• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.7-12
• /
• 1998

쾌적한 의생활을 영위하기 위해, 인간의 제반 특성에 적합한 의복 설계에 관한 연구가 활발히 전개되고 있다. 기존 연구에서는 주로 인체 인자에 근거하여 의복 원형 연구가 이루어졌으나 인간 특성에 적합한 의복의 설계를 위해 인체 인자와 함께 의복 인자를 병행한 연구의 필요성이 대두되고 있다. 특히 의복 소재의 경우, 성유과학의 발달로 다양한 의복 소재가 개발되고 있음에도 불구하고 대부분의 의복 원형 연구에서는 광목으로 제한되어 연구가 행해지고 있는데, 광목이 원형 연구시 동작에 따른 체표 변화에 대응하기 위한 여유분으로 정확히 산출할 수 있다는 특징이 있기는 하지만 이로 인하여 의복 원형의 여유 분 설정에 소재의 특성에 따른 차이에 관해서는 아직 까지 많은 연구가 진행되지 못하였다. 이에 본 연구 에서는 최근 마른 체형의 선호와 함께 유행하고 있는 신축성 소재를 이용한 슬랙스 원형에 대하여 연구 하였다. 본 연구는 소재의 신장특성과 의복 설계와의 관계에 대한 기초 자료로써 활용될 수 있을 것이며, 또한 슬랙스 원형에 대한 연구를 보다 다양한 소재로 넓힘으로써 원형의 활용도를 높힐 수 있을 것으로 기대한다.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.434-442
• /
• 2006

The purpose of this study was to develop the beautiful basic bodice pattern that satisfied both functionality and aesthetics on the basis of the change in the figure and length of surface body for each movement through a three-dimensional development figure of surface body for young women (aged between 18 and 24) who were very sensitive to fitness of clothes. Existing three basic bodice patterns (Yim wonja-, ESMOD-, and FIT-types) were selected and then compared and analyzed in terms of drawing methods and the wearing test was carried out by a sensory test in order to design an experimental prototype. The design of study prototype was improved by three wearing test that was correlated with low satisfactory item. And the ease was established by difference of previous direct measurement and body surface measurement.

• The Research Journal of the Costume Culture
• /
• v.28 no.1
• /
• pp.1-14
• /
• 2020

This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4-1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)-0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)-1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)-1.2 cm and 3.5 cm. Front chest circumference was C/4-1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4-0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)-0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1801-1808
• /
• 2001

본 연구는 노년여성을 위한 의복 원형을 설계하기 위하여 60∼80세 의 노년여성을 대상으로 직접 계측을 실시하여 체형을 유형화하고 동작에 따른 체표면 특성을 분석하였다. 인자분석을 실시한 결과 상반신 비만요인, 높이요인, 상반신 앞면길이, 어깨 형태, 상반신 뒷면 길이, 어깨 경사도, 목형태, 진동깊이의 8개 인자가 추출되었다. 군집분석에 의한 체형분류 결과, 유형 1은 상반신의 골격이 가장 작고 왜소하며 가슴의 하수가 작은편의 앞으로 굴신된 체형이며, 유형 2는 키가 작고 보통인 체형으로 상반신의 앞뒤면 길이가 짧으며 가슴의 하수가 크고 어깨가 넓고 약간 앞으로 숙여진 체형이다. 유형 3은 키가 가장 크고 등과 어깨가 두꺼운 골격이 큰 체형이다. 유형 4는 키가 약간 크고 마른 체형에 상반신 앞면길이 인자가 큰 유형으로 약간 뒤로 젖혀진 체형이라 할 수 있다. 동작에 따른 체표면의 변화를 델마토그래프법 (Dermatograph method)에 의해 측정 한 결과, 가로 방향에서 동작에 따라 유의한 차이를 나타낸 기준선은 뒤목점-어깨끝점길이, 어깨 길이 및 앞가슴둘레선, 후액와선이며, 세로 방향에서는 어깨끝점-BP-허리중심점, 어깨중심에서 앞허리선까지의 앞길이 및 옆선길이로 나타났다.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.111-122
• /
• 1985

The present study was performed to observe the ultrastructure of the integument of adult Paragonimus westermani. Dogs experimentally infected with 60 metacercariae of F. westermani were autopsied 4 months after the infection. Adult p. westermani were extracted from the dogs and the fine structure was studied by means of scanning and transmission electron microscope. The findings are as follows: 1. Scanning electron microscopic findings showed that the spines and the papillae are distributed at whole body surface but the well developed spines or papaillae are shown around the oral sucker and ventral sucker. 2. At the end of the body, excretory pore was found, the shape was irregular. 3. Transmission electron microscopic findings showed that plasma membrane, tegument, basal lamina, connective tissue, circular muscle layer, longitudinal muscle layer. nerve axon and tegumental cell were observed. 4. In higher magnification, plasma membrance and bar-shaped granules were found at the outer surface of the tegument.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.105-112
• /
• 1997

This study was carried out to examine the calculations including the ease amount for bodice pattern. The conclusions were as follows. The areas that were required the ease amount were the horizontal reference line, armhole depth, back & front width. According to this result the calculations including the ease amount were obtained as follows: B/2+4.1cm for horizontal reference line, B/6+6.8 cm for armhole depth, B/6+3.9 cm for the half of back width, B/6+2.3 cm for the half of front width, B/4+4.3 cm for bust point length.

• The Research Journal of the Costume Culture
• /
• v.29 no.6
• /
• pp.904-921
• /
• 2021

The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.4
• /
• pp.149-166
• /
• 2021

This study tried to suggest a drafting method to draft tight fit torso patterns suitable for adult males with a sway back somatotype and a bend forward somatotype by setting and distributing the ease through the completion of the somatic surface pattern using the 3D body surface segment method. It was intended to be presented as a drafting method. As for the research method, the suitability of the somatic surface patterns and the tight fit torso patterns were confirmed by the evaluation of virtual wear, and the patterns were modified and supplemented. The research results are as follows. In the first evaluation of the tight fit torso patterns, the average, for 55 evaluation items, was 3.92 points for the sway back somatotype and 3.89 points for the bend forward somatotype. In the second evaluation, the bend forward somatotype was 4.51 points and the sway back somatotype was 4.62 points. The chest circumference ease amount for the bend forward somatotype and the sway back somatotype are 6.5% (6.8 cm) and 7% (6.8 cm) of the chest circumference, respectively, and the distribution of the front and back ease is the same at 4:6 (2.72 cm:4.08 cm). The waist circumference ease amount is 6.5% (5.8cm) and 6.5% (5.6 cm) of the waist circumference dimensions, and the distribution of the front and backease are 5:5 (1.45 cm: 1.45 cm) and 4:6 (2.24 cm: 3.36 cm), respectively. The completed tight fit torso patterns were converted into institutional formulas and presented as a drafting method.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).