• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.68-77
• /
• 2020

The purpose of the paper is to evaluate the pore structure and mechanical properties of early frost damaged concrete using electric arc furnace slag as aggregate. From the results, when the concrete is exposed to frost damage at an early age, the peak point of pores 100 to 150 ㎛ in diameter were transferred into larger one. When the freezing duration is not exceeded 24 hours, it is possible that the pore distribution of under the 200 ㎛ is maintained and pore size of over 500 ㎛ is not formed, and, the freezing resistance of concrete using EFG could be improved. When BFS was mixed in concrete using EFG as coarse aggregate, the relative strength is higher than that of natural coarse aggregate. Meanwhile, the elastic modulus and resonance frequency did not change significantly due to the early frost damage as compared with the compressive strength. So, it is necessary to analyze the correlation between the experimental results in order to evaluate the performance degradation due to early frost damage.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.44-50
• /
• 2014

Chaos communication system is one of the security algorithms that is applied to improve the security. Chaos signal is non-linear, and it is generated randomly according to the initial conditions. Also, chaos communication system has characteristics such as non-periodic, wide-band, non-predictability of signals and easy implementation. So, security of chaos communication system is superior, and it has low interception probability and good anti-jamming characteristic. However, BER performance is worse than digital communication system, because it has many self interference signal in case of CDSK system. To improve these disadvantages, we analyze the PDF trend which can improve the BER performance in existing study, and we proposed a chaos map. And, proposed chaos map was defined as the 'Boss map'. Generally, BER performance is changed according to initial values, parameters and spreading factors. Therefore, in this paper, we will introduce PDF trends which can improve the BER performance, and will describe about Boss map. Also, characteristics of Boss map is analyzed by evaluating the BER performance of Boss map according to initial values, parameters and spreading factors. As a result, while maintaining the similar BER performance, initial value of Boss map can be selected from 0 to 1.2, and BER performance is best when parameter alpha is 2.5. Also, BER performance is best when spreading factor is 50.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.210-211
• /
• 2011

이 논문은 역기전력을 기반으로 한 센서리스 제어 시에 향상 된 초기기동 성능을 위한 간단한 초기 회전자 위치추정 방법을 제시하였다. 제시된 추정방법은 전동기가 정지상태에서 전류와 인덕턴스의 반비례관계를 이용하여 회전자의 돌극성에 의한 고정자 각 권선의 인덕턴스의 변화로 생기게 되는 전류의 대소관계를 비교하여 초기 회전자 위치를 추정한다. 이 초기 회전자 위치추정 방법은 역기전력을 기반으로 한 센서리스 제어와 함께 구현되기가 쉽고 성공적인 초기기동으로 역회전이나 기동에 실패하지 않게 하며, 기존의 다른 인덕턴스에 의한 전류포화를 이용한 방법에 비해 빠르고 쉽다는 것이 장점이다. 또 다른 장점으로 이 방법은 외부적인 장치가 필요가 없고 모터의 변수들에 영향을 받지 않는다. 실험으로서 제시한 초기 회전자 위치추정의 방법을 증명하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.493-502
• /
• 2009

In this paper, we compare the performance of initial timing acquisition in direct sequence ultra-wideband(DS-UWB) systems with different transmit pulse shaping filters through extensive computer simulations. Simulation results show that the timing acquisition performance of the DS-UWB system, whose chip rate is 1.32 Gchip/s, employing a rectangular transmit filter is similar to that employing a square root raised cosine(SRRC) filter with an interpolation factor of 4 in the realistic UWB channels(CM1 and CM3) as well as the additive white Gaussian noise(AWGN) channel. Additionally, we present both a 24-parallel digital correlator structure and a 24-parallel processing searcher operating at a 55 MHz system clock, and then briefly discuss the initial timing acquisition procedure. Because we can adopt an 1.32 Gsample/s digital-to-analog(D/A) converter and an 1.32 Gsample/s analog-to-digital(AID) converter in the DS-UWB system by employing the rectangular transmit filter, we have a realistic solution for the DS-UWB chipset development.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.313-318
• /
• 2017

For the separation of olefins/paraffins, $Poly(ethylene oxide)(PEO)/AgBF_4/Al(NO_3)_3/Ag_2O$ composite membranes were prepared. When $Ag_2O$ was introduced, the initial selectivity and permeance of composite membranes were observed to be 13.7 and 21.7 GPU, respectively. The increase in performance compared to the initial performance of $PEO/AgBF_4/Al(NO_3)_3$ membrane (selectivity 13 and permeance 7.5 GPU) was thought to be due to the increase of Ag ion activity due to the addition of $Ag_2O$. However, performance degradation over time was observed, which was thought to be due to the polymer matrix PEO. Since the PEO polymer could not stabilize the $Ag_2O$ particles, the $Ag_2O$ particles becmae aggregated together as the solvent evaporates, and $Ag_2O$ acts as a barrier. As a result, the permeance decreases over time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.52-58
• /
• 2017

Concrete made with ground granulated blast-furnace slag(GGBS) has many advantage, including improved durability, workability and economic benefits. GGBS concrete is that its strength development is considerably slower under standard $20^{\circ}C$ curing conditions than that of portland cement concrete, although the ultimate strength is higher for same water-binder ratio. GGBS is not therefore used in application where high early age strength is required. In this study, to overcome the limitation of the initial strength decrease due to the use of slag, the slag substitution rate was changed to 30% under the low temperature curing temperature condition and the slag used concrete composition with the same or higher strength performance as OPC(Ordinary Portland Cement).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.15-20
• /
• 2016

The existing multiple modulus-based self-recovering equalization type has not been applied to initial equalization. Instead, it was used for steady-state performance improvement. In this paper, for the self-recovering equalization type that considers the multiple modulus as a desired response, the initial convergence performance was improved by extending the dynamics of the errors using error boosting and their characteristics were analyzed. Error boosting in the proposed method was carried out in proportion to a symbol decision for the equalizer output. Furthermore, having the initial convergence capability by extending the dynamics of errors, it showed excellent performance in the initial convergence rate and steady-state error level. In particular, the proposed method can be applied to the entire process of equalization through a single algorithm; the existing methods of switching over or the selection of other operation modes, such as concurrent operating with other algorithms, are not necessary. The usefulness of the proposed method was verified by simulations performed under the channel conditions with multipath propagation and additional noise, and for performance analysis of self-recovering equalization for high-order signal constellations.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.540-548
• /
• 2012

The Weapon Target Allocation(WTA) problem is the NP-Complete problem. The WTA problem is that the threatful air targets are assigned by weapon of allies for killing the targets. A good solution of NP-complete problem is heuristic algorithms. Genetic algorithms are commonly used heuristic for global optimization, and it is good solution on the diverse problem domain. But there has been very little research done on the generation of their initial population. The initialization of population is one of the GA step, and it decide to initial value of individuals. In this paper, we propose to the population initialization method to improve a Genetic Algorithm. When it initializes population, the proposed algorithm reflects the characteristics of the WTA problem domain, and inherits the dominant gene. In addition, the search space widely spread in the problem space to find efficiently the good quality solution. In this paper, the proposed algorithm to verify performance examine that an analysis of various properties and the experimental results by analyzing the performance compare to other algorithms. The proposed algorithm compared to the other initialization methods and a general genetic algorithm. As a result, the proposed algorithm showed better performance in WTA problem than the other algorithms. In particular, the proposed algorithm is a good way to apply to the variety of situation WTA problem domain, because the proposed algorithm can be applied flexibly to WTA problem by the adjustment of RMI.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.219-224
• /
• 2012

We study for long-term performance of amorphous silicon solar cells under light exposure. The performance is predicted with a kinetic model in which the carrier lifetimes are determined by the defect density. In particular, the kinetic model is described by the stretched-exponential relaxation of defects to reach equilibrium. In this report, we simulate the light-induced degradation of the amorphous silicon solar cells with the kinetic model and AMPS-1D computer program. And data measured for outdoor performances of various solar cells are compared with the simulated results. This study focuses on examining the light-induced degradation for the following amorphous silicon pin solar cells: thickness${\approx}$300 nm, built-in potential${\approx}$1.05 V, defect density (at t=0)${\approx}5{\times}10^{15}cm^{-3}$, short-circuit current density (at t=0)${\approx}15.8mA/cm^2$, fill factor (at t=0)${\approx}0.691$, open-circuit voltage (at t=0)${\approx}0.865V$, conversion efficiency (at t=0)${\approx}9.50%$.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.19-26
• /
• 1995

The assessment of maneuverability of a ship is very important from the view point of safety of human beings and of pollution of ocean. And, it is quite natural that every ship yard wants to have some tools with which they can build a ship with good maneuverability. But, maneuvarability of a ship is very subtle problem, and to calculate the exact maneuvering motion, lots of captive model tests must be carried out. Futhermore, in the initial design stage we can not make the scale model, because the lines of a ship is not fixed. In this paper, some approximate method to calculate the maneuvering motion of a ship, with the principal dimensions of hull, and propeller, rudder characteristics only, is studied. And, proposed approximate method is used to calculate the turning and zig-zag maneuver of several ships. The results of those calculations and the usability of the method are discussed.