• Title/Summary/Keyword: 초기속도장

Search Result 152, Processing Time 0.027 seconds

Performance Analysis of Wireless Communication Interface System Module Combined LED Light Device (LED조명 디바이스를 접목한 무선통신 인터페이스 시스템 모듈 성능 분석)

  • Jang, Tae-Soo;Lee, Jun-Myung;Park, Keon-Jun;Kim, Yong-Kab
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.11
    • /
    • pp.2431-2436
    • /
    • 2012
  • This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

Rheological Properties of Rehydrated Suspensions of Freeze Dried Kochujang Powders (동결건조 분말고추장의 재수화시 리올로지 특성)

  • Kim, Suk-Shin;Chang, Kyu-Seob;Yoon, Han-Kyo;Lee, Sang-Kyu;Lee, Shin-Young
    • Korean Journal of Food Science and Technology
    • /
    • v.19 no.2
    • /
    • pp.81-88
    • /
    • 1987
  • Rheological properties of rehydrated suspensions of two kinds of freeze dried Kochujang powders, processed at different freezing rates, were compared with raw Kochujang using Brookfield wide-gap rotational viscometer at $25^{\circ}C-60^{\circ}C$. Shear rates ranged from $0.1965\;sec^{-1}$ to $1.9650\;sec^{-1}$ and solid content ranged from 47% to 56%. Rehydrated suspensions of quickly frozen Kochujang powder and slowly frozen Kochujang powder, and raw Kochujang exhibited pseudoplastic behaviors with yield stress and presented thixotropic properties which followed the second-order kinetic behavior proposed by Tiu. Suspensions of Kochujang powders exhibited considerably higher decaying rates than raw Kochujang. The dependency of the equilibrium structure parameter on the shear rate was weak, and there were no significant differences among the values of structure parameters of three samples. The temperature dependency of the apparent viscosity of Kochujang suspension was fully expressed by Arrhenius equation and activation energies of suspensions of quickly frozen Kochujang powder and slowly frozen Kochujang powder, and raw Kochujang were 2.21, 2.18, and 2.32 Kcal/g.mole respectively. Consistency indices of three samples increased with solid content and decreased with temperature. Flow behavior indices of three samples showed no considerable dependency on the temperature and solid content. There were no significant differences in the rheological properties between two Kochujang powders.

  • PDF

Growth and Grain Yield under Different Direct Seeding Cultures in Rice (벼 직파재배 유형에 따른 생육 및 수량)

  • Choi, Weon-Young;Kim, Sang-Su;Sin, Hyun-Tak;Cho, Soo-Yeon;Choi, Sun-Young
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.42 no.1
    • /
    • pp.14-21
    • /
    • 1997
  • This experiment was conducted to identify the growth and yield differences in rice cultural types: Broadcasting on flooded paddy surface(BF), drilling on flooded paddy surface(DF), puddled-soil drill seeding(PD), drill seeding on dried paddy flat(DD), and machine transplanting of lO-day old seedling(MT) at National Honam Agricultural Experiment Station in 1995. Among the cultural types of direct seeding, the number of seedling stand showed high in order of DD>BF>DF>PD. Tillering at early growth stage was faster in MT and effective tiller showed higher in MT than in direct seeding. Growth duration from seeding to heading was longer in direct seeding than in MT for 2-13 days of Dongjinbyeo and 10-18 days of Nonganbyeo. Root distribution ratio at the surface soil revealed high in order of BF>DF>PD>DD and MT. Culm wall thickness of 4th internode was thicker in machine transplanting of 10-day old seedling than in direct seeding, and the depth of buried culm showed deep by turns of MT> DD>PD>DF and BF. The height of center gravity and moment related to lodging revealed higher in direct seeding than machine transplanting that resulted high lodging index by turns of BF>DF>DD> PD among the direct seeding cultural type. Lodging was occured seriously in the order of BF>DF>PD>DD =MT in Dongjinbyeo but wasn't significantly different in Nonganbyeo among the cultural type. The yield components and grain yield showed varietal differences but was not significantly different between in MT and in direct seeding, and among cultural types of direct seeding.

  • PDF

Effect of the Piling Work Noise on the Behavior of Snakehead (Channa argus) in the Aquafarm (양식 가물치 (Channa argus)의 행동에 미치는 파일작업 소음의 영향에 관한 연구)

  • SHIN Hyeon Ok
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.28 no.4
    • /
    • pp.492-502
    • /
    • 1995
  • This paper describes the relationship between the behavior of the snakehead ( Channa arps) of 44cm long and the environmental noise levels due to the piling work. The experiment is conducted in the aquafarm located near Asan lake, Pyongtaek in 1993. The fish trajectory is obtained by a biotelemetry system in which a pulsed ultrasonic pinger attached onto the dorsal is tracked three dimensionally, and the noise and the vibration levels both in air and in water are measured. The results of this study are as follows: 1) The noise levels in water and in air and the vibration level measured at a distance of 90m from the noise source, increased by 36.5dB $(re\;l{\mu}Pa)$, 2308$(re\;0.0002{\mu}bar)$ and $5.9{\mu}m$ repectively compared to the levers before piling. 2) The highest variation of the swimming speed was observed right after the piling works and the width of variation decreased with the elapsed time. The average speeds of the fish before and during the works were measured as 0.8 times and 1.1 times of the body length, respectively. 3) It is found that the fish escapes into the mud of the aquafarm when a heavy shock wave occurred. Consequently, the heavy shock by the piling works could produce a considerably unfavorable effect to the fish.

  • PDF

1H NMR Kinetic Studies for Degradation of Nitramine Explosives Using PdO Nanoparticle (PdO 나노입자를 이용한 니트라민 폭발물 분해반응에 대한 1H NMR 반응속도연구)

  • Kye, Young-Sik;Kumbier, Mathew;Kim, Dongwook;Harbison, Gerard S.;Langell, Marjorie A.
    • Applied Chemistry for Engineering
    • /
    • v.33 no.3
    • /
    • pp.302-308
    • /
    • 2022
  • The PdO nanoparticle with large surface area was selected to solve the environmental pollution problem at fire range caused by high energy explosives research department explosive (RDX) and high melting explosive (HMX). By simulating water pollution, RDX and HMX nitramine explosives were dissolved in water, followed by the degradation reaction at 313 K by adding PdO. In order to measure the degradation reaction rate of explosives, 1H NMR was used, which can monitor the reaction rate without losing sample during reaction, and observe the progress of the reaction through the spectrum. The results showed that the degradation of RDX and HMX by PdO nanoparticles are pseudo-first order reaction. The degradation of explosives compounds were observed via the chemical shift and peak intensity analysis of NMR peaks. The measured rate constants for these reactions of RDX and HMX were 2.10 × 10-2 and 6.35 × 10-4 h-1, respectively. This study showed that the application of PdO nanoparticles for explosives degradation is a feasible option.

A Numerical Study on Smoke Behavior of Fishing Vessel Engine Room (어선 기관실의 연기 거동에 관한 수치해석 연구)

  • JANG, Ho-Sung;JI, Sang-Won
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.5
    • /
    • pp.683-690
    • /
    • 2021
  • The ventilation system of the engine room of a ship is generally installed to supply the combustion air necessary for the internal combustion engine and to remove the heat source generated in the engine room, and it must satisfy the international standard (ISO 8861) for the design conditions and calculation standards for the ventilation of the ship engine room. The response delay of the ventilation system including the fire detector is affected by the airflow formed inside the area and the location of the fire detector. In this study, to improve the initial fire detection response speed of a fire detector installed on a fishing vessel and to maintain the sensitivity of the installed detector, the smoke behavior was simulated using the air flow field inside the engine room, the amount of combustion air in the internal combustion engine, and the internal pressure of the engine room as variables. Analysis of the simulation results showed that reducing the flow rate in the air flow field and increasing the vortex by reducing the internal pressure of the engine room and installing a smoke curtain would accelerate the rise of the ceiling of the smoke component and improve the smoke detector response speed and ventilation system.

Development of Panel-Based Rapid Aerodynamic Analysis Method Considering Propeller Effect (프로펠러 효과를 반영 가능한 패널 기반 신속 공력 해석 기법 개발)

  • Tai, Myungsik;Lee, Yebin;Oh, Sejong;Shin, Jeongwoo;Lim, Joosup;Park, Donghun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.49 no.2
    • /
    • pp.107-120
    • /
    • 2021
  • Electric-powered distributed propulsion aircraft possess a complex wake flow and mutual interference with the airframe, due to the use of many propellers. Accordingly, in the early design stage, rapid aerodynamic and load analysis considering the effect of propellers for various configurations and flight conditions are required. In this study, an efficient panel-based aerodynamic analysis method that can take into account the propeller effects is developed and validated. The induced velocity field in the region of propeller wake is calculated based on Actuator Disk Theory (ADT) and is considered as the boundary condition at the vehicle's surface in the three-dimensional steady source-doublet panel method. Analyses are carried out by selecting an isolated propeller of the Korea Aerospace Research Institute (KARI)'s Quad Tilt Propeller (QTP) aircraft and the propeller-wing configuration of the former experimental study as benchmark problems. Through comparisons with the results of computational fluid dynamics (CFD) based on actuator methods, the wake velocity of propeller and the changes in the aerodynamic load distribution of the wing due to the propeller operation are validated. The method is applied to the analysis of the Optional Piloted Personal Aerial Vehicle (OPPAV) and QTP, and the practicality and validity of the method are confirmed through comparison and analysis of the computational time and results with CFD.

An Exploratory Study on the Industry/Market Characteristics of the 'Hyper-Growing Companies' and the Firm Strategies: A Focus on Firms with more than Annual Revenue of 100 Million dollars from 'Inc. the 5,000 Fastest-Growing Private Companies in America' (초고성장 기업의 산업/시장 특성과 전략 선택에 대한 탐색적 연구: 'Inc. the 5,000 Fastest-Growing Private Companies in America' 기업 중 연간 매출액 1억 달러 이상 기업을 중심으로)

  • Lee, Young-Dall;Oh, Soyoung
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.16 no.2
    • /
    • pp.51-78
    • /
    • 2021
  • Followed by 'start-up', the theme of 'scale-up' has been considered as an important agenda in both corporate and policy spheres. In particular, although it is a term commonly used in industry and policy fields, even a conceptual definition has not been achieved from the academic perspective. "Corporate Growth" in the academic aspect and "Business Growth" in the practical management field have different understandings (Achtenhagen et al., 2010). Previous research on corporate growth has not departed from Penrose(1959)'s "Firm as a bundle of resources" and "the role of managers". Based on the theory and background of economics, existing research has mainly examined factors that contribute to firms' growth and their growth patterns. Comparatively, we lack knowledge on the firms' growth with a focus on 'annual revenue growth rate'. In the early stage of the firms, they tend to exhibit a high growth rate as it started with a lower level of annual revenue. However, when the firms reach annual revenue of more than 100 billion KRW, a threshold to be classified as a 'middle-standing enterprise' by Korean standards, they are unlikely to reach a high level of revenue growth rate. In our study, we used our sample of 333 companies (6.7% out of 5,000 'fastest-growing' companies) which reached 15% of the compound annual growth rate in the last three years with more than USD 100 million. It shows that sustaining 'high-growth' above a certain firm size is difficult. The study focuses on firms with annual revenue of more than $100 billion (approximately 120 billion KRW) from the 'Inc. 2020 fast-growing companies 5,000' list. The companies have been categorized into 1) Fast-growing companies (revenue CAGR 15%~40% between 2016 and 2019), 2) Hyper-growing companies (40%~99.9%), and 3) Super-growing (100% or more) with in-depth analysis of each group's characteristics. Also, the relationship between the revenue growth rate, individual company's strategy choice (market orientation, generic strategy, growth strategy, pioneer strategy), industry/market environment, and firm age is investigated with a quantitative approach. Through conducting the study, it aims to provide a reference to the 'Hyper-Growing Model' that combines the paths and factors of growth strategies. For policymakers, our study intends to provide a reference to which factors or environmental variables should be considered for 'optimal effective combinations' to promote firms' growth.

In Search of Corporate Growth and Scale-up in the Entrepreneurial Context: What Affects the Growth of Enterprise Value, the Pace of Growth, and the Effectiveness of Growth. (기업가적 컨텍스트에서 기업 성장과 스케일업 연구: 기업가치의 성장, 성장의 속도, 성장의 효과성에 영향을 미치는 요인)

  • Lee, Young-Dal;Oh, Soyoung
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.16 no.4
    • /
    • pp.25-58
    • /
    • 2021
  • This study investigated the corporate growth with more emphasis on longitudinal characteristics, not the results of companies with relatively more emphasis on cross-sectional, in the 21st-century entrepreneurial context. As of the end of 2019, sampled 479 global unicorn companies, and 333 high-growth companies with revenue of more than $100 million among 5,000 private companies in the U.S. with a compound annual growth rate (CAGR) exceeding 15% for the past three years. They were examined with 3 perspectives in terms of corporate growth that 1) the growth of enterprise value, 2) the pace of growth, and 3) the effectiveness of growth. As a result of our study, the corporate growth of the perspective of creating enterprise value had a relatively higher relationship with the characteristics of industries and markets. The pace of growth was more fully explained by the characteristics of the industry and the market environment and the choice of strategies that make up a valid combination. In addition, growth in terms of the effectiveness of corporate performance was influenced by the choice of strategy, the characteristics of the industry and market environment, and its business age, the proxy variable of resource accumulation, comprehensively. This study through a sample based on companies with an enterprise value of more than $1 billion and annual revenue of more than $100 million can be a valid reference in terms of creating milestones and roadmaps for scale-up of early-stage startups, particularly in terms of practitioners' point of view. It also provides a critical reference for overcoming the limitations of mainstream theories of the 20th century and developing the theory of corporate growth that fits the 21st-century entrepreneurial context.

Efficient Algorithms for Multicommodity Network Flow Problems Applied to Communications Networks (다품종 네트워크의 효율적인 알고리즘 개발 - 정보통신 네트워크에의 적용 -)

  • 윤석진;장경수
    • The Journal of Information Technology
    • /
    • v.3 no.2
    • /
    • pp.73-85
    • /
    • 2000
  • The efficient algorithms are suggested in this study for solving the multicommodity network flow problems applied to Communications Systems. These problems are typical NP-complete optimization problems that require integer solution and in which the computational complexity increases numerically in appropriate with the problem size. Although the suggested algorithms are not absolutely optimal, they are developed for computationally efficient and produce near-optimal and primal integral solutions. We supplement the traditional Lagrangian method with a price-directive decomposition. It proceeded as follows. First, A primal heuristic from which good initial feasible solutions can be obtained is developed. Second, the dual is initialized using marginal values from the primal heuristic. Generally, the Lagrangian optimization is conducted from a naive dual solution which is set as ${\lambda}=0$. The dual optimization converged very slowly because these values have sort of gaps from the optimum. Better dual solutions improve the primal solution, and better primal bounds improve the step size used by the dual optimization. Third, a limitation that the Lagrangian decomposition approach has Is dealt with. Because this method is dual based, the solution need not converge to the optimal solution in the multicommodity network problem. So as to adjust relaxed solution to a feasible one, we made efficient re-allocation heuristic. In addition, the computational performances of various versions of the developed algorithms are compared and evaluated. First, commercial LP software, LINGO 4.0 extended version for LINDO system is utilized for the purpose of implementation that is robust and efficient. Tested problem sets are generated randomly Numerical results on randomly generated examples demonstrate that our algorithm is near-optimal (< 2% from the optimum) and has a quite computational efficiency.

  • PDF