• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.653-663
• /
• 2000

A lot of hazardous wastes are discharged as by-products of working process by industrial development. Hazardous wastes is physical characteristics of difficult destruction at hight temperature. Numerical simulation and combustion experiment performed of dump incinerator for hazardous waste incineration. For the numerical simulation, the SIMPLEST algorithm was used to ensure rapid converge A K-$\varepsilon$ model was incorporate for the enclosure of turbulence flow. Combustion model was used by ESCRS (extended simple chemically reacting system) model available of CHEMKIN thermodynamic data for the source term of species conservation equation or energy equation. Radiation model is used by six flux model. A parametric screening studies was carried out through numerical simulation and experiment. Residence time and concentration in the incinerator was strongly dependent on the parameters of mixture velocity, mixture equilibrium ratio, surrogate velocity and surrogate equilibrium ratio.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09b
• /
• pp.131-137
• /
• 2010

`Frost heave' is volumetric extension behavior of soil due to freezing. It could have a bad effect to foundations of infrastructures like building, road, railroad and bridge. Therefore, it is considered as a primary design parameter with 'adfreeze bond' and 'creep deformation' for foundation design in cold region. In some countries, studies for analyzing frost heave in many ways have being performed, however, only a few studies for evaluating frost susceptibility of soils by measuring frost heave rate of frozen soils in Korea. For analyzing frost heave as a foundation design parameter, both frost heaving rate and heaving pressure are should be addressed in study. Hence, in this study, development of experimental apparatus to evaluate frost heave and pressure is suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1370-1378
• /
• 1996

A subjective video quality assessment methods are proposed based on CCIR Rec. 500-5 for an evaluation and testing of compressed video quality and performance of video codec to be designed in accordance with the MPEG-2 MP ML specification which is adapted as a DTV standard for Korea digital DBS. Video sequence compressed in compliance with MPEG-2 MP ML encoding parameterswastested by the proposed video quality evaluation procedure. Test sequence were compressed at the bit rate 6Mbps, 7.5Mbps and 9Mbps, repectively. Test results of the 7.5Mbps bitrate showed a satisfactory picture quality at about 4.0 on the 5.0 absolute scale of ITU-R 500-5.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.04a
• /
• pp.37-41
• /
• 1984

The error rate performance of amplitude phase keying system has been studied in the environment of cochannel interference and impulsive noise. We have derived the error probability equations of amplitude shift keying signal and phase shift keying signal, and combining the results, we have evaluated the circular APK signal which is the one of the several cases of APK arrays. Using the derived equations, the circular APK system has been evaluated in terms of carrier-to-noise power ratio(CNR), carrier-to-interferer power ratio(CIR), and impulsive index. The graphic results show us the best case and worst case of APK system, and good performance compared to the other systems in cochannel interference and impulsive noise.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.924-926
• /
• 1997

A high impedance fault(HIF) in a power system could be due to a downed conductor, and is a dangerous situation because the current may be too small to be detected by conventional means. In this paper, HIF(High impedance fault) and LIF(Low impedance fault) detection methods were reviewed. No single defection method can detect all electrical conditions resulting from downed conductor faults, because high impedance fault have arc phenomena, asymmetry and randomness. Neural network are well-suited for solving difficult signal processing and pattern recognition problem. This paper presents the application of artificial neural network(ANN) to detect the HIF and LIF. Test results show that the neural network was able to identify the high impedance fault by real-time operation. Furthermore, neural network was able to discriminate the HIF from the LIF.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.41-52
• /
• 2013

Forklift truck is one of the dangerous machines which causes the fatal accidents most frequently. The causes of fatalities by forklift from 2008 to 2011 were analyzed. Crushing the operator when tipping over or falling off a truck were the major causes of death in this study. The purpose of this study is to show measures from the engineering point of view to prevent the forklift truck accidents. In order for that, the domestic requirement for forklift safety was compared with those of foreign and international standards. The manufacturers' opinion was also collected regarding to improve the forklift safety. Several measures were suggested in order to prevent fatalities caused by forklift.

• KOREAN POULTRY JOURNAL
• /
• s.17
• /
• pp.16-29
• /
• 1971

국내에서 널리 쓰이고 있는 각종 농후사료에 대한 일반성분 및 Ca, P함량을 분석했고 또 비타민, 광물질, 아미노산 함량을 분석하기 위하여 46종의 사료에 대한 대표 시료를 분석했던 바 그 결과는 다음과 같다. 1. 옥수수, 밀, 소맥쇄, 미강(抽), 밀기울, 대두박(抽), 아마박(抽), 옥수수글루텐밀, 임박(抽), 채종박(抽), 호마박(抽), 골분, 어분(국산 및 외산), 패분등이 가장 수집빈도가 높았으며 대개의 경우 일반성분 분석치에 있어서는 미국 또는 일본의 그것과 큰 차이는 없었으나 분석시료 내용이 다른 경우에는 같은 사료라도 변이가 심하였다. 2. 분석치에 있어서 같은 사료라 할지라도 함량변이가 큰 것이 많았는데(말분, 소맥쇄, 맥강미강, 박류, 골분, 어분, 패분등) 이것은 수집된 샘플이 동일하지 않았고, 같은 사료라도 물리적 성상이 다르거나(말분등), 이 물의 혼입등<골분, 어분, 박류등>이 있었기 때문인 듯하다. 3. 선발된 46종 사료의 대표 샘플에 대하여 비타민, 광물질, 아미노산함량을 분석했던 결과를 보고하였으나 이것이 단 1회의 분석이었다는 점, 또는 어떤 성분은 분석이 안되었다는 점을 고려하여 장차의 보완 작업에 기대는 거는 바이다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.4
• /
• pp.479-485
• /
• 1996

Volatile organic compounds are air pollutants exhausting from industrial process, evaporation of solvent, and so on. Most of VOCs are the combustible gas of low calorific value as it is diluted by air. The systems burning such a hazardous gas need to increase enthalpy in order to increase flame stability. In this study an incinerator with reciprocating flow in the honeycomb ceramic has been used for the experiment of VOCs control. By the reciprocating flow system, the enthalpy of combustion gas is effectively regenerated into the enthalpy increases of the combustible gas through the honeycomb ceramic, which provides a heat storage. The position of the reaction zone is strongly dependent on the parameters of mixture velocity and time frequency. Flame front is changed to the point where burning velocity is coincided with burning velocity in the honeycomb ceramic. In this system it is important that flame front should be located symmetrically at the center of honeycomb ceramic for the purpose of increasing the reaction rate at one point. Peak temperature becomes higher with decreasing time frequency, at which the flow direction is regularly reversed.

• The Bulletin of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.44.1-44.1
• /
• 2009

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1181-1192
• /
• 2008

A laboratory investigation was carried out into effects of strain rate on undrained shear behavior of Holocene clay underneath Kobe Airport with an objective to evaluate the factor of safety of the retaining structure built on it. It was examined in a series of triaxial compression and extension tests performed using different rate of axial straining. A comparative compression test in which the strain rate was changed in steps was also carried out. Similar tests were performed in constant-volume direct shear box (DSB) test. And, the deformation characteristics of the clay were also examined in order to evaluate the variation of stiffness during undrained shearing. It was found that the undrained strength increased with not only the shear rate but also the consolidation period. ISOTACH properties seemed a key to govern the undrained shear behavior.