• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.475-481
• /
• 2019

The importance of performance-based design feedback is being emphasized when it comes to the potential impact that affects all the lifecycle of the building. However, the latency and disconnection of domain expert in the sector of AEC/FM remain current obstacles between design and performance feedback. It is hard to utilize performance feedback information for design exploration and support design decision making during the conceptual phase of design. Using parametric design, this paper proposes various design alternatives from a set of rules and constraints defined by algorithms for the geometric configurations of an Office Building. A Building Performance Analysis (BPA) was to developed using Autodesk® Revit® 2019 which integrates Autodesk® Green Building Studio® to predict its sufficient daylighting conditions of the LEED v4's Daylighting Autonomy (DA). The parametric-based performance feedback of this study outlines potential design improvements for further exploration in application to the early design process.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.9-16
• /
• 2011

This paper represents an interworking architecture for keeping the VLC audio quality between Worldwide Interoperability for Microwave Access (WiMAX) and IEEE 802.11 Mobile Ad hoc Network (MANET) where both mobile routers and mobile nodes are moving dynamically. Systematic performance analysis on the interworking architecture has been conducted by using OPNET simulator to show the results such as Packet Delivery Ratio (PDR) and throughput. Based on simulation results, when the number of MANET nodes is small, PDR remains relatively stable even though data packets increase. However, with the many MANET nodes, PDR decreases as data traffic increases. Throughput is affected by the number of MANET nodes. Especially when the MANET node density has increased further, throughput is much higher, but it is not affected by the mobility speed. However, FTP download and upload response time is not affected much by both the number of MANET nodes and the mobility speed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.421-424
• /
• 2005

Recently, As the managing techniques of consuming method and transmission for the sharply increasing multimedia contents has been developed regardless of compatibility by each company, It is a serious obstacle to the development of the organized copyright techniques because nothing can be shared by each other. The MPEG committee under ISO established MPEG-21 framework for it and proposed the REL as the words taking care of copyright and standardized them. However, there seemed to be some problems that special knowledge such as Schema defining the structures of XML and REL should be necessary. Furthermore, There can be some obscurity when the authority of REL document and one of consumer side is different. Therefore, in this paper, we laid out and realized the copyright including consuming system to copyright and prove the REL documents more conveniently and RDD integration system using Web Services technology which can get rid of the vagueness of REL.

• Journal of the Korea Society for Simulation
• /
• v.30 no.1
• /
• pp.139-152
• /
• 2021

Simulations enable virtually experiencing rare events as well as analytically analyzing such events. Defense modeling and simulation research and develops the virtual and the constructive simulations to support these utilizations. These virtual and constructive(VC) simulations can interoperate to simultaneously virtual combat experience as well as evaluations on tactics and intelligence of combat entities. Moreover, recently, for artificial intelligence researches, it is necessary to retrieve human behavior data to proceed the imitation learning and the inverse reinforcement learning. The presented work illustrates a case study of VC interoperations in the aircombat scenario, and the work analyze the collected human behavior data from the VC interoperations. Through this case study, we discuss how to build the VC simulation in the aircombat area and how to utilize the collected human behavior data.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.85-90
• /
• 2022

In this study, in order to test the performance of the aircraft system, a threat signal simulator that can transmit a signal similar to the actual threat to the aircraft under test with high power was designed. The high-power threat signal simulator should be able to transmit broadband (UHF band, L band, S band, X band) communication signals and radar signals, and control to transmit signals accurately directed to the aircraft through interfacing tracking radar. The signal strength of the developed equipment is 63 dBm to 93 dBm or more depending on type of signal, and the tracking precision is less than 0.1 degree, which satisfies the required performance. And it was confirmed that the antenna of the high-power threat signal simulator can accurately direct the signal to the aircraft position through the tracking radar interfacing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.181-190
• /
• 2007

The linkage framework of surface geometric modeling based on the NURBS and shell finite element analysis is developed in this study. In the geometrically exact shell finite element analysis, the accuracy of the analysis strongly depends upon the accurate computation of the surface geometric quantities. Therefore if we obtain the necessary geometric quantities from the NVRBS surface equation, it's possible to construct the effective linkage framework of surface modeling in the CAD systems and shell finite element analysis using geometrically exact shell finite element. Besides, the linkage framework can be applied to the analysis of general and complex surfaces as well as simple surfaces. In this study, the shell surfaces are generated by interpolating given set of data points based on the NURBS surfaces. These data points usually can be obtained from surface scanning. But the representations of the generated NURBS surface are not same to one another. The accuracy depends on the chosen parameterization methods used in NURBS. Therefore, it is needed to select the suitable parameterization method according to the geometry of the surfaces. To verify the performance and accuracy of our developed linkage framework, we solve several well-known benchmark problems and assess the performance of the developed method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.261-271
• /
• 2014

Construction industry becomes large and complicated as that occurred in the construction processes and operations, and the growing social demand for more systematic and efficient methods of integrated management increases. Current facility maintenance system has been regarded as large labor-intensive and fairly stagnant, and faced on several issues including inefficiency in cost and time to collect and utilize various field information. Thus, this paper presents a maintenance prototype utilizing NFC technology and smart devices to efficiently collect and manage the field information in the course of the construction processes. By choosing dam facilities as a case study, construction data for dam inspection and maintenance were classified according to dam maintenance guideline, and database structure was constructed to incorporate with the NFC tags and smart device interface. The system prototype presented in this paper would improve the quality of the dam facilities maintenance system and provide business convenience and usability by contributing increased efficiency of field information management and sharing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.2
• /
• pp.85-100
• /
• 2004

Study and analysis on the digital certification of the world today, and census on how digital signature is being used or considered for the government will be used to sum of what can be the difficulties and Problems in operating digital signature certifications for the government administrations at this research, and of course the answers to these problems will be provided too. This research suggests practical ideas on how to interoperate between Government PKI (GPKI: Administrational Digital Certification for the Government) and National PKI (NPKI: Digital Certification for General Public ＆Business), how to make use of Standard Security APIs, how to manage (e.g. issue, reissue, update, revoke) digital certificate, how to improve technical side of security and reliability, and how to improve political issues on public education for information security. Digital certification will become more popular and widely used in government administrations in the future. Therefore, census and research on demands md satisfactions of digital certification for public and government will be regularly performed. Of course, continuous maintenances and improvement in this field will be necessary to obtain firmer way of information security.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.6
• /
• pp.939-946
• /
• 2023

In the hyper-connected network, which network equipment is diverse and network structure is complex, the attack surface has also increased. In this environment, MTD(Moving Target Defense) technology is being researched as a method to fundamentally defend against cyber attacks by actively changing the attack surface. network-based MTD technologies are being widely studied. However, in order for network address mutation technology to be applied within the existing fixed IP-based system, research is needed to determine what impact it will have. In this paper, we studied the impact of applying network address mutation technology to the existing network protection system. As a result of the study, factors to be considered when firewall, NAC, IPS, and network address mutation technologies are operated together were derived, and elements that must be managed in network address mutation technology for interoperability with the network analysis system were suggested.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.857-864
• /
• 2020

The multi-functional VoIP phone supports the Ethernet protocol in the TIPS(: Tactical IP Switch), which is one of the sub-systems of the tactical information and communication system (TICN). It provides secured voice / video calls in conjunction with VoIP exchanges and supports differential services such as multi-party calls and command functions. In this paper, improving methods have been proposed to reduce power supply defects in the field of multi-functional VoIP phones. The power supply part was improved by applying TVS of the output voltage inlet of the dedicated adapter of the multi-functional VoIP phone, TVS of the PoE module input, adding blocking diodes, and adding DC / DC converters behind the poly-switch. Also, functional and environmental tests were performed to verify the validity of the proposed methods.