• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.407-413
• /
• 2010

In DCA (Dynamic Channel Allocation) scheme of uplink cellular system appling a frequency reuse factor of one, when a new call requests a channel, the new call will be blocked if its SINR (Carrier to Noise and Interference Ratio) is less than the required SINR or there is no available channel. The additional channel allocation for the blocked new call can be performed with channel borrowing in the adjacent cells. The channel borrowing causes the CCI (Co-Channel Interference), thus the SINR of the existing calls is deteriorated and the channel reallocation for the existing calls is required. As a result, the channel borrowing leads to a complex calculation so that it is a NP-hard problem. Therefore, to overcome the problem, we propose a novel Group Search-based DCA scheme which decreases the number of the blocked new calls and then reduces the number of the channel reallocation by the channel borrowing for the blocked new calls. The proposed scheme searches the all channels in a group of the adjacent cells and home cell at the same time in order to minimizes the number of the blocked new calls. The simulation results show that proposed Group Search-based DCA scheme provides better new call blocking probability and system throughput than the existing Single Search-based DCA scheme which searches only the channels in home cell.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.171-174
• /
• 2010

무선 통신 환경에서 간섭과 잡음으로 인한 채널 추정 오류는 데이터 검출을 위한 등화 성능을 현저하게 저하시킨다. 포스트 프로세싱은 채널 추정 이후에 이러한 추정 오류를 줄이기 위한 작업이며, 여기서는 소수의 채널 계수만이 무선 채널의 다중 경로에 의한 신호 성분을 갖는 무선 채널의 특성을 이용하여 신호 성분을 포함하지 않은 계수를 선별하고 이를 제거함으로써 채널 추정 오류를 줄이는 방법을 위한 순환 알고리즘을 제안한다. 기존 알고리즘은 잡음 분산을 기준으로 문턱값을 결정하고, 그 문턱 값보다 작은 계수는 신호성분을 포함하지 않는다고 간주하여 이를 제거하였다. 제안된 순환 알고리즘은 잡음 분산의 추정치를 반복이 진행됨에 따라 갱신하여 이를 기준으로 구한 문턱값을 이용한 포스트 프로세싱을 반복함으로써 채널 추정 성능을 개선시킨다. 제안된 방법은 기존의 방법과 유사한 복잡도를 갖는 반복 횟수를 적용하는 경우에 월등히 성능이 개선되며, 특히 반복 횟수를 조절함으로써 처리 시간과 채널 추정 성능을 최적화할 수 있는 유연성을 갖고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1445-1452
• /
• 2000

In general, the communication channel can be modeled as inter-symbol interference(ISI) and additive white gaussian noise channel. Viterbi algorithm is optimum detector for transmitted data at transmitter, but it needs large computational complexity. For the sake of this problem, adaptive equalizers are employed for channel equalization which is not attractive for mixed phase channel. In this paper, we propose the effective new channel equalizer for mixed phase channel and show the better performance than previous equalizers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.1006-1013
• /
• 2009

This paper proposes a data stream allocation technique for fair capacity performance in multiuser multiple-input multiple-output (MIMO) systems using block diagonalization (BD) algorithm. Conventional studies have been focused on maximum sum capacity. Thus, there is a very large difference of capacity among users, since user capacity unfairly distributed according to each user channel environment. In additional, poor channel user has very small capacity, since base station allocates the power by using water-filling technique. Also, almost studies limited itself to obtain the additional gain by using the same number of data streams for all users. In this paper, we propose the technique for maximizing sum capacity under the fair performance constraint by allocating data stream according to user channel environment. Also, proposed algorithm has more gain of sum capacity and transmit power than conventional equal allocation via computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.805-810
• /
• 2016

The dependence of drain induced barrier lowering(DIBL) is analyzed for doping concentration in channel of asymmetric double gate(DG) MOSFET. The DIBL, the important short channel effect, is described as lowering of source barrier height by drain voltage. The analytical potential distribution is derived from Poisson's equation to analyze the DIBL, and the DIBL is observed according to top/bottom gate oxide thickness and bottom gate voltage as well as channel doping concentration. As a results, the DIBL is significantly influenced by channel doping concentration. DIBL is significantly increased by doping concentration if channel length becomes under 25 nm. The deviation of DIBL is increasing with increase of oxide thickness. Top and bottom gate oxide thicknesses have relation of an inverse proportion to sustain constant DIBL regardless channel doping concentration. We also know the deviation of DIBL for doping concentration is changed according to bottom gate voltage.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.94-102
• /
• 1999

This paper is related with the compensation of communication channel characteristics using predistorter, and the considered characteristic is the additive noise, phase rotation and frequency selective fading which occurred in communication channel. Predistorter can minimize the effect of obstacle element which occured in channel at receiving side by transmitting the predistortion of signal after modulation, the coefficient of inverse electrical charateristic of communication channel is performed at transmitting side. For this purpose, the predistorter is designed by using Tricepstrum Equalization Algorithm which is adaptive equlizer algorithm, and the receiving side must transmit the probing signal to transmitting side. Using the probing signal, the transmitting side can obtain the inverse characteristic coefficient of communication channel, and this probing signal must be transmitted periodically. We assumed that the channel characteristic do not change during this one period. As a result of computer simulation, we confirmed that the performance of predistorter was fairly good as same as the adaptive equalizer, and this technique have a effectiveness that can be used in the forward channel of mobile communication in order to achieve high speed transmission.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.1
• /
• pp.69-74
• /
• 2017

The validity of friction factor theory, based upon conventional-sized passages for microchannel flows, is an active area of research. The high surface to volume ratio of a microchannel offers many advantages over macroscale devices and processes. This study focused on the laminar flow (16$161{\mu}m$ to $664{\mu}m$ for single-phase liquid flow. A controllable syringe pump was used to provide flow while a differential pressure transducer was used to record the pressure drop. These results demonstrated that a 3D printer can drastically simplify custom microchannel fabrication and still support complex features, which are typically only accessible with advanced fabrication techniques.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.110-110
• /
• 2017

마이크로 플루이딕 디바이스는 화학, 생물학 실험 및 생체 의학 진단을 위한 플랫폼으로 지난 20년간 그 사용 및 연구가 증가되어 왔다. 마이크로 플루이딕 디바이스를 제작하는 데 있어 가장 일반적으로 사용되는 재료는 실리콘이지만 비용이 많이 들고 불투명하므로 광학 검출이 필요한 곳에 적용이 제한된다. 이러한 측면에서 열가소성 플라스틱은 상업화의 중요한 요소인 대량 생산에 있어 큰 잠재력을 가지고 있으며 저렴하고, 가공이 쉽고, 유연하고, 광학적으로 투명하고, 화학적으로 불활성이며, 생체적합성을 가진다. 본 연구에서는 열가소성 플라스틱의 일종인 PMMA Poly(methylmethacrylate)를 효율적으로 접합하기 위해 비교적 낮은 온도와 낮은 압력에서 에탄올을 활용한 접착방식을 개발하였다. 먼저, PMMA 기판의 전체 표면을 $80^{\circ}C$에서 20 분 동안 에탄올로 처리한 후, $60^{\circ}C$에서 20 분간 열 압착하는 방식으로 영구적인 결합이 이루어졌다. 결합 강도 및 채널의 sealing 정도를 확인하기 위해, 인장 강도, 누수 및 파열 테스트를 수행하였다. 결합강도는 약 12.4 MPa로 타 연구와 비교할 때 매우 높았으며 마이크로 채널의 전체 내부 체적보다 거의 450 배 높은 강한 액체 흐름을 견딜 정도로 견고한 결합이 유지되었다. 열가소성 플라스틱의 본딩에 사용되는 유기 용매는 광학 특성을 희생시키지 않으면서 결합 속도를 높일 수 있지만, 결합 공정 중에 용매로 인해 마이크로 채널이 막히는 현상이 발생될 수 있다. 따라서, 견고한 본딩을 유지하면서 채널 막힘을 방지하기 위해 마이크로 채널을 소수성으로 선택적으로 처리하여 내벽의 표면 특성을 튜닝해 주는 기법을 추가로 적용하였다. 본 연구에서 사용한 방법은 아민-PDMS (polydimethylsiloxane) 링커를 적용하여 기판 표면의 극성을 변경시켜 주었다. 아민-PDMS 링커는 PC (polycarbonate), PET (polyethylene terephthalate), PVC (polyvinyl chloride) 및 PI (polyimide)와 같은 다양한 열가소성 플라스틱의 표면 소수성을 현저히 증가시키며 화학적, 열적 안정성이 뛰어나다. 아민-PDMS 링커는 PMMA의 카보닐 그룹과 반응할 수 있는 아민 사이드 그룹을 포함하는 PDMS 백본으로 구성되며 처리된 대상표면을 소수성으로 만든다. 아민-PDMS 링커 처리 이후 채널은 소수성으로 변화되었으며 이는 접촉각(contact angle)의 증가로 확인되었다. 코팅된 채널을 에탄올로 30분간 80도에서 처리하여도 소수성은 그대로 유지되어 마이크로 채널의 선택적인 소수성 코팅이 성공적으로 수행되었다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.25-35
• /
• 2015

Handoff is a critical issue for seamless roaming in IEEE 802.11-based wireless networks. In order to provide real-time services, handoff mechanism must be provided. However, the IEEE 802.11 standard handoff is not appropriate to provide the services, because it is based on the full-scanning approach which spends too much time searching Access Point (AP). In this paper, we propose a new scheme, which can reduce the scanning latency. A station performs full-scanning operation for finding APs when it enters wireless networks for the first time. The station sends the scanned channel information to AP. AP maintains the neighbor channel table based on the information received from stations. A station performs the partial-scanning by using the table. Therefore, the proposed scheme can reduce the scanning latency.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.53-63
• /
• 2008

Reader collision may occur when neighboring RFID readers use the same channel at the same time. Especially when the readers are operated in dense mode, even though many channels are available, because of frequent reader collisions we can not guarantee the performance of RFID readers. Conventional solutions such as FH(Frequency Hopping) or LBT(Listen Before Talk) are not effective in this situation because they can not schedule RFID readers effectively when RFID readers are operated in multi-channel, dense reader mode, In this paper, we propose a new RFID reader anti-collision algorithm which employs LBT, random backoff before channel access, and probabilistic channel hopping at the same time. While LBT and Random backoff before channel access reduces collisions between competing readers, probabilistic channel hopping increases channel utilization by adaptively changing the hopping probability by reflecting the reader density and utilization. Simulation results shows that our algorithm outperforms conventional methods.