• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.149-154
• /
• 2006

우리나라의 '국토 종합 물류 네트워크' 구축에 기존의 항만, 도로, 철도 중심의 물류 체계에, 국토의 삼면이 바다로 둘러싸여 있으므로 주요 항만과 연계하는 국토 내륙은 물류 수송체계와 주요 강(江)이 수로(水路)유역의 광역권 및 주요 도시가 연결되어 있기 때문에 수로를 이용한 물류수송체계와 통합한 종합적인 국토 물류 수송체계에 대한 연구가 필요하다. 이 연구에서는 파워심시뮬레이션 기법을 이용하여 우리나라의 수로운송을 통한 국토종합물류체계망 구성방향을 도출하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1562-1564
• /
• 2005

The study for ubiquitous computing infra is proceeding actively, it make possible to use service and access network anywhere, anytime because of wire/wireless communication technology and progress of hardware. Domestically, study for the network mobility support technology which is the key technology for future ubiquitous computing realization have progressed, but that is insufficient. Especially, there is no study for independent mobility support study about railway wireless network. So, this study propose network mobility management technology for mobile network infra in railway and proper network model in train.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.388-396
• /
• 2016

The metropolitan subway network of Seoul has gone through many evolutionary processes in past decades to disperse the floating population and improve the traffic flow. In this study, we analyzed how the structural characteristics and the efficiency of the subway network have changed according to the dynamic evolutionary processes of the metropolitan subway network of Seoul. We have also proposed new measures that can be used to characterize the structural properties of the subway network more practically. It is shown that the global efficiency is about 74%, which is higher than those of subway networks of foreign countries. It should also be considered that passenger flow between stations is even higher, at about 85%. Since the private lines, including line 9, the New Bundang line, the Uijeongbu line, and the Ever line do not release their traffic data since September, 2013, only 5 years of data from September, 2008 to September, 2013 is available. So, in this study we limit the analysis period to these 5 years.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2011

Recently, in the era of low carbon and green growth, the importance of railway transportation is being emphasized However, there is a lack of research on simulation for railway depot. This paper presents the development of the dynamic simulator for LRT(Light Rail Transit) depot. This study presents explanations of requirement analysis, architecture, database design, simulation algorithm, and design and development of the simulation tool. The dynamic LRT depot simulation tool consists of four modules; a Network Editor to create and modify information regarding railroad, train, signal, turnout, job and station, a Simulator to calculate train movement algorithm, a Reporter to show simulation results in table and graphs, and an Animator to animate simulation results dynamically. It is hoped that this study on general details of structure, design and development of LRT depot dynamic simulator will perform as a good reference to future development of new simulation tools.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.241-245
• /
• 2013

In the case of the existing train control system, the driver monitors the condition of the vehicle through a composite controller device that displays various information on a screen in the vehicle. However, when problems arise such as car trouble, it is difficult for the drivers to take action immediately. In addition, maintenance personnel have to manually save data one by one after storing the vehicle to analyze control information of the main devices such as the brake controller and auxiliary power. To improve these points, a system that sends and receives all information in real time should be established by installing a sensor communication network and a surveillance system. This study attempts to improve the safety and maintenance of rail vehicles by suggesting a standardized method for train control and surveillance system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.518-523
• /
• 2008

Using network communication, KTX OBCS is KTX's core device which inspects operation status of various electric equipments and supports driving command, train control, train's maintenance, train crew's driving. Since this device is manufactured as specialized system, being dependent on TGV manufacture specification and France's high speed train operation method, actual technic transfer is difficult. Therefore, there are many difficulties, since most of interface signals are connected with OBCS when function improvement, maintenance, various electric equipments(propulsion control device, auxiliary power supply device, door control device etc.) are replaced with localized ones, which are required in operational view after introduction of KTX. Ergo, this study would like to contribute to function improvement and maintenance's efficiency, furthermore to realize technical independence, escaping from dependency of developed foreign technology in high speed train and electric equipments, through KTX OBCS' function analysis and mutual interface information analysis with peripheral device(driver console, PID system, fault display device, various electric equipments).

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.513-518
• /
• 2008

Currently, urban areas face congestion problems that diminish personal mobility and freight-transport productivity. An increasing number of experts suggest that separating freight traffic from passenger traffic makes sense in terms of economics, the environment, and safety. Some experts suggest that tube transportation is the solution. The objective of this paper is to evaluate the potential benefits and limitations of tube transportation system as a viable mode of transport that can alleviate congestion on roadways. Specifically, this research employs theoretical and practical method identifying, evaluating, and selecting appropriate freight pipeline systems; evaluating the technical and economic feasibility of tube transportation; and estimating environmental, energy, and safety benefits.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.36-43
• /
• 2019

In this paper, a novel channel access scheme for the next-generation vehicle to anything (V2X) system based on IEEE 802.11p standard which is applied to recent connected car technologies is suggested and analyzed. The proposed scheme proposes a channel access method utilizing OFDMA multi-user transmission for IEEE 802.11p based system. In this paper, the authors examine geographical distance and network area performance of IEEE 802.11p system and the proposed scheme. Results of this research show that the proposed scheme is quite suitable for improving conventional V2X standards and systems. This paper also provides mathematical analysis and simulation results of the conventional IEEE 802.11p system and the proposed scheme.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.15-36
• /
• 2015

The purpose of this paper is "A Study on the Establishment of Distribution and Logistics System in the unified Korea". The main conclusion of this paper are as follows : North and South Korea shall conjunctionally foster the exchange and cooperation area and operate the joint pilot project to combine distribution and logistics system. To solve the problems of the maritime affairs, Fisheries, and international logistics, the cooperative agreement between North and South Korea will be needed to protect and develop of shipping, aviation and shipbuilding industry. Unification of two Koreas must be prepared as stage by stage ; ${\cdot}$Stage1(preparation period) : initiation of peace area. ${\cdot}$Stage2(development period) : forming the exchange and cooperation area ${\cdot}$Stage3(settlement period) : establishing peace belt on border area. After the unification, two Koreas must plan and undertake the construction of the distribution and logistics infrastructures, establishment of SCM system through Network and the connection to China through railway and road Network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.400-402
• /
• 2019

The electric point machine, which is used for the control of the turnout used to change the track of the train, is very important in the railway system. Various wired and wireless real-time monitoring systems are used to check the status of the point machine, but there is a possibility of malfunction due to sensor or network error. In this paper, a redundant monitoring system was designed that incorporates the point machine monitoring system and the CCTV camera control system to double check the operation of the point machine. In the point machine monitoring system, the operating state of the railway converter is monitored, alarmed and transmitted over the network. The CCTV camera control system, which received this information, was required to record the status of the turnout and the point machine in question and send it to the administrator. The manager of the railway line can check the conversion status of the railway through the monitoring screen for the railway line switcher first, and then confirm the switching status directly through the CCTV camera image, thereby improving the reliability of the point machine operation. It will also enable the safe and efficient operation of personnel for management. It is expected to contribute to preventing a derailment caused by a malfunction of the point machine.