• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.1-8
• /
• 2002

In order to study electric properties of (Pb$\_$0.9/La$\_$0.1/)Ti$\_$0.975/O$_3$(PLT (10)) films with varying excess lead concentration (7.5, 10, 12.5, 15 ㏖% excess lead), the PLT films were deposited by sol-gel process. DTA analyses reveal that the crystallization temperature of the precursor powers decreased with increasing amount of excess lead. XRD patterns of PLT reveal pure perovskite structure and the preferred orientation increased with increasing Pb content in the films. With increasing amount of excess P$\_$b/, the relative permittivity ($\xi$$\_$r/) increased and leakage current density at 100 ㎸/cm transformed 4.01$\times$10$\^$-5/, 2.42$\times$10$\^$-6/, 1.27$\times$10$\^$-6/, 1.56$\times$10$\^$-6/A/㎠ respectively. In the results of hysteresis loops measured at 166 kV/cm, the remanent polarization (P$\_$r/) and the coercive field (E$\_$c) are 6.36$\mu$C/cm and 58.7 ㎸/cm, respectively (at 12.5 ㏖% excess P$\_$b/) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after 10$\^$9/ cycles./TEX>) With increasing amount of excess Pb, the remanent polarization for PLT thin film degraded to about 44%, 27%, 15%, 16% of the initial value after $10^{9}$ cycles.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.937-943
• /
• 2017

This study was performed to investigate the changes between free and bound forms of bioactive compounds in germinated adzuki bean. Adzuki bean was germinated at $25^{\circ}C$ for 6 days, and then free and bound forms of bioactive compounds were extracted. Total free polyphenol and flavonoid contents in of raw adzuki bean increased from 0.91 mg/g and 0.60 mg/g in before germination to 2.37 mg/g and 3.03 mg/g in at 6 days after germination, respectively. Bound polyphenol, flavonoid, and phenolic acid contents also increased with increasing germination periods, whereas bound polyphenol and flavonoid contents slightly reduced in at 2 days after germination. The total phenolic acid contents, including ferulic acid, veratric acid, hesperidin, salicylic acid, naringenin, and hesperidin, increased during germination, and germination process can convert compounds to phenolic acid via anabolism and catabolism. Total anthocyanin and anthocyanidin contents of adzuki bean decreased during germination due to hydration by water during soaking or enzyme activation of anthocyanase during germination. These results suggest that the germination process increased utilization of functional compounds such as phenolic compound and isoflavones in black soybean.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.78-84
• /
• 1994

Yield response of tomato to nitrogen and potassium fertilizer and the balance of the two elements were determined in salt-accumulated greenhouse soil to improve the efficiency of fertilizer appiication. The response of tomato yield to nitrogen and potassium fertilizer application was not significant. The current parameters such as OM and $K/{\sqrt{Ca+Mg}}$ that were used to determine the level of nitrogen and potassium fertilizer in open field were not suitable in salt-accumulated greenhouse soil condition. The temporal and spatial distribution of $NO_3{^-}-N$showed the same pattern to those of $Cl^-$ ion that is non-reactive with soil, while the content of Ex. K was extraordinarily high in soil after harvesting of tomato, which had experienced relatively dry condition during harvesting time. The loss of $NO_3{^-}-N$ and Ex. K out of 28cm below the soil surface was 2~5 and 1.5~3.5 times greater than the amount of nitrogen and potassium uptake by the plant.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.99-109
• /
• 2009

Fine-size exposed aggregate portland cement concrete pavements (FEACP) have surface texture of exposed aggregate by removing upper 2$\sim$3mm mortar of surface of which curing is delayed by using delay-setting agent. FEACPs have advantages of maintaining low-noise and adequate skid-resistance level during the performance period than general portland cement concrete pavements. It is necessary to ensure the durability environmental loading to prevent unexpected distress during the service life of FEACP. In the process of curing, volume change accompanied change in by moisture and temperature could be an important cause of crack in concrete to construct for successful FEACP, The use of chloride containing deicer may accelerate defects of concrete pavement, such as crack and scaling. This study aim to evaluate environmental loading resistance of FEACP, based on the estimation of shrinkage-crack-control-capability by moisture evaporation and scaling by deicer in freeze-thaw reaction.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.67-77
• /
• 2012

O Having a highly reliable plan for the process and estimating an accurate construction period during the early stages of a construction project can prevent falsifying the plan and reduce the occurrence of construction delays. Moreover, it allows a succession of swift and accurate decisions to happen. The difficulty in obtaining an accurate estimate of the construction period is especially prominent in high-rise building projects because the works involved are very complicated and costly. As such, it is important that research is done to find out the impacts a reliable plan and good estimate of the construction period can bring with regards to the monthly work efficiency and success of a high-rise building project. However, due to the difference in climatic conditions at high altitude and surface level, the current way of calculating work efficiency in a typical project is inaccurate for a high-rise building project. With that, this paper aims to compute the work efficiency with height, taking into consideration the change in climatic elements at different working heights. A comparison of the results according to the climatic features of each city can also be done in this paper. According to the results calculated in work altitudes, the work efficiency in Busan falls the most. On the other hands, the work efficiency in Seoul falls the least. The reason these results are shown is the influence of wind speed at high altitude. The estimation of work efficiency at high altitude would be used for estimating construction period, feasibility studies, and selecting a city of high-rise building projects.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.490-502
• /
• 2014

This study investigates the cultivation processes of major nuts and fruits such as Ginkgo biloba L., Vitis coignetiae, Actinidia arguta Planch, Rubus coreanus Miq., and Rubus crataegifolius and analyzes standard income in order to provide foundational data necessary to make reasonable policies related with the criteria of compensating the loss of forest products or diagnosis of forestry management. According to the research results, the types of cultivation by items can be largely divided into open field culture and mountainous culture. Regarding the average annual income per unit area (3.3) by items, the open field culture of Ginkgo biloba L. was 1,060 Won, mountainous culture of Ginkgo biloba L. was 618 Won, open field culture of Vitis coignetiae was 5,891 Won, mountainous culture of Actinidia arguta Planch was 8,113 Won, open field culture of Rubus coreanus Miq. was 14,701 Won, and open field culture of Rubus crataegifolius was 17,482 Won or so; thus, the average annual income of Rubus coreanus Miq. and Rubus crataegifolius was very higher than that of the other items. In particular, because the production of Rubus crataegifolius starts two years after the planting and they rely on family labor mainly for the cultivation, the expenses for employment and labor were analyzed to be low. In addition, the analysis shows that at most of the nuts and fruits cultivation, initial investment costs for facilities or seedlings occupy a great part as about 30% averagely out of the management cost, so it is thought that the government should provide proper support to vitalize the cultivation.

• Composites Research
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2005

Salt water spray and immersion tests were experimentally conducted for over 6 months to investigate the durability of glass fabric/phenolic composites under salt water environment. Mechanical properties such as tensile properties, flexural properties, and shear properties were evaluated and thermal analysis properties such as storage shear modulus, loss shear moduls, and tan 6 were obtained through a DMA. A change in chemical structures was analyzed through a FTIR. According to the results, mechanical properties and thermal analysis properties were sensitive to salt water environment and these properties began to degrade in increasing in exposure times. However, tensile and flexural moduli started to decrease and then slightly increase as increasing in exposure times due to plasticization and crosslinking in matrix as well as physical swelling in composites. Beyond a certain exposure times, these properties began to decrease as further increasing in exposure times. Also the shape and location of peaks in FTIR curves were insensitive to exposure times, but the intensity of peaks would be. finally we found that the durability of glass fabric/phenolic composites were affected on salt water immersion environment rather than salt water spray environment.

• Korean Journal of Food Science and Technology
• /
• v.6 no.2
• /
• pp.109-115
• /
• 1974

Milssal is a polished, partially gelatinized pressed wheat grain and it is being consumed in Korea. This study was conducted to establish 2 practical means of providing needed lysine to the Korean population through fortification of Milssal. The results are summarized as follow: Lysine infusion of Milssal was significantly higher than polished wheat grain and affected by such factors as time and concentration of infusion solution. Cooking characteristics including water-uptake ratio and expanded volume were apparently better than polished wheat. After conducting the series of fortification experiments under actual manufacturing conditions. a reasonable process was chosen. In the developed process. lysine HCl solution was sprayed instead of water to the cleaned and debranned wheat grains during the regular wetting process. There was no differences in appearance and taste of Milssal before and after fortification. Fortification of the protein of Milssal with lysine has been found to bring a significant improvement in the growth rate of rats and the protein efficiency ratio. Stability remained relatively high throughout the storage period(90 days at $10{\sim}20^{\circ}C$ or 30 days at $37^{\circ}C$).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.821-825
• /
• 2005

본 연구에서는 홍수조절 용 저수지의 예비방류 시행을 충분히 효과적으로 시행하고 강우종료 후에도 충분한 이수용량이 확보되도록 실시간 강우자료를 이용한 저수지 유입량 예측모형을 개발하였다. 사전예보(기상청 등)에 의한 총 예상강우량과 선행강우량, 현재 저수지 수위를 입력자료로 저수지 유입 총량과 수위변화량을 계산하여 홍수조절 응 저수지의 초기수위저하 및 하류 하도의 홍수방어를 사전에 대비할 수 있는 자료를 제시하였다. 또한, 유역을 하나의 통합시스템으로 구성하고 실제 강우가 시작되면 매시간 현시간 이후 강우가 중단된다는 가정 하에 현시점까지의 우량주상도를 통합시스템에 적용하여 이후 저수지 유입량을 예측하였다. 무한천 예당저수지에 적용하였으며 통합시스템의 구성은 저수지유역을 10개 소유역으로 분할하고 소유역별 홍수유출량은 Clark의 유역추적법, 하도구간은 Muskingum의 하도홍수추적 방법으로 계산되도록 하였다. 그리고 홍수유출시스템 내에는 강우관측소별 티센가중치에 따라 소유역별 평균강우량이 자동으로 입력되도록 하였으며, 예측정확도를 위해 현시간 이전까지 매시간마다 저수지의 수위변동과 실제 방류량으로부터 실측유입량을 산정하여 모형의 매개변수가 자동 보정되도록 하였다. 1995년 8월 23일$\~$8월 26일과 1999년 8월 2일$\~$8월 4일의 집중호우에 대하여 적용한 결과 모형의 예측정확도는 신뢰수준에 있었으며, 이와 같은 자료는 장수형 등(2005)이 제시한 효율적 저수지 운영관리 시스템과 하나로 통합되어 하류 하도의 통수능력을 고려한 홍수방어능력을 극대화한 예비방류의 시행과 강우종료 후에도 이수용량에는 손실이 없는 저수지의 관리방안의 지침이 되는데 효율적이라 판단되었다. 방법을 개발하여 개선시킬 필요성이 있다.>$4.3\%$로 가장 근접한 결과를 나타내었으며, 총 유출량에서도 각각 $7.8\%,\;13.2\%$의 오차율을 가지는 것으로 분석되어 타 모형에 비해 실유량과의 차가 가장 적은 것으로 모의되었다. 향후 도시유출을 모의하는 데 가장 근사한 유출량을 산정할 수 있는 근거가 될 것이며, 도시재해 저감대책을 수립하는데 기여할 수 있을 것이라 판단된다.로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.879-883
• /
• 2005

우리나라는 하천유역의 도시화 추세 속에 불투수층의 증가로 빗물의 일시 유출로 인한 홍수발생으로 많은 인명과 재산피해가 발생하고 있어 방재적 차원에서의 수자원관리가 시급한 실정이다. 또한, 초기 빗물과 합류식 하수도의 월류수에 의한 하천, 호소, 및 습지의 수질오염문제도 많이 발생하고 있다. 이러한 문제를 해결하기 위하여 콘크리트로 제작된 PC 지하식 빗물저류시설로서 상부의 공간은 공원, 운동장, 주차장 등 다양하게 이용하면서 방재와 치수를 가능케 할 수 있다. 또한, PC 콘크리트 빗물저류조는 현장 타설이 아닌 PC콘크리트 블록을 현장에서 조립하여 시공기간이 대폭적으로 단축되고, 작업환경 및 주변환경을 개선시킬 수 있다. 또한, 지하수의 보전, 회복을 위한 빗물저류 침투 시설 역할도 수행하여 비상용수를 확보하고 여름철 홍수 시 빗물을 가두어 재해를 방지하는 등의 다목적 시설로 활용된다. 지하 매립형 빗물저류조는 기존의 암거설계기준을 참조하여 일본의 내진설계 기준을 반영하였으며, 고강도 콘크리트를 사용하여 강도 또한 뛰어나다. 그리고 시공이 간편하고 공기의 단축에 탁월한 효과를 나타내며, 빗물저류조 설치는 다음과 같은 특징이 있다. 1. 지하저류형 빗물저류조 시설로 설계되어 토지의 효과적인 이용이 기대된다. 2. 공사기간이 짧아 경제적이다. 3. 안정된 구조체이다. 4. 부지의 형태에 맞춘 시공이 가능하다. 5. 소규모에서 대규모의 유수지까지 광범위하게 대응이 가능하다. 6. 방재역할 수행 및 빗물이용의 역할을 담당할 수 있다. 7. 불투수층이 증가하고 있는 도시지역에서 적극 활용가능하다.로 판단된다.한 예비방류의 시행과 강우종료 후에도 이수용량에는 손실이 없는 저수지의 관리방안의 지침이 되는데 효율적이라 판단되었다. 방법을 개발하여 개선시킬 필요성이 있다.>$4.3\%$로 가장 근접한 결과를 나타내었으며, 총 유출량에서도 각각 $7.8\%,\;13.2\%$의 오차율을 가지는 것으로 분석되어 타 모형에 비해 실유량과의 차가 가장 적은 것으로 모의되었다. 향후 도시유출을 모의하는 데 가장 근사한 유출량을 산정할 수 있는 근거가 될 것이며, 도시재해 저감대책을 수립하는데 기여할 수 있을 것이라 판단된다.로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며