141-1151
• /
• 2007

In this paper through Honam high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21cm to 40cm diminishing to a gentle straight line, distortion of X axis varies 14cm to 29cm. Through a revision, the deviation value between the coordinates were 6mm to 9mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey(10cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.177-182
• /
• 1983

Direct conversion of starchy materials to single cell protein of Sporobolomyces holsaticus FRI Y-5 was investigated. Effect of yeast extract concentration on its cell growth showed that it could utilize more of starch in the medium containing 2.5 g/l of yeast extract. In case of jar fermentor culture, the specific growth rate and cell yield of Sp. holsaticus on soluble starch were calculated to be $0.14\;hr^{-1}$ and 0.425, respectively and its maximum cell concentration was 13.4 g/l. After 80 hr of incubation time, 45.96% of starch was consumed and 45.1% of relative blue value was decreased. Reducing sugars in the starch medium seemed to increase from 4.06 g/l to 6.08 g/l and then to decrease. During fermentor culture, pH of medium was almost not changed in the range of $pH\;7.0{\pm}0.5$. The optimal temperature and pH of Sp. holsaticus amylase activity were $40^{\circ}C$ and pH 7.5, respectively. It was shown from the effect of Tapioca starch concentration on the cell growth that the optimal concentration of Tapioca starch for Sp. holsaticus was lower than that of soluble starch. FRI Y-5 cells settled much slower than Sp. holsaticus IFO 1032 cells and the viscosity vs cell concentration relationship was related to be linear.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.2
• /
• pp.91-101
• /
• 2006

Researches on services of vehicles have been mainly focused on how to provide useful information and entertainment for an in-vehicle driver. However, the needs are appreciably increased for more advanced services that help drivers to check and manage their vehicles conveniently, without requiring drivers to attach to their vehicles. It is a sort of ubiquitous computing, providing an intelligent interactive services for human at any time and any where. In this paper, we present an intelligent vehicle information system to enable a driver to remotely diagnose and control a vehicle via CDMA communication network connected to the Internet. The system improves mobility for diagnosis and control of vehicle by implementing a cut and call back mechanism, which allows the vehicle terminal to have access to the information server on the Internet via CDMA call. No matter where the driver is, he can obtain the remote diagnosis and control services on the web browser without any additional application installation. Design methodology is introduced and evaluation results are analyzed for the CDMA-based intelligent vehicle information system. The experimental results show that the response time of the vehicle terminal to a web client request is 10.302 seconds at the beginning and 646.44ms thereafter. The average response time of CAN sensor node to a vehicle terminal request is 6.669ms.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.2
• /
• pp.53-64
• /
• 2014

This study sets it's face to define effects of the various loading periods in normal consolidation area on clay's compression and long-term consolidation characteristics through a laboratory test using homogeneous remolded clay. Moreover, by carrying out a long-term consolidation test which diversifies initial consolidation applicable to effective overburden loading in the various loading period. This study intended to suggest the method predicting the final settlement on the basis of loading periods by comparing and analyzing compression curve's characteristics according to loading weight of each stage and increase in loading period when carrying out the standard consolidation test. From the test results, the study shows that as of the soft clay's compression characteristics on the basis of various loading periods, preconsolidation load has a tendency to be decreased slightly as the loading period is getting more and more longer at each step after initial consolidation load puts on the remolded clay which is caused by secondary consolidation's increase in the latter part of each phase. And those effects have an weaker influence on compression index in normal consolidation area at the same time as secondary consolidation brought out quasi-overconsolidation and stabilization of clay's structure, have an influence re-compression index is increased in overconsolidation area on the other hand.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.239-251
• /
• 2012

This study aims to seek the policies and the plans for the successful small business start-up through an exploratory study about the factors affecting the success rate of small business start-up. To measure the performance of the start-up business(sales revenue, net profit, and outcome expectancy), the characteristics of founders (experience, psychological characteristics) and the preparation of small business start-up were measured as independent variables and the self-efficacy was measured as a parameter. 427 small business owners were targeted and structured self-administered questionnaires were collected from them. For the data process, a multiple regression analysis by SPSS 18.0 was conducted. The findings demonstrated the experience in the same business, the need for achievement, the risk-taking propensity, the preparation period for business start-up had a significant effect on self-efficacy, and experience of failure and the ratio of net worth had a significant effect on sales revenue and net profit, and the locus of control had a significant effect on outcome expectancy through the self-efficacy, a parameter. It was also noted the self-efficacy of small business owners and the business performance varied depending on the characteristics of them and the preparation process of the business start-up. Based on the those findings, the theoretical and practical implications were discussed and the suggestions about the limits of the study, future policies and studies were made.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.115-128
• /
• 2012

This paper investigates the effects of diffuser on the acoustical parameters in music hall with consideration of the result of scattering coefficient measurement. A scale model hall of 600 seats with orchestra shell was used for experiments. The materials of 1:50 scale model was chosen through absorption coefficient measurement based on ISO 354. The model was matched to the computer simulation model in terms of reverberation time. In order to evaluate the effect of diffuser location, the measurements were accomplished with and without diffusers according to 7 configurations by diffuser-installed region; sidewall, balcony front, ceiling and so on. The following acoustical parameters were extracted from each measurement case; Reverberation time (RT), Early decay time (EDT), Clarity (C80), Center time (Ts), Sound strength (G) and Temporal diffusion (TD) from the auto-correlation function (ACF) of impulse responses. As a result, the absorption power and diffusion power were increased with number of diffusers. Accordingly RT, EDT and G were decreased by diffuser and the redirection of reflections was occurred briskly. Averaged TD was 6.05 to 6.30 by measurement cases. RT was found to be the most related factor to diffusion power (R = 0.94). The correlation between TD and EDT was high (R = 0.73). In addition, the effects of diffuser-installed location were discussed in terms of acoustical parameter variation.