• Title/Summary/Keyword: 초기속도장

Search Result 152, Processing Time 0.046 seconds

Feasibility of Powdered MSWI Ash Melted Slag as a Seed Crystal of crystallization reaction for the Removal of Phosphorus from Sewage (하수중 인제거를 위한 정석탈인반응의 정석재로서 소각분말 용융슬래그의 이용 가능성 평가)

  • Kim, Choong Gon;Shin, Hyun Gon;Kim, Seung Won
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.21 no.1
    • /
    • pp.69-75
    • /
    • 2013
  • This study is a fundamental research to test the applicability of powdered MSWI(Municipal Solid Waste Incinerator) ash melted slag as a seed Crystal for crystallization reaction. Powdered ash melted slag was melted at $1100^{\circ}C$ and ground to lesser than 0.35mm. According to the result of the tests, calcium, enough for crystallization reaction, was eluted from powdered ash melted slag. Moreover, sample(Phosphorus concentration is under 10 mg/L), more than 90% of Phosphorus can be removed. So we rectify the Phosphorus concentration to 100 mg/L. Alkalinity, being well known that it interferes crystallization reaction, effect was studied for synthetic solution(100 mg/L initial Phosphorus concentration, 50 mg/L calcium, pH 8, 1% powdered ash melted slag dosage). For this result, we know that Phosphorus removal is hindered by alkalinity. In addition, the effect of reaction temperature was performed at the same method. The reaction velocity was increased through raising the reaction temperature.

Effect of Water Temperature and Packing Type on Quality of Fresh-cut Chicory (세척수 온도와 포장 형태에 따른 신선편이 치커리의 품질 변화)

  • Chang, Min-Sun;Kim, Gun-Hee;Kim, Byeong-Sam
    • Journal of Food Hygiene and Safety
    • /
    • v.22 no.4
    • /
    • pp.279-287
    • /
    • 2007
  • Quality attributes of fresh-cut chicory (Clchorium intybus L.var. foliosum) treated with hydrocooling and packing type were investigated in terms of weight loss, respiration, vitamin C content, microbial load and sensory properties during storage at $4^{\circ}C\;and\;10^{\circ}C$. Fresh chicory was trimmed and washed 3 times with cold water $(1^{\circ}C,\;5^{\circ}C)$ and tap water $(10^{\circ}C)$ for 30 sec and then packaged in polypropylene (PP) film bag and polyethylene terephthalate (PETE) tray, and stored for 9 days at $4^{\circ}C\;and\;10^{\circ}C$. Weight loss was decreased by washing and packing generally. Respiration rate was increased slowly in the storage at $4^{\circ}C$. Vitamin C content of chicory packaged within PETE tray were decreased gradually during storage at $4^{\circ}C$. Hydrocooling and packing within PETE tray treatments resulted in approximately 1-2 log CFU/g reduction of microbial load.

The Study on the Crystal Growing of Mn-Zn Ferrite Single Crystals by Floating Zone Method (Floating Zone법에 의한 Mn-Zn Ferrite 단결정성장에 관한 연구)

  • 정재우;오근호
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.2 no.1
    • /
    • pp.10-19
    • /
    • 1992
  • Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

  • PDF

DYNAMIC MODEL DEVELOPMENT FOR INTERPLANETARY NAVIGATION (행성탐사 항행해 결정을 위한 동역학 모델 개발)

  • Park, Eun-Seo;Song, Young-Joo;Yoo, Sung-Moon;Park, Sang-Young;Choi, Kyu-Hong;Yoon, Jae-Cheol;Yim, Jo-Ryeong;Choi, Joon-Min;Kim, Byung-Kyo
    • Journal of Astronomy and Space Sciences
    • /
    • v.22 no.4
    • /
    • pp.463-472
    • /
    • 2005
  • In this paper, the dynamic model development for interplanetary navigation has been discussed. The Cowell method for special perturbation theories was employed to develop an interplanetary trajectory propagator including the perturbations due to geopotential, the Earth's dynamic polar motion, the gravity of the Sun, the Moon and the other planets in the solar system, the relativistic effect of the Sun, solar radiation pressure, and atmospheric drag. The equations of motion in dynamic model were numerically integrated using Adams-Cowell 11th order predictor-corrector method. To compare the influences of each perturbation, trajectory propagation was performed using initial transfer orbit elements of the Mars Express mission launched in 2003, because it can be the criterion to choose proper perturbation models for navigation upon required accuracy. To investigate the performance of dynamic model developed, it was tested whether the spacecraft can reach the Mars. The interplanetary navigation tool developed in this study demonstrated the spacecraft entering the Mars SOI(Sphere of Influence) and its velocity .elative to the Mars was less than the escape velocity of the Mars, hence, the spacecraft can arrive at the target planet. The obtained results were also verified by using the AGI Satellite Tool Kit. It is concluded that the developed program is suitable for supporting interplanetary spacecraft mission for a future Korean Mars mission.

Growth Rate of Bacillus cereus and Heat Resistance of its Spores (Bacillus cereus균(菌)의 증식속도(增殖速度)와 포자(胞子)의 내열성(耐熱性)에 관(關)한 연구(硏究))

  • Lee, Myeong-Sook;Chang, Dong-Suck
    • Korean Journal of Food Science and Technology
    • /
    • v.14 no.1
    • /
    • pp.11-15
    • /
    • 1982
  • The growth rate and heat resistance of two types of Bacillus cereus isolated from cooked rice were observed. The FB-1 strain showed positive to haemolysis and negative to starch hydrolysis, but FB-2 strain positive to both reaction. The cell number of B. cereus FB-1 reached to more than $10^7\;cells/ml$ within 6 to 12 hours at $25{\sim}35^{\circ}C$ when cultured on the medium of cooked rice homogenate (cooked rice 30g-phosphate buffer solution 80 ml), but the numbers at its maximum growth were only $10^4{\sim}10^6\;cells/ml$ at $45{\sim}55^{\circ}C$. The specific growth rate of FB-1 strain were $0.82hr^{-1}\;at\;20^{\circ}C$, $1.76hr^{-1}\;at\;30^{\circ}C$, $2.21hr^{-1}\;at\;35^{\circ}C$ and $1.84hr^{-1}\;at\;40^{\circ}C$, respectively. D-values of FB-1 and FB-2 spores at $70{\sim}100^{\circ}C$ were in the range from 18 to 3.1 min and 23.5 to 3.7 min, respectively.

  • PDF

Characteristics of Photosynthesis and Respiration in Fraxinus rhynchophylla Hance and Fraxinus mandshurica Rupr. Leaves (물푸레나무와 들메나무엽(葉)의 광합성(光合成)과 호흡(呼吸)의 특성(特性))

  • Han, Sang Sup;Sim, Joo Suk
    • Journal of Korean Society of Forest Science
    • /
    • v.78 no.3
    • /
    • pp.280-286
    • /
    • 1989
  • The present study was to examine the effects of light, temperature, and water stress on the photosynthesis and respiration rates and its seasonal changes in 3-Year-old Fraxinus rhynchophylla and Fraxinus mandshurica seedlings raised in pot in nursery. The results obtained are as follows: 1. The estimated light compensation points at which net photosynthesis approached zero were 35 and $28{\mu}Em^{-2}\;s^{-1}$ for F. rhyrachophylla and F. mandsdzurica leaves, respectively, The light saturation points occurred at $700{\mu}Em^{-2}\;s^{-1}$ in these species. 2. The maximum rates of net photosynthesis of leaves occurred at about $25^{\circ}C$ in F. rhynchophylla and at $20^{\circ}C$ in F. mandshurica. 3. The decrease in net photosynthetic rates of leaves began at -13 bars in F. rhynchophylla and -10 bars in F. mandshurica, and then its rates approached approximately zero at -23 bars in F. mandshurica and -29 bars in F. rhynchophylla. 4. The dark respiration rates of leaves were similar from $10^{\circ}C$ to $40^{\circ}C$ between these species, Also these increased from -10 bars to -28 bars, and then decreased remarkably in these species. 5. The net photosynthetic rates of leaves of F. mandshurica were higher than those of F. rhynchoplaylla until June, and after that lower than F. rhynchophylla. The dark respiration rates of leaves of F. rhynchophylla were higher than those of F. mandshurica from June to August, and After that similar between these species. 6. The respiration rates of stem and root were highest in April during the growing season. These values of F. rhynchophylla were slightly higher than those of F. mandshurica throughout the growing season.

  • PDF

Numerical Investigation on Two-Dimensional Inviscid Edge Receeding of a Stationary Fluid Sheet (정지된 2차원 액체 필름 끝단의 비점성 수축특성에 관한 수치연구)

  • Ahn, Ja-Il;Song, Mu-Seok
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.10 no.2
    • /
    • pp.107-111
    • /
    • 2007
  • A two-dimensional numerical method for inviscid two-fluid flows with evolution of density interface is developed, and an initially stationary two-dimensional fluid sheet surrounded by another fluid is studied. The interface between two fluids is modeled as a vortex sheet, and the flow field with the evolution of interface is solved by using vortex-in-cell/front-tracking method. The edge of the sheet is pulled back into the sheet due to surface tension and a blob is formed at the edge. This blob and fluid sheet are connected by a thin neck. In the inviscid limit, such process of the blob and neck formation is examined in detail and their kinematic characteristics are summarized with dimensionless parameters. The edge recedes at and the capillary wave propagating into the fluid sheet must be considered for better understanding of the edge receding.

  • PDF

Fed-Batch Culture of Brevibacterium CHI for the Production of Nitrile Hydratase (Brevibacterium CH1의 유가 배양에 의한 Nitrile Hydratase의 생산)

  • 황준식;황영보;이처영;장호남
    • Microbiology and Biotechnology Letters
    • /
    • v.20 no.5
    • /
    • pp.614-618
    • /
    • 1992
  • The batch and fed-batch cultivations of Brevibacteriurn CHI were carried out for the production of nitrile hydratase. In batch culture, with pH control the cell mass and the specific activity increased more 20% and 30%. respectively. The maximum growth rate was obtained at a glucose concentration of $20g/{\ell}$ because of substrate inhibition. The fed-batch culture of Brevibacteriurn CHI with constant substrate feeding gave a cell density of up to $68g/{\ell}$ and nitrile hydratase activity was maintained at above 6.1units/mg. The cell growth yield on carbon .source was ca. 0,68 g/g glucose consumed. The total nitrile hydratase activity in this fed-batch mode increased up to 414.8 units/m${\ell}$, which amounted to 4.4 times that of the batch culture.

  • PDF

LED IT-based System sensor network transceiver module research (LED IT 기반 시스템 센서 네트워크 송수신 모듈 연구)

  • Jang, Tae-Su;Lee, Jun-Myung;Choi, Jung-Won;Kim, Yong-kab
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2012.10a
    • /
    • pp.11-12
    • /
    • 2012
  • In this paper, efficient visible light communication technology LED (Light Emitting Diode) lighting through the existing infrared sensor used for performance analysis of transmitting and receiving is possible. LED utilizes lighting by changing light into electricity. Lighting features while maintaining the basic principles of flashing LED and PD (Photo Diode) to send and receive communications from LED lighting communication convergence principle be realized simultaneously enabling. Multiple IT applications under the basic structure of LED technology development, and the current was encountered in real life. LED lighting anywhere with wireless communication technology that can, in order to ~ 1m above the initial value by taking advantage of the system H/W and infrared sensors(PD) are widely used in the entire system that can improve the speed of visible light data transmission system is finished. LED module that is used to communicate whether the performance analysis, For forecasting and communication distance on the LED and infrared sensor configuration of the implementation of the research is to study about the possibility of application methods and indicates.

  • PDF

Resolution Limits of Cross-Well Seismic Imaging Using Full Waveform Inversion (전파형 역산을 이용한 시추공 영상의 분해능)

  • Cho, Chang-Soo;Lee, Hee-Il;Suh, Jung-Hee
    • Geophysics and Geophysical Exploration
    • /
    • v.5 no.1
    • /
    • pp.33-45
    • /
    • 2002
  • It was necessary to devise new techniques to overcome and enhance the resolution limits of traveltime tomography. Waveform inversion has been one of the methods for giving very high resolution result. High resolution image could be acquired because waveform inversion used not only phase but amplitude. But waveform inversion was much time consuming Job because forward and backward modeling was needed at each iteration step. Velocity-stress method was used for effective modeling. Resolution limits of imaging methods such as travel time inversion, acoustic and elastic waveform inversion were investigated with numerical models. it was investigated that Resolution limit of waveform inversion was similar tn resolution limit of migration derived by Schuster. Horizontal resolution limit could be improved with increased coverage by adding VSP data in cross hole that had insufficient coverage. Also, waveform inversion was applied to realistic models to evaluate applicability and using initial guess of travel time tomograms to reduce non-linearity of waveform inversion showed that the better reconstructed image could be acquired.