• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.139-150
• /
• 2010

Recently, full-scale research about a passenger tube train system is being progressed as a next-generation transportation system in Korea in light of global green technology. The Korea Railroad Research Institute (KRRI) has commenced official research on the construction of a tube train system. In this paper, we studied various parameters of the tube train system such as the internal tube pressure, blockage ratio, and operating speed through computational analysis with a symmetric and elongated vehicle. This study was about the aerodynamic characteristics of a tube train that operated under standard atmospheric pressure (open field system, viz., ground) and in various internal tube environments (varying internal tube pressure, blockage ratio, and operating speed) with the same shape and operating speed. Under these conditions, the internal tube pressure was calculated when the energy efficiency had the same value as that of the open field train depending on various combinations of the operating speed and blockage ratio (the P-D relation). In addition, the dependence of the relation between the internal tube pressure and the blockage ratio (the P-${\beta}$ relation) was shown. Besides, the dependence of the relation between the total drag and the operating speed depending on various combinations of the blockage ratio and internal tube pressure (the D-V relation) was shown. Also, we compared the total (aerodynamic) drag of a train in the open field with the total drag of a train inside a tube. Then, we calculated the limit speed of the tube train, i.e., the maximum speed, for various internal tube pressures (the V-P relation) and the critical speed that leads to shock waves under various blockage ratios, which is related to the efficiency of the tube train (the critical V-${\beta}$ relation). Those results provide guidelines for the initial design and construction of a tube train system.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.157-167
• /
• 2005

Seoul metropolitan public transport reform results in the introduction of the semi-public operation and distance-based fare policies. With implementation of these policies, public transport revenue allocation has been (will be) evolved very complicated because the existing revenue allocation issues have not only been clearly solved, which is generated by the combined relationship among Korea Railroad Corporation (KRC). Seoul Metropolitan Subway Corporation (SMSC). Seoul Metropolitan Rapid Transit Corporation (SMRTC), and Incheon Rapid Transit Corporation (IRTC), but also the revenue allocation problem between bus and urban railroad-related organizations need to be considered in this combined framework. On top of that. based on the future plans such as the private sector's railroad construction plan(s), the light rail transit construction plans of several local governments and the join of remained bus lines of Seoul metropolitan areas, it is understood that the revenue allocation among public transport operating organization will become one of main issues of operation organization as well as local and central governments. As a basic approach for revenue allocation of public transport operation organizations, the purpose of this paper is to propose an integrated model applicable to estimate degree of service contribution in passenger carriage in the combined public transport network. With a hypothesis that the complete electronic card system is deployed, this paper supposes every passenger's loading and alighting stations is recordable. Thereby, this paper limits research scope as to Seoul metropolitan railroad area since used route(s) between origin and destination stations can not be traceded because transfer stations each passenger path through is not recorded. Each model proposed in the paper is as follows: 1. a generalized cost reflecting passenger's transfer behavior; 2.a K path model for determining similar routes between O-D; 3.an assignment model for loading O-D trips onto the detected similar routes using Logit Model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.9-17
• /
• 2017

Ensuring the safety of automobiles and trains during system operation is regarded as indispensable due to the progress in unmanned operation. The automotive functional safety standard, ISO 26262, has been proposed to ensure the safe design of vehicles. This standard describes in detail the required risk analysis and evaluation procedure and safety measures, while appropriately reflecting the system design information. Therefore, much research has been done on the risk analysis procedure, wherein the design information is mostly extracted from physical components of similar systems already in operation, the information traced back to obtain constituent functions, and then methods of identifying risk sources are studied. This method allows the sources of risk to be identified quickly and easily, however if the design requirements are changed or systems are newly developed, others may be introduced which are not accounted for, thereby yielding mismatched design information. To resolve this problem, we propose a top-down analysis in order to utilize the system design information appropriately. Specifically, a conceptual system is designed to obtain the functions, which are then analyzed. Then, a function-based fault tree analysis is conducted, followed by a risk source analysis. In this paper, a case study of automotive safety is presented, revealing that the proposed method can analyze the risk sources with reduced possibility of omission by systematically reflecting the system design information.

• Electronics and Telecommunications Trends
• /
• v.23 no.6
• /
• pp.22-31
• /
• 2008

화석연료를 개발함에 따라 인류는 과거보다 풍요한 물질문명을 누리게 되었으나 그 부작용으로 지구 온난화라는 현실적 재난에 직면해 있다. 점점 뜨거워지는 지구를 식히기 위해 세계적으로 당장 시급한 대책은 화석연료의 생산, 수송 및 소비에 있어서 효율을 높이고, 에너지를 절약함으로써 온실가스를 감축하는 것이다. 하지만 궁극적으로는 신재생 에너지와 같이 온실가스를 배출하지 않는 지속 가능한 에너지원을 사용함으로써 청정한 미래형 산업 시스템이 이루어야 한다. 에너지의 해외의존도가 97%에 육박하고 있는 우리나라의 입장에서 세계적으로 연평균 전력발전량의 약 20%를 담당하고있는 수력, 풍력, 조력 발전은 에너지 자급에 의한 수급 안정성 확보 측면에서 중요한 의미를 가진다. 특히, 화력 및 원자력과 비교할 때 환경에 대한 영향이 거의 없는 청정한 에너지로서 개발이 유망한 에너지이다. 대규모 수력발전은 대형 댐의 건설로 인한 환경.생태적 문제점이 있을 수 있으나, 풍력과 조력발전은 상대적으로 환경에 미치는 영향이 작은 편이다. 본 보고서에서는 최근 연구되고 있는 신재생 에너지 중 전기활성 고분자(EAP)를 이용하여 조력이나 유력, 풍력을 이용하여 청정 에너지를 생산할 수 있는 방법에 대하여 논하고자 한다.

• Journal of Hydrogen and New Energy
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2010

In this study, the structural analysis was performed to optimize the membrane humidifier with hollow fiber membrane for polymer electrolyte membrane fuel cell system. The main design factors were considered by evaluating the humidifying performance according to various structural parameters such as packing density and length. The effects of operation conditions of membrane humidifier were also elucidated experimentally. Results imply that there are optimum points for the packing density and length of humidifier. It was also found that among operation conditions, relative humidity of wet exhaust gas and temperature of dry inlet gas have major effects on the humidifying performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2738-2744
• /
• 2014

For balanced development of the Sejong City, early settlement in transport infrastructure should precede the most. Of various means of transport, this study focus on BRT(Bus Rapid Transit) and the railway. Than the subway construction costs only a tenth. Equipped with a system of underground transport capacity to significantly increase the new concept of public transport in the BRT, utilizing the existing line railway to be constructed broad Chungcheong. The extension revolves 1 line of Daejeon subway to Jeongbuse kind government complex and the communication facilities is cooked for the rapid increase in the transportation demand according to the before central administration organization and Sejong city inflow of population.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.565-570
• /
• 2024

Recently, due to adjacent excavation work such as new buildings and common tunnel expansion concentrated around the urban railway, deformation of the underground box and tunnel structure of the urban railway built underground has occurred, and as a result, repair and reinforcement work is frequently carried. In addition, the subway is responsible for large-scale transportation, so ensuring the safety and drivability of underground structures is very important. Accordingly, an automated measurement system is being introduced to manage the safety of underground box structures. However, there is no analysis of structural damage vulnerabilities caused by subsidence or uplift of underground box structures. In this study, we aim to analyze damage vulnerabilities for safety monitoring of underground box structures. In addition, we intend to analyze major core monitoring locations by modeling underground box structures through numerical analysis. Therefore, we would like to suggest sensor installation locations and damage vulnerable areas for safety monitoring of underground box structures in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.711-717
• /
• 2017

The railway is a public transportation system that provides large-scale passenger transportation and service, whose reliability and safety is the top priority. The wiring of railway vehicles is classified into train control lines (train lines) and communication lines. The train lines are used for input / output signals related to vehicle driving and safety functions, and the communication lines are used for the input / output signals for passenger services such as broadcasting. In order to measure the reliability of railway vehicles, a train line is applied to the input / output interface of the control signals between the electric control devices in the vehicle, and there are many electromechanical devices such as relays and contactors for the control logic. In fact, since the vehicle control circuit is composed of several thousand contacts, it is difficult to check for errors such as contact failure, and it is impossible to check the real-time status, so a lot of manpower and time is required for regular maintenance. Therefore, we analyze the current state of the train line design of the electric equipment used for driving and services in domestic railway cars and propose three wiring reduction methods to improve it. Based on the analysis of domestic electric vehicles, it was confirmed that the wiring reduction effect is 35% or more.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.131.2-131.2
• /
• 2010

SOFC 발전 시스템은 친환경 고효율 에너지 발전 미래 에너지기술로서 개발의 초점이 되고 있다. SOFC는 연료전지 발전 기술 중 최고효율과 최장 수명을 가지며 유일하게 기존 발전기술과 가격 경쟁이 가능한 것으로 알려지고 있다. 현재 분산 발전용으로 개발이 진행되고 있으며 향후 중앙발전, 휴대용, 가정용 및 수송용 등으로 그 시장이 확대될 것으로 예상된다. 분산 발전 SOFC 개발을 위해서는 시스템 Scale-up이 기술 확보가 관건이며 특히 스택 제조 비용의 2/3 이상을 차지하는 대면적 단전지 제조 공정 기술 개발이 필요하다. 단전지 대면적화는 원가 절감 및 성능 개선을 기대할 수 있게 하므로 분산 발전 SOFC 상용화를 위한 핵심 기술이라 할 수 있다. 그러나 기존의 국내 SOFC 연구는 시스템이나 소형 단전지 위주로 진행되어 왔으며 대면적 단전지 제조를 위한 핵심 공정 기술에 대한 연구는 취약한 상황이다. 또한 랩스케일의 소규모 연구를 뛰어넘는 양산 기술 개발에 대한 연구는 전무한 실정이다. 또한 재료 및 공정 적합성을 요구하는 대면적 SOFC 단전지의 양산 기술 개발을 위해서는 원료 분말 및 기초소재의 국산화를 통한 제조 공정 윈도우를 확대하여 제조 수율을 향상하는 것이 매우 중요하다. 본 논문에서는 그동안 포스코파워(주)에서 대면적 SOFC 단전지 양산 기술 개발을 위해 추진 중인 $400cm^2$급 대면적 SOFC 단전지의 제조 및 성능에 대한 연구 결과를 발표하고자 한다. 또한 대형 단전지 제조 공정의 재현성, 상용화 수준의 성능, 내구성 및 경제성 확보를 위한 공정 개선을 위한 포스코파워(주)의 연구 현황 및 양산 기술 확보를 위한 제조 윈도우 확보 전략에 대해 발표하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2385-2390
• /
• 2015

In the beginning run, urban railway had been required as transportation. But now days urban railway have stayed in the platform for long time, the platform is faced the problem that is improvement of environment as one of the living space. Thus, sliding automatic door on the basis of screen door have used in huge distribution market, hospital, restaurant and public office because it is comfortable that customer's convenience and entrance are controled. So screen door not only requires customer's convenience and safe, clean area and energy conservation but demands optimal design technology development of screen door system that is confirmed by element parts of design and confidence. In this paper, For secure confidence of screen door, after as modeling roller and frame's system, confirming the result for qualification of driving stiffness. And then it suggests that it is possible to increase performance and declines fraction defective of element's part.