• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2013

Microbiological populations and the sterility of commercial powdered products treated with gamma irradiation at 0~10 kGy were investigated before using them as ingredients for a non-cooked Saengsik product. We evaluated a total of 14 powdered products: 8 powdered cereals, 3 powdered tubers, and 3 powdered leafy vegetables. The total numbers of bacterial populations in non-irradiated powdered cereals, tubers, and leafy vegetables were 2.7~6.9, 5.6~6.0, and $5.3{\sim}6.8\;log\; CFU{\cdot}g^{-1}$, respectively. Moreover, coliform bacteria were not indicated in adlay, millet, germinated brown rice, soybean, and mulberry leaves powder within detection limit ($2.0\;log\; CFU{\cdot}g^{-1}$). The number of Bacillus cereus exceeded $3.0\;log\; CFU{\cdot}g^{-1}$ (the maximum limit for Saengsik products) in all samples, excluding perilla seeds, buckwheat, barley, oat, potato, and Jerusalem artichoke powder. However, a dose of 6 kGy of gamma irradiation reduced the microbiological populations in all samples, and all the powdered products met the microbial requirements for Saengsik products. Futhermore, it was confirmed that all microorganisms in the 9 powdered products, except fermented brown rice, sweet potatoes, and 3 leafy vegetables, were sterilized by 10 kGy of gamma irradiation.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.2
• /
• pp.147-151
• /
• 2023

Transparent ZnO (100 nm thick) and ZnO/Ti/ZnO (ZTZ) films were prepared with radio frequency (RF) and direct current (DC) magnetron sputtering on the glass substrate at room temperature. During the ZTZ film deposition, the thickness of the Ti interlayer was varied, such as 6, 9, 12, and 15 nm, while the thickness of ZnO films was kept at 50 nm to investigate the effect of the Ti interlayer on the crystallization and opto-electrical performance of the films. From the XRD pattern, it is concluded that the 9 nm thick Ti interlayer showed some characteristic peaks of Ti (200) and (220), and the grain size of the ZnO (002) enlarged from 13.32 to 15.28 nm as Ti interlayer thickness increased. In an opto-electrical performance observation, ZnO single-layer films show a figure of merit of 1.4×10^-11 Ω^-1, while ZTZ films with a 9 nm-thick Ti interlayer show a higher figure of merit of 2.0×10^-5 Ω^-1.

• Journal of Radiation Industry
• /
• v.8 no.2
• /
• pp.77-81
• /
• 2014

Hyaluronic acid is a disaccharide polymer that consists of glucuronic acid and N-acetylglucosamine, and is a glycosaminoglycan. It is widely distributed in animal connective tissue, coexisting with chondroitin sulfate. It forms viscous secretions or gel by bonding to protein in the body, and thus maintains and lubricates tissue structures. In addition, its antibiotic properties are applied to cosmetics and pharmaceuticals. Therefore, it has recently been an object of great interest at cosmetic and pharmaceutical companies. $^{125}I$ has a longer half-life (59.4 days) than many other radioisotopes, and is therefore useful to long-term studies. In this study, a facile and efficient procedure for the synthesis of $^{125}I$-labeled hyaluronic acid has been designed for in vivo imaging and pharmacokinetic studies of hyaluronic acid, which are required for the development of new drugs.

• 한국IT서비스학회:학술대회논문집
• /
• 2006.11a
• /
• pp.556-560
• /
• 2006

u-City는 첨단 정보통신 인프라를 바탕으로 유비쿼터스 정보서비스를 제공함으로써 도시의 문화와 역사를 반영한 환경 친화적이고, 경제적이면서 도시의 가치를 높이는 스마트한 미래형 첨단 도시이다. 그래서, u-City는 신도시를 중심으로 정부와 지자체, 토지개발사업자, 통신업자, 대형 SI, 솔류션 제공사업자에 의하여 수행되고 있다. 하지만 신도시 뿐 만 아니라 기존도시에서도 u-City를 구축할 것으로 기대되며, 도시유형별 IT Infra 구현 방안의 필요성이 요구되고 있다. 따라서 본 논문에서는 미래지향적인 기업유치가 용이하고 경제성을 극대화 할 수 있는 지속 성장 가능한 도시건설을 위하여 환경친화적인 u-City 구현을 위한 도시 유형별 IT infra 구현을 목적으로 한다.

• The Korean Society of Law and Medicine
• /
• v.22 no.4
• /
• pp.159-184
• /
• 2021

The significance of the enactment of the 「Act On The Safety Of And Support For Advanced Regenerative Medicine And Advanced Biological Products」 is to break away from the regulation of the Pharmaceutical Affairs Act and expand patient treatment opportunities through a medical technology approach to regenerative medicine, which is essentially a medical practice called 'transplantation'. However, more than a year after the law was enacted, clinical study has not been activated, with not a single high-risk study approved by the Ministry of Food and Drug Safety being approved. The reason is that despite the legal purpose of expanding patient treatment opportunities, the data requirements for clinical study approval are set in connection with drug development despite the insufficient legal basis, making it difficult for many researchers to meet the data requirements. Prior to the enactment of the Act, submitted data for clinical study on cell therapy products within the Pharmaceutical Affairs Act were cosiderably exempted from quality and non-clinical test data, but with the enforcement of the Advanced Regenerative Bio Act, quality and non-clinical test data are required in accordance with pharmaceuticals when applying for approval of a clinical study plan. To rectify this, when considering the identity of clinical study on advanced regenerative medicine to expand treatment opportunities, recognize that there are limitations in connection with drug development. And it is necessary to preserve the identity of clinical study on advanced regenerative medicine, and on the other hand, in the case of drug product approval, clinical study results should be utilized while specifying usage requirements. Therefore, with the power of the market and the voluntary motive of the clinical researcher, it is necessary to prepare the necessary data by themselves rather than the basic requirements for clinical study approval.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.3
• /
• pp.114-120
• /
• 2024

AA 2026, which is used as an aviation material, is an improved version of 2024 and has higher physical properties, and is a material that has the potential to be applied to supersonic aircraft to be developed in the future. However, when an aircraft exceeds supersonic speeds, the surface heats up and the material must be resistant to this. Therefore, this study confirmed the high-temperature properties of AA 2026, an aviation structural material. AA 2026, solution treated at 500℃ for 4hr, was naturally aged at room temperature for more than 168 hr. Changes in microstructure and physical properties were confirmed over several hours of exposure to 100℃, 200℃, and 300℃, respectively. As a result of microstructure analysis, there was no significant change at 100℃, and from 200℃, GPB, a strengthening mechanism, grew and formed an S Phase. It was confirmed that the S Phase grew as the exposure time increased. Through a tensile test, it was confirmed that physical properties deteriorated as the precipitates grew. However, it was confirmed that the properties were stably maintained at 100℃, which is the temperature when the speed of a supersonic aircraft is less than Mach 2.

• Electronics and Telecommunications Trends
• /
• v.12 no.3 s.45
• /
• pp.11-17
• /
• 1997

ITS(Intelligent Transportation System)는 H/W 중심의 차량 및 교통 기반 기설에 통신.전자.제어.컴퓨터 등 S/W 중심의 기술을 적용하여, 각 차량 및 교통 시설(신호등, 도로, 교통 안내 표지판, 도로 상황판 등)들이 상호 보완적으로 작동할 수 있게 함으로써, 기존의 도로 교통 시설의 이용 효과를 극대화하고, 그 안정성을 향상시키며, 교통 수요 관리를 목적으로 사용자에게 교통 정보를 제공하는 지능형 종합 기술 체계이다. 이러한 최첨단 도로교통 관리의 ITS를 이용한 서비스는 각 나라마다 달리 정의되는데, 우리나라에서는 첨단교통관리시스템(ATMS), 첨단교통정보시스템(ATIS), 상용차량 운행관리 시스템(CVO), 차량 및 도로 시스템(AVCS) 그리고 첨단 대중교통 시스템(APTS)의 5개 분야로 나누어진다(1). 이 다섯가지 ITS 서비스 시스템은 공통적으로 정보 수집, 정보 처리, 정보 전달, 정보 통신 기능을 가지고 있다. 즉, 각종 검지기, 차량 단말, 노변 단말 등의 수집 장치에서 수집된 정보(정보 수집)는 관련 통신 방식(정보 통신)을 통하여 중앙 정보 처리 센터에 전달되어 그 서비스 요구 사항에 따라 처리(정보 처리)되고, 생성된 정보는 해당되는 통신 채널을 거쳐(정보 통신) 각종 사용자 단말기에게 제공(정보 전달)된다. 본 논문에서는 이와 같은 ITS체계의 정의, 목표 및 서비스 종류에 대하여 설명하였으며 교통 정보를 수집하고 처리하여 전달하는 과정과 이에 요구되는 통신 체계에 대하여 알아본다.

• Electronics and Telecommunications Trends
• /
• v.19 no.3 s.87
• /
• pp.125-135
• /
• 2004

차세대 통신망 기술은 개별망에서 단일망인 광대역통합망으로 발전되어 가고 있는 추세이며, 향후 유. 무선 통합 및 방송. 통신 융합이 가능한 IP 기반의 멀티네트워크로 통합될 것이다. 본 고에서는 우리나라가 주도하고 있는 국내, 국제 연구망과 해외 여러 나라들이 추진하고 있는 연구개발망에 대해 살펴보고 첨단 연구개발망을 활용하여 연구개발하고 있는 주요 사항들 즉, IPv6, Measurement, Multicasting, VoIP 같은 네트워킹 기술과 바이오, 나노, 의료, 기상, 교육, 환경 연구 등 과학기술 전반에 걸쳐 6T를 포괄하는 첨단기술을 연구하는 연구개발망에 대한 동향 분석과 IT 분야의 핵심기술과 인프라 제공을 위한 BcN 기반의 연구시험망 구축 방안에 대해 살펴본다. 이러한 첨단 연구개발망은 지속적인 성장과 글로벌시대의 고부가가치 창출을 위한 차세대 연구망으로 미래 선도기술을 배양하는 역할을 수행하는 핵심기술개발과 상용화와 연구개발 기술간의 격차를 줄임으로써 개발기간의 단축과 가격경쟁력을 향상시킬 것으로 사료된다.

• Journal of Radiation Industry
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2014

In this study, we prepared CdTe/CdS solar cells using a thermal vacuum evaporation method. In particular, $CdCl_2$ treatment was attempted using this same method at $400^{\circ}C$ for 30 min. The prepared CdTe/CdS solar cells were investigated using Fouier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FE-SEM), and a solar simulator system including light absorption properties, morphological properties, and power conversion efficiency (PCE). In addition, we investigated the gamma-irradiation treatment at dose rates of 0 Gy, 500 Gy, 1 kGy, 10 kGy, and 30 kGy. The characteristics of gamma-irradiation treatment were studied based on the same method described above. In particular, it showed increased values as 0.826% higher than the non-irradiation of 0.448% from PCE analysis.

• Journal of Biomedical Engineering Research
• /
• v.43 no.6
• /
• pp.399-408
• /
• 2022

Because arrhythmia occurs irregularly, it should be examined for at least 24 hours for accurate diagnosis. For this reason, this paper developed firmware software for arrhythmia detection and prevented consumption of temporal and human resources and enabled continuous management and early diagnosis. Prior to the experiment, the interval between the R peaks of the QRS Complex was calculated using the Pan-Tompkins algorithm. The developed firmware software designed and implemented an algorithm to detect arrhythmia such as tachycardia, bradycardia, ventricular tachycardia, persistent tachycardia, and non-persistent tachycardia, and a data transmission format to monitor the collected data based on BLE. As a result of the experiment, arrhythmia was found in real time according to the change in BPM as designed in this paper. And the data quality for BLE communication was verified by comparing the sensor's serial communication value with the Android application reception value. In the future, wearable devices for real-time arrhythmia detection will be lightweight and developed firmware software will be applied.