• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.39-44
• /
• 2003

As the portable electronic equipments are developed and popularized, the batteies are more important. To prolong life of the equipments, engineers demand to have batteries of high-power density and they are used to use Li-ion batteries popularly Li-ion batteries are better than conventional batteries, Ni-cd, about power density per volume and weight, but they have a fault that discharge voltage of them goes down. In order to maximize life of the Li-ion batterries, we have to use a converter which is suitable for the characteristic of Li-ion batteries. Therefore, capacitive idling SEPIC(Single Ended Primary Inductance Converter) that is derived from the SEPIC topology is proposed as a source of the Portable low-power applications. The converter has characteristics of buck-boost porformance. Besides, that makes it possible to increase the switching frequency by partial soft commutation of power switches through adding a diode and a switch. This paper is presented the characteristics, DC voltage conversion ratio, circuits of operation modes, of the converter and it is analized and implemented.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.574-578
• /
• 2014

A holographic data storage (HDS) has some advantages of high storage capacity, fast transmission, and short access time. However, there are two major concerns with the system which are two-dimensional (2D) inter-symbol interference (ISI) and inter-page interference (IPI). Thus, this paper proposes a 4-level 6/9 modulation code which mitigate inter-symbol interference (ISI).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.10-14
• /
• 2015

In holographic data storage systems, data is recorded and read by page on a volume of storage medium, and it can increase transmission rate and storage capacity because of two-dimensional page-oriented data processing by charge-coupled devices. However, HDS suffers two-dimensional intersymbol interference unlike conventional data storages. In this paper, we propose a preprocessing method of decreasing ISI before read data in HDS pass to detector. This method has some advantage when we collaborate with the preprocessing for reducing misalignment error and modulation code.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.129-137
• /
• 2013

From the cooked-rice as a raw material, activated carbons throughout a hydrothermal synthesis and vacuum soak of KOH for chemical activation were obtained. Activated carbon electrodes for electric double layer supercapacitors were prepared and electrochemical characteristics were examined. Including the specific surface area by BET method and pore size distribution by NLDFT method, physical properties of activated carbons were investigated by means of SEM, EDS, XRD, and TG analyses. Cycle voltammetry and AC-impedance measurements were conducted to confirm the electrochemical characteristics for the electrodes. From hydrothermal synthesis, $5{\sim}7{\mu}m$ diameters of spherical carbons were obtained. After the activation at $800^{\circ}C$, it was notable for the activated carbon to be the specific surface $1631.8cm^2/g$, pore size distribution in 0.9~2.1 nm, and micro-pore volume $0.6154cm^3/g$. As electrochemical characteristics of the activated carbon electrode in 6M KOH electrolyte, it was confirmed that the specific capacitances of 236, 194, and 137 F/g at the scan rate of 5, 100, and 500 mV/s respectively were exhibited and 91.2% of initial capacitance after 100,000 cycles at 200 mV/s was maintained.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.831-835
• /
• 2007

금강은 우리나라 중부 내륙에서 서해로 흐르는 유로연장 401km, 유역면적이 전 국토면적의 약 10%에 해당하는 $9,886km^2$에 이르는 남한의 5대강 중 하나이다. 1981년, 이 강의 하구로부터 150km 상류지점인 대전시 동북쪽 16km, 청주시 남쪽 16km의 대전시와 충청북도가 만나는 지점에 대청다목적댐이 준공되었다. 대청다목적댐은 높이 72m, 길이 495m, 체적 123만$4,000m^3$의 콘크리트 중력식 댐과 석괴식 댐으로 구성된 복합형 댐으로서, 이 댐의 주요시설로는 저수용량 14억9,000만$m^3$의 본 댐과 조정지 댐이 있다. 그 후 1992년에는 대청 조정지 댐 하류 200m 지점에 현도 지방 산업단지 취수장(시설용량: $17,600m^3$/일)이 건설되었으며, 통상 하루 약 7,500톤의 물을 인근의 공단에 공급해오고 있다. 하지만 최근, 취수량이 급격히 감소됨에 따라, 인근 공단으로의 물 공급에 많은 어려움이 발생하고 있다. 이에 대한 대처 방안으로서 한국수자원공사는 취수장 관리자의 요구에 따라 조정지 댐 방류 수문 위치조정 및 방류량 조절 등의 조치를 취하고 있지만, 그 효과는 정량적으로 검토되어지지 않았다. 그러므로 본 연구에서는 위에서 명기한 조치의 실효성을 파악 하고자, 수문의 위치변화에 따른 취수구 부근의 수리특성을 조사하였다. 구체적인 조사항목은 다음과 같다. 첫째, 하천용 유량측정장비 (StreamPro ADCP (Teledyne RD Instruments))를 이용한 방류구와 취수구 사이의 유량 조사 둘째, 다 항목 수질 및 3차원 유속 측정장비 (ADV6600 (Sontek / YSI, Inc.))를 이용한 취수구 앞에서의 유속, 유향 및 수위변동 조사 셋째, 수위계 (Orphimedes (OTT MESSTECHNIK GmbH & Co. KG)) 및 파고계 (Compact-WH (Alec Electronics Co., Ltd.))를 이용한 하천을 횡단하는 취수구 좌 우 지점에서의 수위변동 모니터링 그 결과 방류수문의 위치변화에 따른 취수구 인근의 수리학적 특성은 조정지 댐의 방류수문으로부터 약 100 - 150 m 하류의 횡단면에서는 유속분포의 차이가 발견 되었으나 하류로 흐름이 진행됨에 따라 그 차이는 감쇄되고 약 200m 떨어진 취수구 앞의 횡단면에서는 유속분포가 거의 동일함을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.411-417
• /
• 2013

To use as an anode material of lithium secondary battery, graphite-silicon composite powders are prepared by ball-milling with silicon nanoparticles (average diameter 100 nm, 0~50 wt%) and graphite powder (average diameter $15{\mu}m$) and their electrochemical properties are examined. As the silicon content increases, the graphite becomes smaller by the ball-milling and amorphous phase appears whereas the silicon do not suffer the change of nanocrystalline phases and embeds within the amorphous phase of graphite. Cyclic voltammetry at low scan rate reveals that typical oxidation peaks of graphite and silicon appear at 0.2~0.35 and 0.55~0.6 V, respectively, with higher reversibility for repeated cycles. In contrast, the high-scan-rate redox behavior is very irreversible for repeated cycles. High irreversible capacity is exhibited in the initial charging-discharging cycles, but it diminishes as the cycle number increases. The saturated discharge capacity achieves about 485 mAh $g^{-1}$ at 50th cycle for the composite of Si 20 wt%. This is due to the formation of amorphous graphite morphology by the adequate composition (C:Si=8:2 w/w), which efficiently buffers the volume change during alloying/dealloying between silicon and lithium.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.26-29
• /
• 2011

A promising alternative technology is the potential use of ice slurries as a secondary refrigerant in conventional cooling process. Ice slurries behave almost like a liquid and can be pumped through pipes although the energy capacity of ice slurries per unit volume is considerably higher than that for chilled water or brine due to the latent heat capacity of the ice particles. To give the basic data for the design of cooling systems using ice slurries, experimental study has been conducted to find out the performance of the cooling coil of show-case with ice slurries. Despite the fact that ice slurries entering the cooling coil had at least $5^{\circ}C$ higher temperature than that of R22, it was still capable of providing a similar cooling performance than that obtained with R22.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.772-777
• /
• 2003

선박이 배출하는 안정수(ballast water)는 외부로부터 유해 생물들이 유입되어 전파해 오는 주요경로로써 해양환경의 매우 중요하고 위험한 일종의 하나이지만, 이에 대한 효과적인 처리방법은 아직까지도 개발되지 못하였다. 그러나 최근 강 전리방전을 이용하여 고 밀집 산소와 물분자를 고농도 수산자유기(OH: hydroxyl radical)로 전리, 활성입자를 발생시켜 신속히 확산시키면 넓은 범위에서 비교적 낮은 농도로 유해성 침입 생물을 잔류물 없이 저렴한 비용으로 살균제나 촉매제의 사용 없이 소멸시켜 처리하는 효과적인 새로운 녹색방법을 제안하였다. 또한, 수산기는 강 산화제로써(산화환원 전위는 2.80 eV), 적조생물을 신속, 효과적으로 사멸시켜 잔유물과 오염물 발생 없이 이상적으로 해양적조현상을 처리할 수 있는 활성물질이다. 고출력 강 전리장치를 활용하면 수산기 활성제의 발생 농도를 Sr104 이상으로 얻을 수 있으므로, 해양적조처리에 요구되는 문턱 값 농도(~l$\times$$10^{-6}$)를 충족시킬 수 있으며, 이 경우 적조생물 소멸처리시간은 불과 10 sec 내외이므로 선박 안정수 처리문제와 함께 적조발생의 난문제를 해양동력학적으로 동시에 해결할 수 있는 효과적인 기술이다. 실험결과로부터 시간당 1 k톤의 활성물질을 발생하는 수산기활성제 제조장치의 경우, 약 4$\times$$10^2$ $\textrm{km}^2$/h의 적조해면을 처리할 수 있으며, 그 비용은 약 US$l,000 정도에 상당하므로, 적조에 따른 경제손실과는 비교될 수 없는 저렴하고 효과적인 방법이다. 활성물질의 생성시간과 가공시간은 불과 수십 $\mu\textrm{s}$ 및 수 sec 에 불과하므로, 1 kton/h 용량의 수산기활성제 제조장치의 환산소비동력은 약 200 kW이고, 장치의 체적은 10~30 ㎥의 공간으로 충분하므로, 소형선박으로 상당면적의 적조피해를 효과적으로 해결할 수 있다.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.430-435
• /
• 2017

$Li_4Ti_5O_{12}$ (LTO) is an anode material for lithium ion battery, and the cycle performance is very good. The volume change of LTO during insertion and deinsertion of lithium ion is very small, so the cyclibility is very high. In this experiment graphene and CNT was added to increase the low conductivity of LTO which is the weak point of LTO. When graphene was located on the surface of LTO the conductivity did not increase so much because of the nano size LTO. Addition of CNT increased the conductivity because of the formation of the conducting network between LTO particle and the graphene. Carbon material addition was changed before and after the LTO manufacturing, and the capacity and the cyclibility was compared.