• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.283-286
• /
• 2009

척추경 나사못을 이용한 요추 유합술은 가장 보편적으로 사용되어지는 수술적 치료 방법이다. 과거 여러 연구들에서 이러한 척추 유합술의 임상적 우수성은 이미 입증 되었으며, 척추경 나사못은 시술 부위의 운동을 완전히 제한함으로써 높은 유합율을 얻을 수 있으나, 상대적으로 인접 분절의 조기 퇴행성 변화의 요인 중 하나로 보고되고 있다. 따라서 본 연구에서는 유한요소해석 방법을 이용하여 척추경 나사못 시술에 따른 척추체의 운동범위 및 인접 분절 추간판의 스트레스 증가량을 계산하였고, 척추경 나사못 모델과 유합 후 나사못 제거에 따른 모델 또 시술하기 전 정상모델과 비교하여 생체 역학적 측면에서 분석하여 척추경 나사못을 이용한 요추 유합술 후, 척추경 나사못의 제거의 임상적 효과와 그 이론적 근거를 제시하고자 한다.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.664-667
• /
• 2008

Since the advent of pedicle screw fixation system, posterior spinal fusion has markedly increased This intemal fixation system has been reported to enhance the fusion rates, thereby becoming very popular procedure in posterior spinal arthrodesis. Although some previous studies have shown the complications of spinal instruments removal, i.e. loss of correction and spinal collapse in scoliosis or long spine fusion patients, there has been no study describing the benefit or complications in lumbar spinal fusion surgery of one or two level. In order to clarify the effect of removal of instruments on mechanical motion profile, we simulated a finite element model of instrumented posterolateral fused lumbar spine model, and investigated the change of mechanical motion profiles after the removal of instrumentation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.280-283
• /
• 2010

척추경 나사못을 이용한 요추 유합술은 가장 보편적으로 사용되는 수술 적 치료 방법이다. 과거 여러 연구들에서 이러한 척추 유합술의 임상적 우수성은 이미 입증 되었으며, 척추경 나사못은 시술 부위의 운동을 완전히 제한함으로써 높은 유합율을 얻을 수 있으나, 상대적으로 인접 분절의 조기 퇴행성 변화의 요인 중 하나로 보고되고 있다. 또한 유합술을 수행 할 때 후방조직의 절제 또한 인접 분절의 퇴행을 초래하는 원인으로 보고되고 있다. 따라서 본 연구에서는 유한요소해석 방법을 이용하여 척추경 나사못 과 후방조직을 절제하는 시술 방법을 비교하여 척추체의 운동범위의 증가량을 계산하였고, 척추경 나사못 모델과 후방조직을 제거한 모델을 개발하여 시술하기 전 정상모델과 비교하였다. 개발된 모델과 정상 모델을 생체 역학적 측면에서 분석하여 인접분절의 조기 퇴행성 변화를 일으키는 가장 큰 원인이 무엇인지 정량적으로 분석하였고, 이를 근거 하여 임상적 효과와 그 이론적 근거를 제시하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.137-144
• /
• 2010

In general, spinal fusion surgery takes pressure off the pain induced nerves, by restoring the alignment of the spine. Therefore spinal fixation system is used to maintain the alignment of spine. In this study, a biomechanical study was performed comparing the SROM(Spinal Range Of Motion) of three types of system such as Rigid, Dynesys, and Fused system to analyze the behavior of spinal fixation system inserted in vertebra. Dynesys system, a flexible posterior stabilization system that provides an alternative to fusion, is designed to preserve inter-segmental kinematics and alleviate loading at the facet joints. In this study, SROM of inter-vertebra with spinal fixation system installed in the virtual vertebra from L4 to S1 is estimated. To compare with spinal fixation system, a simulation was performed by BRG. LifeMOD 2005.5.0 was used to create the human virtual model of spinal fixation system. Through this, each SROM of flexion, extension, lateral bending, and axial rotation of human virtual model was measured. The result demonstrates that the movement of Dynesys system was similar to normal condition through allowing the movement of lumbar.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.419-426
• /
• 2021

Purpose: In the surgical treatment of pyogenic lumbar spondylodiscitis, screw insertion at the affected vertebra has been avoided because of biofilm formation, and the risk of infection recurrence. The authors analyzed the success rate of infection treatment while minimizing the number of instrumented segments by inserting pedicle screws into the affected vertebrae. Therefore, this study examined the usefulness of this technique. Materials and Methods: From January 2000 to June 2018, among patients with pyogenic lumbar spondylodiscitis treated surgically, group A consisted of patients with pedicle screws inserted directly at the affected vertebrae (28 cases), and group B underwent fusion by inserting screws at the adjacent normal vertebrae due to bone destruction of the affected vertebral pedicle (20 cases). The classified clinical results were analyzed retrospectively. All patients were treated via the posterior-only approach, so the affected disc and sequestrum were removed. Posterior interbody fusion was performed with an autogenous strut bone graft, and the segments were then stabilized with pedicle screw systems. The hospitalization period, operation time, amount of blood loss, EQ-5D index, duration of intravenous antibiotics, and the clinical and radiological results were analyzed. Results: In group A, the number of instrumented segments, operation time, blood loss, and EQ-5D index at one month postoperatively showed significant improvement compared to group B. There were no significant differences in the duration of antibiotic use, hospitalization, radiological bone union time, sagittal angle correction rate, and recurrence rate. Conclusion: Minimal segmental fixation, in which pedicle screws were inserted directly into the affected vertebrae through the posterior approach, reduced the surgery time and blood loss, preserved the lumbar motion by minimizing fixed segments and showed rapid recovery without spreading or recurrence of infection. Therefore, this procedure recommended for the surgical treatment of lumbar pyogenic spondyodiscitis.

• Composites Research
• /
• v.34 no.3
• /
• pp.186-191
• /
• 2021

The lumbar spinal fusion is a treatment performed to restore the stability of the degenerated lumbar. In this study, the intervertebral discs between two or more segments are removed and a bone graft is inserted to harden the segments. The pedicle screw system is inserted to vertebral bodies to fix two or more segments so that they can be firmly fused. In this study, a total of 7 patient-specific lumbar finite element models were created and pedicle screw systems were installed. The connecting rods made of titanium and CFR-PEEK was inserted to the generated models. Finite element analysis was conducted for four representative spine behaviors and statistical analysis was performed to investigate the biomechanical effects by the material properties of connecting rods. The intradiscal pressure of adjacent segments and the range of motion of the joints of each segment were investigated. In the subjects who used CFR-PEEK instead of Ti for connecting rods, the intradiscal pressure of adjacent segments tend to decrease and the range of motion of each segment tend to increase. However, no statistically significant difference in tendency was observed under all loading conditions.