• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.941-950
• /
• 2011

In this paper, we analysis the end-to-end performance of the incremental cooperative communication with relay selection. In the conventional cooperative scheme, the source(S) broadcasts the signal to the relay(R) and the destination(D) at 1st phase, and the R forwards the signal to the D at 2nd phase. Although this scheme can improve performance and provide diversity gain, it suffers from decreasing spectrum efficiency. In order to overcome this problem, the incremental cooperative model can be used. In this paper, we study two incremental cooperative method : the first uses ARQ with threshold SNR and the second uses HARQ with channel coding. we also evaluated performance of the incremental cooperative communication based on the R arrangement by using both methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.123-125
• /
• 2015

Wireless ad hoc network which is comprised of wireless nodes that have the limited communication range is utilized to monitoring disaster area, tracing object, and tactical system. But in the case of wireless node on the ground, a network performance decrease because wireless channel is affected from obstacle or the node deployment is restricted. In this paper, we consider wireless network based on UAV(Unmanned Aerial Vehicle) which has little spatial constraint and quickly deploy a position. We implement test-bed included ground nodes and UAV, and measure throughput and PDR(Packet Delivery Ratio) according to the usage of UAV. We show that network performance is improved by relaying data on UAV.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.96-102
• /
• 2022

Reactants of PEMFC are hydrogen and oxygen in gas phases and fuel cell overpotential could be reduced when reactants are smoothly transported. Numerous studies to modify cathode flow field design have been conducted because oxygen mass transfer in high current density region is dominant voltage loss factor. Among those cathode flow field designs, a block in flow field is used to forced supply reactant gas to porous gas diffusion layer. In this study, the block was installed on a simple fuel cell model. Using computational fluid dynamics (CFD), effects of forced convection due to blocks on a polarization curve and local current density contour were studied when different air flow rates were supplied. The high current density could be achieved even with low air supply rate due to forced convection to a gas diffusion layer and also with multiple blocks in series compared to a single block due to an increase of forced convection effect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.739-752
• /
• 2002

Recently, to utilize the limited bandwidth effectively, the concept of partial response (PR) signaling has widely been adopted in both the high-speed data transmission and high-density digital recording/playback systems such as digital microwave, digital subscriber loops, hard disk drives, digital VCR's and digital versatile recordable disks and so on. This paper is concerned with adaptive equalization of partial response channels particularly for the magnetic recording channels. Specifically we study how the PR channel equalizers work for different choices of desired or reference signals used for adjusting the equalizer weights. In doing so, we consider three different configurations that are actually implemented in the commercial products mentioned above. First of all, we show how to compute the theoretical values of the optimum Wiener solutions derived by minimizing the mean-squared error (MSE) at the equalizer output. Noting that this equalizer MSE measure cannot be used to fairly compare the three configurations, we propose to use the data MSE that is computer just before the final detector for the underlying PR system. We also express the data MSE in terms of the channel impulse response values, source data power and additive noise power, thereby making it possible to compare the performance of the configurations under study. The results of extensive computer simulation indicate that our theoretical derivation is correct with high precision. Comparing the three configurations, it also turns out that one of the three configurations needs to be further improved in performance although it has an apparent advantage over the others in terms of memory size when implemented using RAM's for the decision feedback part.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.613-620
• /
• 2021

A flow channel shape of PEMFC has an influence on the internal flow uniformity. If the reactant distribution in a flow path is not uniform during operation, both catalyst deactivation and mechanical damage of membrane could occur resulting in decreasing the membrane electrode assembly (MEA) durability. Numerous studies concerning flow design have been conducted to make smooth supply and uniform distribution of reactants in fuel cells. The baffle of flow path could improve fuel cell performance through the forced convection effect. A sub-channel, as an additional air flow path, could increase the reactant concentration and reduce the mass transfer loss via a smooth water discharge. In this study, computational fluid dynamics (CFD) was used to analyze the effect of blocks and sub-channels on the current density and oxygen concentration of the fuel cell. As a result, the limit current density and oxygen concentration at a rear block increased when using blocks and sub-channels in a flow channel. In particular, the current density increased significantly when the sub-channel was placed between two blocks. Also, the sub-channel position was optimized by analyzing the oxygen concentration, and the oxygen concentration was recovered at a rear block in the fuel cell.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.305-310
• /
• 2006

TV 프로그램 전송 방식이 아날로그에서 디지털로 바뀌며, TV방송의 다채널화 현상이 일어나고 있다. 동시에 많은 채널을 시청하며, 정보를 습득하고자 하는 바쁜 현대인들에게 두 개 이상의 채널을 동시에 시청하면서, 이를 녹화하거나 모니터링 하고자 하는 Need가 점점 높아져 가고 있다. 두 개의 튜너를 이용하여 두 채널의 방송을 동시에 시청 할 수 있는 PIP(Picture in Picture-동시화면) 기능은 이러한 사용자 욕구를 해소함과 동시에, 프리미엄 TV의 기술적 특성으로 자리잡고 있다. 현재 LG전자 TV의 경우, PIP관련 기능은 5가지로 [동시화면] [부채널+] [부채널 -] [부화면 입력][주부전환] 이 있다. 이러한 PIP관련 기능은 리모컨에서 부가기능 버튼으로 동작하고 있으며, 리모컨 레이아웃의 복잡성을 증대시키는 큰 원인이 되고 있다. 특히 관련 버튼이 숨김 버튼으로 배치되어 있어 사용자는 버튼을 찾지 못하고 오히려TV OSD 메뉴 상에서 PIP기능을 찾는 오류를 범하고 있어 직관적인 사용성을 제안하지 못하고 있다. 따라서 본 연구에서는 리모컨에서 PIP관련 버튼을 줄임과 동시에 PIP 사용성을 높일 수 있는 개선안을 제안하고자 하였다. 연구 방법은 PIP 사용행태 분석을 통한 문제점 파악 후 2가지 개선안을 도출한 후 각각의 개선안에 대한 사용성 검증을 실시하였다. 그 결과, 기존의 리모컨 버튼으로 접근하는 것이 사용성이 더 좋을 것이라는 예상을 깨고, PIP기능 사용 시 OSD메뉴로 접근하는 것이 수행시간이 줄어들었음을 알 수 있었다. 이것은 TV라는 매체의 특성상 사용자는 TV화면에서 기능 수행 후 Feedback을 기대하며, TV화면 상에서 동작하는 것에 더 익숙하기 때문이다. 이는 향후 새로운 TV기능 구현 시 중요한 Impact로 작용할 수 있다. 그 이유는 리모컨 버튼을 활용하여 모든 기능을 수행하는 것보다, 특정 기능은 OSD상에서 구현하는 것이 TV의 직관적인 사용 Scene에 더 적합한 것을 파악할 수 있었기 때문이다.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.7-11
• /
• 2017

In this paper, we have studied the characteristics of NAND Flash memory in SONOS Poly-Si Thin Film Transistor (Poly-Si TFT) device. Source/drain junctions(S/D) of cells were not implanted and selective transistors were located in the end of cells. We found the optimum conditions of process by means of the estimation for the doping concentration of channel and source/drain of selective transistor. As the doping concentration was increased, the channel current was increased and the characteristic of erase was improved. It was believed that the improvement of erase characteristic was probably due to the higher channel potential induced by GIDL current at the abrupt junction. In the condition of process optimum, program windows of threshold voltages were about 2.5V after writing and erasing. In addition, it was obtained that the swing value of poly Si TFT and the reliability by bake were enhanced by increasing process temperature of tunnel oxide.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.161-169
• /
• 2017

The present study investigated the effect of the rib arrangement and a guide vane for enhancing internal cooling of the blade. Two types of rib arrangements were used in the first and second passage in parallel. Aspect ratio of the channel was 5 and a fixed Reynolds number based on hydraulic diameter was 10,000. The attack angle of rib was $60^{\circ}$, rib pitch-to-height ratio (p/e) was 10, and the rib height-to-hydraulic-diameter ratio ($e/D_h$) was 0.075. The effect of an interaction between Dean vortices and the secondary vortices from the first passage was observed. Overall, the attack angle of rib in the first passage was dominant factor to heat transfer and flow patterns in turning region. Also, the channel with a guide vane showed enhanced heat transfer at the tip surface with reducing flow separation and recirculation.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.59-65
• /
• 2013

Recently, the digital television transition from analog television to digital television has been progressing in terrestrial broadcasting. As a result of the DTV transition, additional reassignments and deployments of TV White spaces (TVWS) caused by co-channel interference (CCI) were needed. In this paper, we investigate the TVWS caused by CCI using Longley-Rice and ITU-R P.1546 propagation model, which are the most widely-used propagation model. In addition, we analyze the service coverage radius and CCI radius according to the height of transmitter antenna and transmitting power. The results show that the ratios of CCI radius to service coverage radius in Longley-Rice and ITU-R P.1546 propagation model are about 2.54 and 2.07, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.616-624
• /
• 2011

The flow characteristics and heat transfer augment on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow has been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio were 0.07 and rib height to channel height ratio was set as e/H=0.117 for various PR(rib pitch-to-rib height rate) between 8~14, respectively. The SST k-${\omega}$ turbulence model and v2-f turbulence model were used to find out the heat transfer and the flow characteristics of near the wall which are suited to obtain realistic phenomena. The numerical analysis results show turbulent flow characteristics, heat transfer enhancement and friction factor as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow. and v2-f turbulence model simulation results have a good agreement with experimental values.