• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.836-845
• /
• 2017

Due to the development of endoscopic technology, endoscopic diagnosis and procedures have been actively performed. However, due to the increase in colorectal cancer and the effect of government's early cancer screening project, the number of endoscopic diagnosis and procedures has increased, thus medical accidents such as perforation and bleeding are increasing. Therefore, efforts to reduce such medical accidents are needed. In this paper, we propose a method to provide the direction information of the endoscope and the force applied to the probe in real time. We also propose and evaluate an interpolated complementary filter considering the very slow movement of the endoscope probe. The proposed interpolated complementary filter showed 34.6% and 27.6% performance improvement. The expected user interface for applying the proposed method to the endoscopic system is also presented. This shows that the proposed method is applicable to endoscopy system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.193-198
• /
• 2013

In general, a product consists of one or more parts. Different parts of a product can perform the same function. According to "the design hypothesis of an integrated part", parts having the same function may be integrated into one part. A part can also perform more than one function. The form or material characteristic of a part may perform its function. In this study, we develop a method for defining the functions of components and for integrating parts having the same functions. We have successfully integrated some parts of a three-hole punch using the proposed method. The results satisfy axiomatic design.

• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.8-12
• /
• 2006

The effects of packaging treatments with either low density polyethylene (LDPE) or polypropylene (PP) films on the quality of leaf lettuce were evaluated. It was also stored within a plastic bag (LDPE and PP films) with 4 pelf orated holes (6mm diameter). Changes in weight loss, color difference, anthocyanin, chlorophyll, water content, and general appearance (shape of lettuce) ware investigated Total weight of leaf lettuce packaged within non-pelf orated films decreased slowly over the storage periods at 5 and $20^{\circ}C$. The weight loss of leaf lettuce showed no significant difference between non-pelf orated and perforated films at $20^{\circ}C$. General appearance in leaf lettuce stored at $20^{\circ}C$ was not significantly affected by packaging treatments with LDPE and PP films. The shelf life of non-packaged leaf lettuce at $5^{\circ}C$ was 8 days, whereas packaging treatments with LDPE and PP films showed freshness in leaf lettuce for 30 days of storage. Total chlorophyll and water contents of leaf lettuce packaged within pelf orated and non-pelf orated films decreased gradually during storage. However, no remarkable changes in color difference, levels of chlorophyll and anthocyanin, and water contents were observed in leaf lettuce packaged within perforated and non-pelf orated films. In this experiment, leaf lettuce packaged within LDPE or PP films without any punching holes at $5^{\circ}C$ was the most desirable for extending the quality. These results suggest that non-pelf orated packaging treatment in combination with low storage temperature could be effective in prolonging the shelf life of leaf lettuce

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.13-19
• /
• 2014

Purpose: To evaluate the effectiveness of ultrasonography-guided combined multiple needling and high-energy extracorporeal shock wave therapy (ESWT) for calcific tendinitis of the shoulder. Materials and Methods: We included 42 calcific tendinitis patients who underwent ultrasonograpy-guided multiple needling followed by high-energy ESWT who visited the clinic from January 2010 to June 2013. The average follow up period was 45 weeks. Clinical evaluation was done before and after 12 weeks from treatment, in clinical terms using pain visual analogue scale (P-VAS), ASES, UCLA scores reflecting performance and symptom improvement, and in sonographic terms by studying the changes in size of the calcific nodules. Results: A statistically significant improvement was seen in P-VAS, ASES, UCLA scores and decreased calcification size on sonographic evaluation. Conclusion: Ultrasonography-guided combined multiple needling and high-energy ESWT is considered as a useful method which could provide clinical function improvement and reduction of calcification deposit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.260-268
• /
• 2012

The use of an error-correcting code is essential in communication systems where the channel is noisy. Unless a receiver has accurate channel coding parameters, it becomes difficult to decode the digitized encoding bits correctly. In this paper, we propose two algorithms for reconstructing convolutional codes: one for general convolutional codes and the other for punctured convolutional codes. And we also verify the algorithms by performing intensive computer simulation in additive white gaussian noise (AWGN) channel.

• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.215-220
• /
• 1999

To find out the temporal and spatial variations in contents of sugar, phenolic compounds and mineral, the sap of Acer mono MAX. were harvested from several regions and periods, and those contents were determined by solvent fractionation, TLC, HPLC and atomic absorption spectrophotometer. Most of all the free sugar contained in the sap of Acer mono MAX. was sucrose, with range of 1.35 to 3.41%. The content of total phenolic compound in the sap of Acer mono MAX. was distributed from 0.034 to 0.151 mg/100m1, and most of phenolic acid was phloroglucinol. The contents of Na, K, Ca and Mg were ranged from 24.11 to 33.15, from 13.75 to 22.10, from 47.19 to 88.00 and from 2.48 to 6.31 ppm, respectively. Contents of sugar, phenolic compounds and mineral decreased sharply at the later harvest. Comparing two different methods of the sap harvest, bore method and groove method, the contents of compounds in the study were determined higher with groove method.

• Solar Energy
• /
• v.11 no.1
• /
• pp.3-15
• /
• 1991

In this study global radiation and global illumination are directly measured and diffuse radiation and diffuse illumination measured utilizing semi-circular shadow ring. By analyzing measured radiation data, clear and overcast sky are classified according to the sky classification method used in Mantes, France. Measured illumination data are analyzed and 1) Clear sky illumination on a horizontal surface as a function of solar altitude. 2) Overcast sky illumination on a horizontal surface as a function of solar altitude, 3) Monthly variation of illumination. 4) Cumulative percentage of illumination, 5) Daylight intensity as a function of hours in a typical day, 6) Average number hours per day of illumination above 10 and 20klx are presented as a climatic data for daylighting design for Seoul, Korea.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.193-199
• /
• 1987

Simple estimating method of rock drilling and blasting work size is necessary to apply as a guidance of general road plan and a cost analysis of mountain forest road construction. For this work study, 11 cycles were divided in 5km route at Hyeonnammeon Yangyang-gun and the mountain slope at every 20m interval was measured. During working days all kind of works concerned on drilling and blasting was investigated in every cycle. Depending on the simple work study results it's work size can bef estimated with high correlation between drilling length in meter and frequency percentage of mountain slope more than 70%. With total drilling length known the machinery hours, drillers and explosive quantify can be estimated by the regression with high correlation. Estimation of drilling and blasting work by mountain slope gradient in road route is proposed like table 5 with estimating value of machinery hour, drillers and explosive in granite gneiss region.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.135-147
• /
• 2019

This paper introduced a impact load estimation method by examining vibration transfer path analysis (TPA). The theoretical background and the load quantification procedure are explained, and a case study of hydraulic breaker is reported. We explained the merits and limitations of the load estimation method of TPA, and improvement method was suggested through case analyses of drilling equipment. The necessity of R&D of load-estimation technology was discussed. A new strategy for developing new techniques for impact load measurement was proposed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.117-124
• /
• 1994

A study was conducted to dectermine the days with optimum soil moisture after drainage or rain for machine workability and seeding establishment on dry seeding in paddy soils(Jeon buk Series, Haplaquepts). The results are summarized as follows. 1. The possible days of tractor-rotary plough were 5days or more for non-mole hole plot(control). The possible days were 2~4days and the optimum days were 5~6days for mole hale plat. 2. The ratio of soil clod(<1cm) was 1 % and 15% for control and mole hole plats, respectively. The optimum soil moisture range for seeding establishment was 31~32% in this soils. 3. The possible days of combine harvesting work were 9days and 5days after drainage for control and mole hole plots, respectively. 4. Soil physical properties were improved but soil organic matter calcium and magnesium in the soil were decreased in the mole hole plats. 5. Yield was 415kg/10a at seeding after 6day drainage in control and 440kg/10a at seeding after 4day drainage in the mole plots.