• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.230-235
• /
• 2009

We have conducted an experimental study to analyze characteristics of the wheel profile wear and an influence of the wheel flange wear on the vehicle's vibration characteristics. In experiment with EMU, wheel profile wear is severe at the beginning of the commercial operation. In this stage, the variations of the wheel dimension parameters and equivalent conicity is changed rapidly. Along with a mileage of the test vehicle, the wear of the wheel flange is increased and also the vibration level of the car-body is increased. The peak-peak mean value of the body vibration is estimated as good level, but the level is approached at the limit of the good level as mileage increases. Especially, the peak-peak maximum value of the body vibration shows the distinct increase of vibration level.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.85-92
• /
• 2013

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. The main contributors to rolling noise are the sleepers, rail, and wheels. In order to analyze and predict rolling noise, it is necessary to understand the vibrating behaviors of railway tracks, as well as of the wheels. In the present paper, theoretical modeling methods for railway track are reviewed in terms of rolling noise; these methods are applied for the three representative types of domestic railway tracks operated: the conventional ballasted track, KTX ballasted track and KTX concrete track. The characteristics of waves propagating along rails are investigated and compared among the types of tracks. The tracks are modeled as discretely supported Timoshenko beams and are compared in terms of the averaged squared amplitude of velocity, which is directly related to the sound radiation from the rails.

• Tunnel and Underground Space
• /
• v.16 no.4 s.63
• /
• pp.288-295
• /
• 2006

In this study, dynamic behavior of the vehicles is analyzed, while the track is subjected to lateral vibrations due to earthquake and blasting load. A computer program(WERIA, Wheel Rail Interaction Analysis) is used, which can simulate dynamic responses of vehicles subjected to lateral vibrations. The analysis considers two types of vehicles: I.e. power cars of KTX and Busan subway train. It can also consider the interaction with sub-structures such as tracks and soil. The creep force module is considered, and the running safety of railway vehicles subjected to earthquake and blasting loading is studied. Based on the results of this study, the running safety of the vehicles can be confirmed against lateral vibration.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1757_1758
• /
• 2009

본 논문에서는 철도차량의 능동조향시스템 연구를 위한 축소 조향대차의 장애물 검지시스템 구축에 대여 연구하였다. 철도차량에서 능동조향이란 곡선부 주행 시 차륜/레일 접촉에 의한 승차감 저하 및 차륜/레일의 마모와 소음을 줄이고, 고속주행을 위한 조향성능 및 주행안정성을 확보하기 위한 휠셋의 제어기술이다. 따라서 논문에서는 조향제어전략 및 제어기법을 연구하기 위한 축소 차량모델(견인대차와 조향대차로 구성)의 개발과정으로서 자동운전을 위한 장애물 검지시스템에 대한 연구를 수행하였으며 주행실험을 통해 그 성능을 검증하였다.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.656-662
• /
• 2003

The rolling-stocks used in conventional line have suffered wheel problems due to lack of adaptability with track. These brought out severe wheel wear and inefficiency of wheel maintenance. Especially, tight wheel maintenance criteria have caused waste factors of wheel machining, these increases rolling-stock maintenance costs. Thus, this study was started to Propose the wheel maintenance plans to improve maintenance efficiency in respect to wheel maintenance process in rolling-stock workshop. Here, we describe some results

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.579-584
• /
• 2008

A novel nondestructive testing (NDT) system, which is able to detect a crack with high speed and high spatial resolution, is urgently required for inspecting small cracks on express train wheels. This paper proposes an improved signal processing circuits, which uses the multiple amplifying circuits and the crack indicating pulse output system of the previous scan-type magnetic camera. Hall sensors are arrayed linearly, and the wheel is rotated with static speed in the vertical direction to sensor array direction. Each Hall voltages are amplified, converted and immediately operated by using, amplifying circuits, analog-to-digital converters and $\mu$-processor, respectively. The operated results, ${\partial}V_H/{\partial}t$, are compared with a standard value, which indicates a crack existence. If the ${\partial}V_H/{\partial}t$ is larger than standard value, the pulse signal is output, and indicates the existence of crack. The effectiveness of the novel method was verified by examine using cracks on the wheel specimen model.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.618-623
• /
• 2006

Understanding the contact between wheel and rail is a starting point in railway vehicle dynamic research area and especially analysis for the contact geometry between wheel and rail is important. On the one hand, the critical speed as the natural characteristics of rolling-stock is generally tested on the roller rig. The geometrical characteristics of the wheel/roller contact on the roller rig are different from these of the general wheel/rail contact because the longitudinal radius of roller is not infinite compared with rail. Thus, in this paper we developed the algorithm to analyze the wheel/roller contact geometry of our roller rig which is constructed now and analyzed the difference between whee/roller contact and wheel/rail contact. In conclusion, we found that the yaw motion of wheelset and the roller radius influence the geometrical contact parameters in wheel flange contact area.

• Journal of the Korean Society for Railway
• /
• v.8 no.5
• /
• pp.477-482
• /
• 2005

Through a year's commercial operation, Korea High Speed Railway has solved defectives from several breakages at the beginning and is going into the stage of stable operation. Among issues, wheel wear becomes a matter of primary concerns in view of vehicle's stability and maintenance. It was understood as above that wear status has been improved in the test by which railway system including vehicles and tracks was stabilized during a year's commercial operation, comparing to that with excessive wear in the trial operation prior to opening to the public. To make out wheel's wear status and characteristics of equivalent conicity at present when the service has been introduced a year ago and the average cumulative mileage of vehicles reach almost 500,000km, wheel's wear types were analyzed with the current vehicles in service.

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1128-1133
• /
• 2006

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1118-1123
• /
• 2006