• Title/Summary/Keyword: 첨두치

Search Result 43, Processing Time 0.035 seconds

A Study on the Peak Sidelobe of the Random Array Antenna (II) On the Estimator of Planar Array Antenna (임의 배열 안테나의 복로브 첨두치에 관한 연구 (II) 평면형 배열의 에스티메이터에 관하여)

  • Kim, Yeong-Su;Sin, Cheol-Jae;Park, Han-Gyu
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.20 no.6
    • /
    • pp.18-22
    • /
    • 1983
  • In this paper, we derive and analyze the peak sidelobe estimator of the planar random array antenna by extending the theory of the linear random array antenna. The computer simula-tions, which are based on Monte Carlo method, are programmed and applied easily to cases where a great number of array elements are involved. The results obtained from the computer simulations show that there is a little difference of the maximum 0.8 dB. Consequently, the peak sidelobe estimator is well consistent with the results of the computer simulations over confidence level 0.5.

  • PDF

Advanced Rake Receiver for Multiple Access M-ary Modulation UWB System in the IEEE Multipath Channel (IEEE 다중경로 채널에서 다중접속 M진 변조 초광대역 시스템을 위한 개선된 Rake 수신기)

  • An, Jinyoung
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.12
    • /
    • pp.12-19
    • /
    • 2014
  • In this paper, an advanced UWB (ultra wideband) Rake receiving technique based on the statistical distribution model is studied in the M-ary TH-PPM system with multiple access interference (MAI). In order to improve the performance of the Rake receiver, the stochastic model, which can flexibly express the behavior of MAI-plus-noise, is required and the Laplace distribution and the generalized normal Laplace (GNL) model applied by the curtosis matching method are considered. The performance of Rake receiver based on each probability distribution is evaluated in the IEEE multipath fading channel and compared to that of the conventional Rake receiver. The suggested approach shows a superior BER performance than that of conventional Rake receiver.

High-Efficiency and High-Power-Density 3-Level LLC Resonant Converter (고효율 및 고전력밀도 3-레벨 LLC 공진형 컨버터)

  • Gu, Hyun-Su;Kim, Hyo-Hoon;Ji, Sang-Keun;Ryu, Dong-kyun;Choi, Heung Gyoon;Han, Sang-Kyoo
    • Proceedings of the KIPE Conference
    • /
    • 2017.07a
    • /
    • pp.182-183
    • /
    • 2017
  • 본 논문은 고효율 및 고전력밀도 3-레벨 LLC 공진형 컨버터를 제안한다. 전원회로의 고전력밀도화를 위해서는 고주파 구동이 필수적이지만 기존 LLC 컨버터는 스위칭 손실로 인하여 한계를 갖는다. 스위칭 손실은 스위치 전압 첨두치 감소를 통해 저감이 가능하다. 전압 첨두치는 4개 스위치의 직렬연결을 통해 저감시킬 수 있으며, 각 스위치의 전압평형을 위한 추가적인 회로가 필수적이다. 따라서 본 논문에서는 스위칭 손실을 저감시킴으로써 1MHz 고주파 구동이 가능하며, 단 하나의 캐패시터를 이용하여 모든 스위치의 전압평형을 이룰 수 있는 3-레벨 LLC 공진형 컨버터를 제안한다. 또한 제안회로의 전압평형 원리를 이용하여 n-레벨 컨버터로 확장 가능하여 스위치 전압 첨두치를 더욱 저감시켜 입력전압이 높은 응용례의 적용에도 적합하다. 제안회로의 타당성 검증을 위해 350W급 시작품을 제작하여 실험 결과를 제시한다.

  • PDF

An Comparative Study on Effect of Inundation Reduction in Urban Area according to Operation Method of the Side Weir(Fixed Weir-Movable Weir) (횡월류위어 가동방식(고정보-가동보)에 따른 도시지역 침수피해 저감 효과 비교 분석)

  • Sung, Bok Kyeong;Yoon, Tae Hyung;Hwang, Sung Hwan;Moon, Young Il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.510-510
    • /
    • 2015
  • 우리나라는 1960년대 경제개발에 의한 산업화 이후, 토지이용이 꾸준히 확대되어 왔으며, 이로 인해 불투수면적 증가하였고, 배수시설의 확장은 표면조도계수 및 침투율을 급격히 감소시키는 요인으로 작용하여 우수 및 오수의 유출속도가 증가하여 홍수방어능력이 감소하였다. 또한 기후변화로 인한 국지성 집중호우의 발생빈도가 증가함에 따라 이로 인한 피해가 더욱 가중되고 있다. 현재 이에 대한 대응능력을 갖추기 위한 치수대책을 꾸준히 실시하고 있으나 주로 홍수량을 줄이기 보다는 증가하는 홍수량을 처리하기 위한 하천정비, 하수관, 유수지 및 펌프장 증설을 중심으로 이루어지고 있다. 이는 하천 하류의 홍수량을 증가시켜 하천주변에 침수피해를 일으키고 있어 보다 항구적인 대책이 요구되고 있다. 본 연구에서는 특정유역에 침수가 발생할 시 횡월류위어 가동방식(고정보-가동보)에 따라 미치는 침수영향에 대해 저류조 유입특성(총 유입량, 유입유량 첨두치), 침수지역 침수특성(첨두유량, 첨두수위, 첨두유속, 침수면적, 월류시간)을 정량적으로 분석하여 향후 저류지 설치에 따른 횡월류위어 가동방식 선정에 기여하고자 한다.

  • PDF

Method of Measurement of Electromagnetic Emission from Trains (철도 차량의 전자파 방사 측정 방법)

  • Chae, Eun-Kyung;Ryu, Joon-Hyoung;Baik, Kwang-Sun;Yoon, Yong-Ki
    • Proceedings of the KSR Conference
    • /
    • 2011.10a
    • /
    • pp.2037-2042
    • /
    • 2011
  • The railway electromagnetic environment is much more severe than most commercial and domestic environments. There are concerns about electromagnetic emissions from railways and their potential to interfere with the operation of commercial radio service and other equipment. EMC standards for railway applications are referenced as EN 50121 series and these standards describe the measurement method and specify limits for emission. However standard provide precise description of the general aspect of the measurement procedure and requirement of test equipments, making a reliable measurement of the radiated emissions from a train is a problem of balance between available observation time and the measurement time required by the characteristics of the measurement system. This paper focuses on the problem of measurement.

  • PDF

Assessment of AnnAGNPS Model in Prediction of a Rainfall-Runoff Relationship (AnnAGNPS 모형의 강우-유출해석력 평가)

  • Choi, Kyung-Sook
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.8 no.2
    • /
    • pp.125-135
    • /
    • 2005
  • Generation and transport of nonpoint source pollution, especially sediment-associated pollutants, are profoundly influenced by hydrologic features of runoff. In order to identify pollutant export rates, hence, clear knowledge of rainfall-runoff relationship is a pre-requisition. In this study, performance of AnnAGNPS model was assessed based on the ability of the model to predict rainfall-runoff relationship. Three catchments, each under different nearly single land use, were simulated. From the results, it was found that the model was likely to produce better predictions for larger catchments than smaller catchments. Because of using the daily time scale, the model could not account for short durations less than 24 hours, especially high intensity events with multiple peak flow that significantly contribute to the generation and transport of pollutants. Since CN information for regional areas has not been built up, a careful selection of CN is needed to achieve accurate prediction of runoff volume. Storm distribution also found to be considered as an important calibration parameter for the hydrologic simulation.

  • PDF

Band-pass Filter based Artificial Filter Bank for Structural Health Monitoring (구조 건전도 모니터링을 위한 대역통과필터 기반 인공필터뱅크)

  • Heo, Gwanghee;Jeon, Joonryong;Jeon, Seunggon
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.25 no.12
    • /
    • pp.843-855
    • /
    • 2015
  • This study developed a band-pass filter based artificial filter bank(BAFB) based on that in order to efficiently obtain the significant dynamic responses. The BAFB was then optimized about the El-centro earthquake wave which was often used in the construction research, and the software implementation of BAFB was finally embedded in the wireless unified management system(WiUMS). For the evaluation of the developed BAFB, a real time dynamic response experiment was performed on a cable-stayed bridge model, and the response of the cable-stayed bridge model was measured using both the traditional wired system and the developed BAFB-based WiUMS. The experiment results showed that the compressed dynamic response acquired by the BAFB-based WiUMS matched significantly with that of the traditional wired system while still carrying sufficient modal information of the cable-stayed bridge. Finally, the developed BAFB was able to reconstruct or re-sample the dynamic response wholly from the compressed response signal, and it can be applied as a new kind of measurement system for a wireless sensor networks based structural health monitoring system that secures both economy and efficiency.

The New Type Pulse Generator Adopted Cascading Technique (소형트랜스의 Cascading 방식을 적용한 임펄스 출력특성)

  • Kyung-Ae Shin;Whi-Young kim;Myeong-Soon Kim
    • Journal of the Korea Computer Industry Society
    • /
    • v.2 no.3
    • /
    • pp.363-368
    • /
    • 2001
  • This paper introduced cascading technique as a new technology composed of two pulse transformers and presented the experimental data and results. To obtain the stable pulse voltage adopted cascading technique, we designed and tested a compact pulse generator by adjusting the load resistors and input voltage. Adopting cascading technique to load, we found that average cascading voltage was about 62$\%$ of theoretical value. Cascading ratio was calculated at almost 19 compared with non cascading voltage.

  • PDF

Spectral Analysis Method for Classification of Liquid Characteristics (액체의 특성 분류를 위한 스펙트럼 분석 방법)

  • Lee, Jonggil
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.12
    • /
    • pp.2206-2212
    • /
    • 2016
  • It is necessary to find characteristic phenomena related with permittivity differences for classification of liquid characteristics. If these phenomena can be remotely detected and characteristics can be extracted, it will be very useful in finding flammable liquid materials and classifying substances of these liquids. Therefore, in this paper, reflection and transmitted signals were analyzed from three receiving antennas with one transmitting antenna using wideband electromagnetic wave signals. Frequency response characteristics of reflected or transmitted signals are different according to characteristics of liquid materials. However, conventional FFT methods cannot be applied due to problems of low resolution caused by data windowing distortion. To minimize these problems, eigenvector analysis method was applied for high resolution spectrum estimation of received signals. From these results, it can be shown that classification of many kinds of liquids are possible using peak frequencies and corresponding peak power values of spectrum estimates obtained from various liquid materials.

A Simulation of the Runoff and the NPS Pollutants Discharge using SWMM Model (SWMM 모형을 이용한 도시 유역의 유출 및 NPS 오염물 배출 모의)

  • 신현석;윤용남
    • Water for future
    • /
    • v.26 no.3
    • /
    • pp.125-135
    • /
    • 1993
  • This study was conducted for two purposes. The first was the selection of the proper model for the urban runoff, and NPS(non-point source) loads and the second was the adjustment of the selected model through the calibration and the verification of the observed data on an urban drainage basin. The selected model for this study was the Storm Water Management Model(SWMM) developed and maintained by the US Environmental Protection Agency(EPA). In particular, the Runoff Block for the surface discharge and the Transport Block for the flow routing was used. The study basin is Youngdu basin, which is a typical developed urban drainage basin. The four rainfall events for the runoff and the two for the four NPS pollutants(SS, BOD, COD and TN) were used for the calibration and the estimation of the model parameters. This study performed the calibration with regard to the peak discharge, the time to peak discharge, the volume and the relative error for three items. It was shown that SWMM can successfully be used for the prediction of the runoff and the NPS pollutants discharge. The result of this study can be used as the basis for the analysis of the correlation between the runoff and the NPS pollutants discharges, and the analysis of the mass balance with the monthly and annual NPS loads in an urban drainage basin.

  • PDF